Application of array-based waveform cross-correlation techniques to aftershock sequences: the 2003 Lefkada Island,Greece, case

Cross-correlation analysis was applied to events in the 2003 Lefkada Island, Greece, sequence in order to identify clusters of seismicity within the extensive aftershock sequence along a fault zone of approximately 100 km length. Data from the small-aperture TRISAR array, covering the first 2 days of aftershock activity, were used. Array-based waveform correlation has a great advantage over single channel correlation analysis in that the validity of waveform matches with relatively low correlation coefficients can be examined by checking the alignment of correlation traces on the different channels. The length of the fault zone leads inevitably to a great diversity in the waveforms, although a small number of clusters of very similar events emerge from the TRISAR data. Events which the correlation analysis had placed within the same cluster were listed in the ISC Bulletin with separations of up to tens of kilometres. This made it necessary to check the validity of the TRISAR clusters by applying the same procedure independently to the three-component stations of the National Seismographic Network of the National Observatory of Athens, located at local to regional distances from the aftershock area. Results suggest that array-based waveform correlation provides a robust tool both for identifying event clusters within large aftershock areas and for identifying situations in which bulletin event location estimates need re-evaluation.     

Strain analysis and stratigraphic status of Nongkhya,Sumer and Mawmaram conglomerates of Shillong basin,Meghalaya, India

Shillong basin, one of the Purana basins of the Indian peninsula is situated in the central and eastern parts of the Shillong plateau of NE India. Metasedimentary and metavolcanic rocks of the basin are of Mesoproterozoic age and lithostratigraphically belong to Shillong Group (erstwhile Shillong series) comprising Lower Metapelitic Formation (LMF) and Upper Quartzitic Formation (UQF). A long, persistent, faulted and tectonically attenuated conglomerate known as Nongkhya-Sumer-Mawmaram-conglomerate separates these two formations. In the present work, quantitative strain analyses of the pebbles of Sumer, Nongkhya and Mawmaram conglomerates of Ri-Bhoi and West Khasi Hills districts of Meghalaya are carried out using manual and computerized programmes. Eight different techniques for intrapebble, interpebble and bulk rock strain estimation are applied and results are compared systematically. Sumer and Mawmaram conglomerates bear the testimony of broadly flattening type of deformation (0 < k < 1) while Nongkhya conglomerate shows constriction type (1 < k < α). The change in strain ellipsoid shape from Nongkhya to Mawmaram area is accompanied by a change of fabric from S < L to L < S tectonites. Affinity of rotational strain is more in Nongkhya conglomerate as compared to Sumer and Mawmaram conglomerates. The compactness of pebbles is high in case of Nongkhya conglomerate and low to moderate in Sumer and Mawmaram conglomerates indicating high strain in Nongkhya conglomerate (northeastern part of Shillong basin) relative to Sumer and Mawmaram conglomerates (southwestern part of Shillong basin). Thus strain magnitude increases from SW to NE direction of the Shillong basin.     

Magnetotelluric sounding results in eastern Tibetan Plateau

The results of Zayü-Qingshuihe MT sounding profile carried out in eastern Tibetan Plateau are presented in this paper. Using 2-D RRI method, the resistivity distribution with depth is obtained along the profile. It is featured by the resistivity zones in the horizontal direction and layers in the vertical direction. The Bangong-Nujiang suture zone and Jinshajiang suture zone are both important electrical conductivity-separating zones in the plateau, and the former is a zone with relatively low resistivity while the latter is an electrical conductivity gradient zone. The highly electrical conductive bodies in the mid and lower crust of northern Qiangtang and Bayan Har Terrain might be caused by regional melting due to shear heating during the process of subduction in tectonic evolution.     

Nonlinear coupled analysis of a single point mooring system

Coupled effects on a single point mooring(SPM) system subjected to the combined action of wind,waves and current are studied in this paper. Due to the complicatedness of the sea state and the huge size of the vessel,physical experimental study is both time consuming and uneconomical,whereas the numerical study is cost-effective and DNV software provides powerful SESAM software in solving the issues. This paper focuses on the modeling process of the SPM system,catenary equilibrium calculation,static analysis of the vessel in three different scenarios,and dynamic response simulation of the SPM system under environmental excitations. The three scenarios in study are as follows:the SPM is under the combined function of(a) wind,waves and current,(b) wind and waves,(c) current and waves. They are so set that one can compare the contributions of different types of loads in both static and dynamic studies. Numerical study shows that wind and current are the two major factors contributing to the mooring line tension,and surge and sway are the two dominant motions of the moored vessel subjected to environmental excitations.     

Dimorphism in Calceola sandalina (Linneé, 1771)

Based on studying the ontogenetic development of Calceola sandalina in the Early Devonian Yukiang Formation from Guangxi Zhuang Autonomous Region, South China, it is for the first time to issue the evidence indicating the existence of sexual dimorphism in Calceola sandalina. The new discovery will add important data on sexual dimorphism throughout the non-colonial fossil metazoan, and it also may throw lights on studying the taxonomy and phylogeny of Calceola sandalina and its relevant taxa.     

How to assess hydromorphology? A comparison of Ukrainian and German approaches

Recently, the Ukrainian Western Bug water authorities developed a national field survey to assess the quality of river habitats. The Ukrainian government already cooperates with EU member states along transboundary rivers and also orientates itself towards the European Water Framework Directive (WFD). As a future application for EU membership is feasible, the water authorities started to implement WFD criteria into their national survey schemes including the assessment of rivers’ hydromorphology. This article compares two different hydromorphological survey methods to identify similarities and differences of the classification approaches with regard to the conformity of obtained outputs with the WFD demands. The field surveys, the Ukrainian (UA-FS) and the German (LAWA-FS), were applied in parallel on 14 river sections along the Western Bug River and parts of its tributaries. Results show a wide range of conformity, but also several differences between and gaps within all methods. The UA-FS generally lacks the idea of reference condition in rivers’ hydromorphology and the definition of different stream types or near-natural land uses. The UA-FS and the LAWA-FS approaches are similar with respect to their incorporated compartments and most main parameters, but differ in definition and interpretation of specific functional units and single parameters. Greatest similarities down to single parameters exist in aspects of land use, bank vegetation, currents diversity, and within-stream variation of water depths. Differences include the assessment and interpretation of lateral erosion, sinuosity, type and depth of profile, substrate diversity, as well as special structures of bank and riverbed. Overall, the LAWA-FS is more conservative in its rating than the UA-FS. Still, UA-FS can be regarded as an important improvement for a systematic and reliable monitoring of river hydromorphology in the Ukraine that will help to successfully engage with both the integrated water resources management and the WFD harmonisation process in the future.     

Glaciomarine sedimentation and bottom current activity on the north-western and northern continental margins of Svalbard during the late Quaternary

Palaeo-bottom current strength of the West Spitsbergen Current (WSC) and the influence of the Svalbard-Barents Sea Ice Sheet (SBIS) on the depositional environment along the northern Svalbard margins are poorly known. Two gravity cores from the southern Yermak Plateau and the upper slope north of Nordaustlandet, covering marine isotope stage (MIS) 1 to MIS 5, are investigated. Five lithofacies, based on grain size distribution, silt/clay ratio, content and mean of sortable silt (SS), are distinguished to characterise the contourite-dominated sedimentary environments. In addition, depositional environments are described using total organic carbon (TOC), total sulphur (TS) and calcium carbonate (CaCO₃) contents of sediments. Facies A, containing coarse SS, suggests strong bottom current activity and good bottom water ventilation conditions as inferred from low TOC content. This facies was deposited during the glacial periods MIS 4, MIS 2 and during the late Holocene. Facies B is dominated by fine SS indicating weak bottom current and poor ventilation (cf. high TOC content of 1.2–1.6%), and correlates with the MIS 4/3 and MIS 2/1 transition periods. With an equal amount of clay and sand, fine SS and high content of TOC, facies C indicates reduced bottom current strength for intervals with sediment supply from proximal sources such as icebergs, sea ice or meltwater discharge. This facies was deposited during the last glacial maximum. Facies D represents mass-flow deposits on the northern Svalbard margin attributed to the SBIS advance at or near the shelf edge. Facies E sediments indicating moderate bottom current strength were deposited during MIS 5 and MIS 3, and during parts of MIS 2. This first late Quaternary proxy record of the WSC flow and sedimentation history from the northern Svalbard margin suggests that the oceanographic conditions and ice sheet processes have exerted first-order control on sediment properties.     

Late Pleistocene to Holocene sedimentation and hydrocarbon seeps on the continental shelf of a steep,tectonically active margin,southern California,USA

Small, steep, uplifting coastal watersheds are prolific sediment producers that contribute significantly to the global marine sediment budget. This study illustrates how sedimentation evolves in one such system where the continental shelf is largely sediment-starved, with most terrestrial sediment bypassing the shelf in favor of deposition in deeper basins. The Santa Barbara–Ventura coast of southern California, USA, is considered a classic area for the study of active tectonics and of Tertiary and Quaternary climatic evolution, interpretations of which depend upon an understanding of sedimentation patterns. High-resolution seismic-reflection data over >570 km² of this shelf show that sediment production is concentrated in a few drainage basins, with the Ventura and Santa Clara River deltas containing most of the upper Pleistocene to Holocene sediment on the shelf. Away from those deltas, the major factor controlling shelf sedimentation is the interaction of wave energy with coastline geometry. Depocenters containing sediment 5–20 m thick exist opposite broad coastal embayments, whereas relict material (bedrock below a regional unconformity) is exposed at the sea floor in areas of the shelf opposite coastal headlands. Locally, natural hydrocarbon seeps interact with sediment deposition either to produce elevated tar-and-sediment mounds or as gas plumes that hinder sediment settling. As much as 80% of fluvial sediment delivered by the Ventura and Santa Clara Rivers is transported off the shelf (some into the Santa Barbara Basin and some into the Santa Monica Basin via Hueneme Canyon), leaving a shelf with relatively little recent sediment accumulation. Understanding factors that control large-scale sediment dispersal along a rapidly uplifting coast that produces substantial quantities of sediment has implications for interpreting the ancient stratigraphic record of active and transform continental margins, and for inferring the distribution of hydrocarbon resources in relict shelf deposits.     

The light transmission and seiche depth of Izmir Bay,western Turkey

Izmir Bay is one of the most polluted estuaries in the whole Mediterranean Sea. The inner part of the Bay (Inner Bay) is heavily affected by domestic and industrial discharge. As a result of these loads, strong eutrophication occurs in the Inner Bay, which is temporally anaerobic. The ecologically sensitive approach of the local authorities during the last decade has given rise to a wide variety of monitoring and research studies on this bay. On the other hand, the municipality of Izmir started to operate wastewater treatment facilities since January 2000. The Institute of Marine Sciences and Technology — Izmir (IMST) with its research vessel R/V K Piri Reis has been conducting an intensive monitoring program since 1988 and especially during the recent few years. These investigations provide an opportunity for the evaluation of the performance of the wastewater treatment plant in terms of the change in the optical properties of Izmir Bay water in a positive manner. The turbidity values measured in these monitoring studies indicate that the values have changed drastically after January 2000. Their spatial variation indicates that the values decrease from the Inner Bay towards the Aegean Sea. The turbidity (light transmission) values are measured with an automatic CTD (conductivity, temperature and depth) system during each cruise. The seiche disc depth measurement is carried out only occasionally. The accuracy of the seiche disc depth is dependent on certain daylight conditions and depends on the operator. The seiche disc depth (D _s) is an important parameter to estimate primary production of organic matter (hereafter called production). A relation between light transmission (turbidity) value and seiche disc depth (D _s) is found with very good agreement. The correlations are very high (approximately 0.94) with slight seasonal variation.     

Flash-flood potential assessment and mapping by integrating the weights-of-evidence and frequency ratio statistical methods in GIS environment – case study: Bâsca Chiojdului River catchment (Romania)

Given the significant worldwide human and economic losses caused due to floods annually, reducing the negative consequences of these hazards is a major concern in development strategies at different spatial scales. A basic step in flood risk management is identifying areas susceptible to flood occurrences. This paper proposes a methodology allowing the identification of areas with high potential of accelerated surface run-off and consequently, of flash-flood occurrences. The methodology involves assessment and mapping in GIS environment of flash flood potential index (FFPI), by integrating two statistical methods: frequency ratio and weights-of-evidence. The methodology was applied for Bâsca Chiojdului River catchment (340 \(\hbox {km}^{2}\)), located in the Carpathians Curvature region (Romania). Firstly, the areas with torrential phenomena were identified and the main factors controlling the surface run-off were selected (in this study nine geographical factors were considered). Based on the features of the considered factors, many classes were set for each of them. In the next step, the weights of each class/category of the considered factors were determined, by identifying their spatial relationships with the presence or absence of torrential phenomena. Finally, the weights for each class/category of geographical factors were summarized in GIS, resulting the FFPI values for each of the two statistical methods. These values were divided into five classes of intensity and were mapped. The final results were used to estimate the flash-flood potential and also to identify the most susceptible areas to this phenomenon. Thus, the high and very high values of FFPI characterize more than one-third of the study catchment. The result validation was performed by (i) quantifying the rate of the number of pixels corresponding to the torrential phenomena considered for the study (training area) and for the results’ testing (validating area) and (ii) plotting the ROC (receiver operating characteristics) curve.