Apparent counter-gradient heat fluxes generated by atmospheric waves

In studies of turbulence, tower data are used to measure vertical fluxes of momentum and heat generated by correlations in the fluctuating fields. Similar time averages of wu and w may be computed for an interval of wave activity observed at an instrumented tower. However, it is shown that such measurements do not necessarily correspond to the conventional Reynold's stresses or vertical heat fluxes. And waves can appear to have non-zero and even countergradient fluxes when proper averages show no fluxes at all.These spurious fluxes are generated by the method of analysis, a Fourier series performed on a finite time interval. Any background disturbance that is not strictly confined to the interval will generate a spurious wave spectrum. In particular, long-period waves will generate terms that interfere with the true high frequency waves to give false wave fluxes. The theoretical findings of this paper provide a ready explanation of tower data that would otherwise appear to conflict with conventional wave theory.     

Interpretation of dynamic retaining wall model tests in light of elastic and plastic solutions

The dynamic response of rigid and flexible walls retaining dry cohesionless soil is examined in light of experimental results and analytical elastodynamic and limit analysis solutions. Following a brief review of the problem, experimental findings from three different testing programs on retaining walls are presented, and compared with theoretical predictions based on the above-mentioned approaches. Reasonable agreement is found depending on the assumptions. It is shown that wall flexibility – which is not taken into account in classical design approaches – should be considered to establish the point of application of seismic thrust on the wall. Detailed calculations and set of graphs and charts are presented, which highlight salient aspects of the problem.     

Melting and phase relations in the plane tholeiite-lherzolite-nepheline basanite to 40 kilobars with geological implications

Six crystalline mixtures, picrite, olivine-rich tholeiite, nepheline basanite, alkali picrite, olivine-rich basanite, and olivine-rich alkali basalt were recrystallized at pressures to 40 kb, and the phase equilibria and sequences of phases in natural basaltic and peridotitic rocks were investigated.The picrite was recrystallized along the solidus to the assemblages (1) olivine+orthopyroxene+ clinopyroxene +plagioclase+spinel below 13 kb, (2) olivine+orthopyroxene+clinopyroxene+spinel between 13 kb and 18 kb, (3) olivine+orthopyroxene+clinopyroxene+ garnet+spinel between 18 kb and 26 kb, and (4) olivine+clinopyroxene+garnet above 26 kb. The solidus temperature at 1 atm is slightly below 1,100° and rises to 1,320° at 20 kb and 1,570° at 40 kb. Olivine is the primary phase crystallizing from the melt at all pressures to 40 kb.The olivine-rich tholeiite was recrystallized along the solidus into the assemblages (1) olivine+ clinopyroxene+plagioclase+spinel below 13 kb, (2) clinopyroxene+orthopyroxene+ spinel between 13 kb and 18 kb, (3) clinopyroxene+garnet+spinel above 18 kb. The solidus temperature is slightly below 1,100° at 1 atm, 1,370° at 20 kb, and 1,590° at 40 kb. The primary phase is olivine below 20 kb but is orthopyroxene at 40 kb.In the nepheline basanite, olivine is the primary phase below 14 kb, but clinopyroxene is the first phase to appear above 14 kb. In the alkali-picrite the primary phase is olivine to 40 kb. In the olivine-rich basanite, olivine is the primary phase below 35 kb and garnet is the primary phase above 35 kb. In the olivine-rich alkali basalt the primary phase is olivine below 20 kb and is garnet at 40 kb.Mineral assemblages in a granite-basalt-peridotite join are summarized according to reported experimental data on natural rocks. The solidus of mafic rock is approximately given by T=12.5 P _Kb+1,050°. With increasing pressure along the solidus, olivine disappears by reaction with plagioclase at 9 kb in mafic rocks and plagioclase disappears by reaction with olivine at 13 kb in ultramafic rocks. Plagioclase disappears at around 22 kb in mafic rocks, but it persists to higher pressure in acidic rocks. Garnet appears at somewhat above 18 kb in acidic rocks, at 17 kb in mafic rocks, and at 22 kb in ultramafic rocks.The subsolidus equilibrium curves of the reactions are extrapolated according to equilibrium curves of related reactions in simple systems. The pyroxene-hornfels and sanidinite facies is the lowest pressure mineral facies. The pyroxene-granulite facies is an intermediate low pressure mineral facies in which olivine and plagioclase are incompatible and garnet is absent in mafic rocks. The low pressure boundary is at 7.5 kb at 750° C and at 9.5 kb at 1,150° C. The high pressure boundary is 8.0 kb at 750° C and 15.0 kb at 1,150° C. The garnet-granulite facies is an intermediate high pressure facies and is characterized by coexisting garnet and plagioclase in mafic rocks. The upper boundary is at 10.3 kb at 750° C and 18.0 kb at 1,150° C. The eclogite facies is the highest pressure mineral facies, in which jadeite-rich clinopyroxene is stable.Compositions of minerals in natural rocks of the granulite facies and the eclogite facies are considered. Clinopyroxenes in the granulite-facies rocks have smaller jadeite-Tschermak's molecule ratios and higher amounts of Tschermak's molecule than clinopyroxenes in the eclogite-facies rocks. The distribution coefficients of Mg between orthopyroxene and clinopyroxene are normally in the range of 0.5–0.6 in metamorphic rocks in the granulite facies. The distribution coefficients of Mg between garnet and clinopyroxene suggest increasing crystallization temperature of the rocks in the following order: eclogite in glaucophane schist, eclogite and granulite in gneissic terrain, garnet peridotite, and peridotite nodules in kimberlite.Temperatures near the bottom of the crust in orogenic zones characterized by kyanitesillimanite metamorpbism are estimated from the mineral assemblages of metamorphic rocks in Precambrian shields to be about 700° C at 7 kb and 800° C at 9 kb, although heat-flow data suggest that the bottom of Precambrian shield areas is about 400° C and the eclogite facies is stable.The composition of liquid which is in equilibrium with peridotite is estimated to be close to tholeiite basalt at the surface pressure and to be picrite at around 30 kb. The liquid composition becomes poorer in normative olivine with decreasing pressure and temperature.During crystallization at high pressure, olivine and orthopyroxene react with liquid to form clinopyroxene, and a discontinuous reaction series, olivine orthopyroxene clinopyroxene is suggested. By fractional crystallization of pyroxenes the liquid will become poorer in SiO₂. Therefore, if liquid formed by partial melting of peridotite in the mantle slowly rises maintaining equilibrium with the surrounding peridotite, the liquid will become poorer in MgO by crystallization of olivine, and tholeiite basalt magma will arrive at the surface. On the other hand, if the liquid undergoes fractional crystallization in the mantle, the liquid may change in composition to alkali-basalt magma and alkali-basalt volcanism may be seen at a late stage of volcanic activity.Publication No. 681, Institute of Geophysics and Planetary Physics, University of California, Los Angeles.     

Multi-segment earthquakes and tsunami potential of the Aleutian megathrust

Large to great earthquakes and related tsunamis generated on the Aleutian megathrust produce major hazards for both the area of rupture and heavily populated coastlines around much of the Pacific Ocean. Here we use paleoseismic records preserved in coastal sediments to investigate whether segment boundaries control the largest ruptures or whether in some seismic cycles segments combine to produce earthquakes greater than any observed since instrumented records began. Virtually the entire megathrust has ruptured since AD1900, with four different segments generating earthquakes >M8.0. The largest was the M9.2 great Alaska earthquake of March 1964 that ruptured ～800 km of the eastern segment of the megathrust. The tsunami generated caused fatalities in Alaska and along the coast as far south as California. East of the 1964 zone of deformation, the Yakutat microplate experienced two >M8.0 earthquakes, separated by a week, in September 1899. For the first time, we present evidence that earthquakes ～900 and ～1500 years ago simultaneously ruptured adjacent segments of the Aleutian megathrust and the Yakutat microplate, with a combined area ～15% greater than 1964, giving an earthquake of greater magnitude and increased tsunamigenic potential.     

Airborne imagery of ocean mixed-layer convective patterns

Airborne infrared and synthetic aperture radar imagery collected over the Gulf Stream are used to examine the surface patterns of small-scale thermal convection and wind-driven Langmuir circulation. These patterns have a thermal contrast of ～0.25 °C, which is roughly an order of magnitude larger than predicted by large-eddy simulations but consistent with the effect on surface temperature of surfactant accumulations induced by mixed-layer eddies.     

Analysis of fault rupture propagation through uniform soil cover

This paper presents results from numerical simulations of the propagation of an active dip–slip fault rupture through a uniform soil layer covering the rigid bedrock. Following verification of the numerical methodology against field evidence, a parametric study is performed for loose and dense sand, for normally consolidated and overconsolidated clay, as well as for different fault dip angles (normal and reverse faults) and for different thicknesses of the soil cover. The soil is modeled as an elasto-plastic, strain-softening material that obeys the Mohr–Coulomb failure criterion. The study aims at establishing criteria for the approximate depiction of the location and the width of the zone with significant ground surface distortion, where the differential ground displacements induced by the fault rupture may threaten the integrity of man-mad structures.     

Consistency grammar for 3D indoor model checking

Indoor 3D models are digital representations of building interiors reconstructed from scanned data acquired by laser scanners, digital depth (RGBD) cameras, and CAD drawings. Consequently, there is noise in the source data and a notable variety in the methods used to treat the noise and to process these data into reconstructed models. Alas, the correctness of these reconstructions and thus their suitability for a given application are uncertain. There is a lack of a robust base logic that would allow for controlling the consistency of these (automatically) generated models. Fortunately, correctness criteria are well‐defined through existing international standards. Hence, we propose a conceptual framework based on formal grammars to check the semantic, geometric, and topological consistency of a reconstructed 3D model. The proposed method proceeds in three steps to validate the model: (1) correctness checking of individual components; (2) consistency verification of instances’ interactions; and (3) model consistency check for targeted applications. Our method identifies the components in the model that violate the given rules derived from the current standards and expert knowledge. Ultimately, we propose a quantified formulation of our method that may be straightforwardly integrated into industrial‐level model checkers. The approach is independent of level of details and reconstruction method.     

A Geoarchaeological Study of the Middle and Upper Pleistocene Levels at Canteen Kopje,Northern Cape Province,South Africa

Canteen Kopje, situated in the Northern Cape Province of South Africa, has two main archaeological deposits: alluvial gravels and a mantle of overlying fine sediments known locally as the “Hutton Sands.” This paper focuses on the fine sediments, the three industries contained within them, and the interface with the underlying gravels in an attempt to clarify their formation and transformation. A Fauresmith assemblage is found at this interface; it is thus crucial to understand the processes of deposition and modification at this poorly understood boundary. The methods used in this study involved the analysis of artifact depositional (dip and orientation) and spatial data, artifact condition, raw materials, and assemblage size profiles. Data presented document the mixing between the lowest levels of the fine sediments and the underlying alluvial gravels. This study thus provides important contextual information for the Fauresmith industry at Canteen Kopje.     

Lower and Middle Ordovician conodonts of Laurentian affinity from blocks of limestone in the Rosroe Formation,South Mayo Trough,western Ireland and their palaeogeographic implication

The Middle Ordovician Rosroe Formation consists of some 1350 m of coarse, mainly siliciclastic to volcaniclastic sedimentary rocks, deposited in a submarine fan environment, and is restricted to the southern limb of the South Mayo Trough, western Ireland. Discrete allochthonous blocks, reaching 5 m in size, are present in the formation at several localities. Conodonts recovered from these blocks, collected from two separate locations, are of late Early and mid Mid Ordovician age. The conodonts have high conodont‐alteration indices (CAI 5) indicative of temperatures as high as 300^o to max. 480 °C; some found in the Lough Nafooey area have abnormally high indices (CAI 6), which correspond to temperatures of about 360^o to max. 550 °C. The oldest fauna is dominated by Periodon aff. aculeatus and characterized by Oepikodus evae typical of the Oepikodus evae Zone (Floian Stage; Stage Slices Fl2–3, Lower Ordovician). The younger conodont assemblage, characterized by Periodon macrodentatus associated with Oistodella pulchra, is referred to the P. macrodentatus conodont Biozone (lower Darriwilian; Stage Slices Dw1–2). The Rosroe conodont assemblages are of Laurentian affinity; comparable faunas are well known from several locations along the east to south‐eastern platform margin of Laurentia and the Notre Dame subzone of central Newfoundland, Canada. The faunal composition from the limestone blocks suggests a shelf edge to slope (or fringing carbonate) setting. The faunal assemblages are coeval with, respectively, the Tourmakeady Formation (Floian–Dapingian) and Srah Formation (Darriwilian) in the Tourmakeady Volcanic Group in the eastern part of the South Mayo Trough and probably are derived from the same or similar laterally equivalent short‐lived carbonate successions that accumulated at offshore ‘peri‐Laurentian’ islands, close to and along the Laurentian margin. During collapse of the carbonate system in the late Mid Ordovician, the blocks were transported down a steep slope and into deep‐water by debris flows, mixing with other rock types now found in the coarse polymict clastics of the Rosroe Formation. The faunas fill the stratigraphical ‘gap’ between the Lower Ordovician Lough Nafooey Volcanic Group and the upper Middle Ordovician Rosroe Formation in the South Mayo Trough and represent a brief interval conducive to carbonate accumulation in an otherwise siliciclastic‐ and volcaniclastic‐dominated sedimentary environment. Copyright © 2015 John Wiley & Sons, Ltd.