Winkler's method overestimates dissolved oxygen in seawater: Iodate interference and its oceanographic implications

Dissolved oxygen in seawater has been determined by using the Winkler's reaction scheme for decades. An interference in this reaction scheme that has been heretofore overlooked is the presence of naturally occurring iodate in seawater. Each mole of iodate can result in an apparent presence of 1.5 mol of dissolved oxygen. At the concentrations of iodate in the surface and deep open ocean, it can lead to an overestimation of 0.52 ± 0.15 and 0.63 ± 0.05 μmol kg^− 1 of oxygen in these waters respectively. In coastal and inshore waters, the effect is less predictable as the concentration of iodate is more variable. The solubility of oxygen in seawater was likely overestimated in data sources that were based on the Winkler's reaction scheme for the determination of oxygen. The solubility equation of García and Gordon [Garcia H.E., Gordon, L.I., 1992. Oxygen solubility in seawater: Better fitting equations. Limnol. Oceanogr. 37, 1307–1312] derived from the results of Benson and Krause [Benson, F.B., Krause, D. Jr., 1984. The concentration and isotopic fractionation of oxygen dissolved in freshwater and seawater in equilibrium with the atmosphere. Limnol. Oceanogr. 29, 620–632] is free from this source of error and is recommended for general use. By neglecting the presence of iodate, the average global super-saturation of oxygen in the surface oceans and the corresponding efflux of oxygen to the atmosphere both have been overestimated by about 8%. Regionally, in areas where the degree of super-saturation or under-saturation of oxygen in the surface water is small, such as in the tropical oceans, the net air–sea exchange flux can be grossly under- or overestimated. Even the estimated direction of the exchange can be reversed. Furthermore, the presence of iodate can lead to an overestimation of the saturation anomaly of oxygen in the upper ocean attributed to biological production by 0.23 ± 0.07%. AOU may have been underestimated by 0.52 ± 0.15 and 0.63 ± 0.05 μmol kg^− 1 in the surface mixed layer and deep water, while preformed phosphate and preformed nitrate may have been overestimated by 0.004 ± 0.001 and 0.06 ± 0.02 μmol kg^− 1 in the surface mixed layer, and 0.005 ± 0.0004 and 0.073 ± 0.006 μmol kg^− 1 in the deep water. These are small but not negligible corrections, especially in areas where the values of these parameters are small. At the increasing level of sophistication in the interpretation of oxygen data, this source of error should now be taken into account. Nevertheless, in order to avoid confusion, an internationally accepted standard needs to be adopted before these corrections can be applied.     

Distribution of diagenetic alterations within depositional facies and sequence stratigraphic framework of fluvial sandstones: Evidence from the Petrohan Terrigenous Group,Lower Triassic,NW Bulgaria

Sequence stratigraphy of fluvial deposits is a controversial topic because changes in relative sea level will eventually have indirect impact on the spatial and temporal distribution of depositional facies. Changes in the relative sea level may influence the accommodation space in fluvial plains, and hence have impact on types of fluvial system, frequency of avulsion, and style of vertical and lateral accretion. This study aims to investigate whether depositional facies and changes in the fluvial system of the Lower Triassic Petrohan Terrigenous Group sandstones (NW Bulgaria) in response to changes in the relative sea level have an impact on the spatial and temporal distribution of diagenetic alterations.     

Effects of pulsed nutrient inputs on phytoplankton assemblage structure and blooms in an enclosed coastal area

The response of phytoplankton assemblage structure to terrestrial nutrient inputs was examined for the Gulf of Kalloni in the Northern Aegean Sea, a productive semi-enclosed coastal marine ecosystem. The study was focused on a typical annual cycle, and emphasis was placed on the comparative analysis between blooms developing after significant nutrient inputs from the watershed, and naturally occurring blooms. Baseline information was collected on a monthly basis from a network of stations located in the oligotrophic open sea and the interior and more productive part of the embayment. Intensive sampling was also carried out along a gradient in the vicinity of a river which was the most important source of freshwater and nutrient input for the Gulf. Phytoplankton assemblage structure was analyzed from 188 samples using diversity indices (Shannon and Average Taxonomic Distinctness), multivariate plotting methods (NMDS), multivariate statistics (PERMANOVA), and canonical correspondence analysis (CCA). Three characteristic assemblages were recognized: (1) an autumn assemblage developed under nutrient depleted conditions, having low diversity due to the dominance of two small diatoms, (2) a winter bloom of the potentially toxic species Pseudo-nitzschia calliantha occurring immediately after a nutrient peak and characterized by very low diversity, and (3) a naturally occurring early summer bloom of centric diatoms with relatively high diversity. The results of the study support the view that moderate nutrient inputs may have a beneficial effect on the functioning of coastal ecosystems, stimulating the taxonomic diversity through the growth of different taxonomic groups and taxa. On the other hand, a sudden pulse of high nutrient concentrations may greatly affect the natural succession of organisms, have a negative effect on the diversity through the dominance of a single species, and can increase the possibility of a harmful algal bloom development.     

A study of the chemistry of iodine and bromine in marine sediments

Several recent marine sediments were treated with eleven chemical reagents in order to ascertain the iodine and bromine species present. The sediments were analyzed before and after each treatment to determine which reagents released the bound halogens. By a process of elimination it is concluded that the iodine is present primarily in its electro-positive state as N-iodoamides while bromine exists in many different chemical forms.     

Predicting saturation of gas hydrates using pre-stack seismic data, Gulf of Mexico

A promising method for gas hydrates exploration incorporates pre-stack seismic inversion data, elastic properties modeling, and seismic interpretation to predict saturation of gas hydrates (Sgh). The technology can be modified slightly and used for predicting hydrate concentrations in shallow arctic locations as well. Examples from Gulf of Mexico Walker Ridge (WR) and Green Canyon (GC) protraction areas illustrate how Sgh was derived and used to support the selection of well locations to be drilled for gas hydrates in sand reservoirs by the Chevron-led Joint Industry Project (JIP) Leg II cruise in 2009. Concentrations of hydrates were estimated through the integration of seismic inversion of carefully conditioned pre-stack data, seismic stratigraphic interpretation, and shallow rock property modeling. Rock property trends were established by applying principles of rock physics and shallow sediment compaction, constrained by regional geological knowledge. No nearby sonic or density logs were available to define the elastic property trends in the zone of interest. Sgh volumes were generated by inverting pre-stack data to acoustic and shear impedance (PI and SI) volumes, and then analyzing deviations from modeled impedance trends. In order to enhance the quality of the inversion, we stress the importance of maximizing the signal to noise ratio of the offset data by conditioning seismic angle gathers prior to inversion. Seismic interpretation further plays an important role by identifying false anomalies such as hard, compact strata, which can produce apparent high Sgh values, and by identifying the more promising strata and structures for containing the hydrates. This integrated workflow presents a highly promising methodology, appropriate for the exploration of gas hydrates.     

Private rights,public benefits: Industry-driven seabed protection

New Zealand has a large exclusive economic zone (EEZ) that contains a variety of marine habitats and commercially-important species. The commercial fishing industry operating within New Zealand's EEZ is of significant value to the economy and fisheries resources are managed through the extensive use of Individual Transferable Quotas (ITQs). One of the benefits of ITQs has been to better align some of the private incentives of quota owners with the public interest. These incentives contributed to an initiative proposed by the fishing industry to close large areas of New Zealand's EEZ to protect the seabed from trawling. These closed areas are termed benthic protection areas (BPAs) and protect the benthic biodiversity of about 1.1 million square kilometres of seabed—approximately 30% of New Zealand's EEZ. A significant proportion of New Zealand's known seamounts and active hydrothermal vents are protected by these closed areas. We describe and discuss the criteria used to select BPAs and some of the criticism of this marine protection initiative. We argue that the assignment of strong property rights in fishing resources was an important precondition to an industry initiative that has a significant public benefit. Where private and public interests are well aligned, government can adopt an enabling and facilitation role, ceding direct control of processes in order to get the results the align with the public interest.     

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.     

Foreword

Destructive earthquakes have caused great damage in China and the United States and collapsing buildings have caused many deaths and injuries. The field of earthquake engineering studies     

Passive microwave remote sensing of the historic February 2010 snowstorms in the Middle Atlantic region of the USA

The snowfall in the Baltimore/Washington metropolitan area during the winter of 2009/2010 was unprecedented and caused serious snow‐related disruptions. In February 2010, snowfall totals approached 2 m, and because maximum temperatures were consistently below normal, snow remained on the ground the entire month. One of the biggest contributing factors to the unusually severe winter weather in 2009/2010, throughout much of the middle latitudes, was the Arctic Oscillation. Unusually high pressure at high latitudes and low pressure at middle latitudes forced a persistent exchange of mass from north to south. In this investigation, a concerted effort was made to link remotely sensed falling snow observations to remotely sensed snow cover and snowpack observations in the Baltimore/Washington area. Specifically, the Advanced Microwave Scanning Radiometer onboard the Aqua satellite was used to assess snow water equivalent, and the Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder were employed to detect falling snow. Advanced Microwave Scanning Radiometer passive microwave signatures in this study are related to both snow on the ground and surface ice layers. In regard to falling snow, signatures indicative of snowfall can be observed in high frequency brightness temperatures of Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder. Indeed, retrievals show an increase in snow water equivalent after the detection of falling snow. Yet, this work also shows that falling snow intensity and/or the presence of liquid water clouds impacts the ability to reliably detect snow water equivalent. Moreover, changes in the condition of the snowpack, especially in the surface features, negatively affect retrieval performance. Copyright © 2011. This article is a U.S. Government work and is in the public domain in the USA.     

Explicit integration of bounding surface model for the analysis of earthquake soil liquefaction

This paper presents a new plasticity model developed for the simulation of monotonic and cyclic loading of non‐cohesive soils and its implementation to the commercial finite‐difference code FLAC, using its User‐Defined‐Model (UDM) capability. The new model incorporates the framework of Critical State Soil Mechanics, while it relies upon bounding surface plasticity with a vanished elastic region to simulate the non‐linear soil response. Stress integration of constitutive relations is performed using a recently proposed explicit scheme with automatic error control and substepping, which so far has been employed in the literature only for constitutive models aiming at monotonic loading. The overall accuracy of this scheme is evaluated at element level by simulating cyclic loading along complex stress paths and by using iso‐error maps for paths involving change of the Lode angle. The performance of the new constitutive model and its stress integration scheme in complex boundary value problems involving earthquake‐induced liquefaction is evaluated, in terms of accuracy and computational cost, via a number of parametric analyses inspired by the successful simulation of the VELACS centrifuge Model Test No. 2 studying the lateral spreading response of a liquefied sand layer. Copyright © 2009 John Wiley & Sons, Ltd.