应用AMSR-E 89GHz遥感数据反演北极多年冰密集度

被动微波辐射计AMSR-E在89GHz频段的空间分辨率几乎是其它低频段的2倍。到目前为止,已经有成熟的算法采用AMSR-E 89GHz频段的数据来反演整体海冰的密集度,而本文根据89GHz频段亮温数据针对一年冰、多年冰以及无冰水面的不同特性,提出了一种反演多年冰密集度的方法(AC)。计算了2007年北极的整体海冰和多年冰密集度,并与NASA TEAM算法(NT)的结果作了比较。对于整体海冰密集度,两种算法反演的结果基本一致。从日平均上来看,AC算法得到的整体海冰覆盖面积只比NT算法多25万km2。但是对于多年冰的反演结果,AC算法得到的结果比NT的结果要多出146万km2,冬季差别尤其大。造成这种差别的原因可能是AC算法对于北极表面气温的变化比较敏感。另外,AC算法计算得到2007年最大海冰覆盖面积为1400万km2,最小海冰覆盖面积为400万km2,这与其它研究结果一致。     

Acoustic Emissions Monitoring during Inelastic Deformation of Porous Sandstone: Comparison of Three Modes of Deformation

In some reservoirs, large deformations can occur during oil or gas production because of the effective stress change. For very porous rocks, these production operations can be sufficient to cause inelastic deformation and irreversible damage. Rock formations can undergo deformation by different mechanisms, including dilatancy or pore collapse. In the laboratory, it has been shown that the inelastic deformation and failure mode of porous rocks are pressure sensitive. Indeed, when subjected to an overall compressive loading, a porous rock may fail by shear localization, compaction localization, or by cataclastic compaction. Acoustic emission (AE) records provide important information to understand the failure mode of rocks: the spatial evolution of damage as well as the source mechanisms can be followed using this technique. In this paper, we present three different laboratory axisymmetric compression experiments, performed on Bleurswiller sandstone, which enable us to compare the acoustic emission signature of these three modes of deformation. Our data show that compaction localization and cataclastic compaction are characterized by similar acoustic signatures (in terms of AE sources characteristics and evolution of AE number), in comparison to the acoustic signature from shear localization. This implies similar micromechanisms involved during compaction bands formation and cataclastic compaction.     

Spatial Distribution of Incrustations around a Water Well after 38 Years of Use

The spatial distribution of iron incrustations around an abandoned water well after 38 years of use was studied by analyzing the iron content of soil samples from 12 core borings. Three of these were performed inside the gravel pack, the rest at different distances in the adjacent aquifer. Incrustations had preferentially accumulated at the bottom of the screen coinciding with a zone of higher aquifer permeability. As expected, all cores from the annulus show buildup of iron oxides but the ones outside also showed elevated iron content up to 4 m away from the screen. Such distant incrustations are very difficult to remove, by mechanical or chemical methods. The common procedure of removing tubing and annulus material to install a new well at the same location could therefore give the replacement well a hydraulic disadvantage as the incrustations in the aquifer remain in place.     

Analysis of Wellbore Skin Samples—Typology,Composition, and Hydraulic Properties

The presence of a wellbore skin layer, formed during the drilling process, is a major impediment for the energy‐efficient use of water wells. Many models exist that predict its potential impacts on well hydraulics, but so far its relevant hydraulic parameters were only estimates or, at best, model results. Here, we present data on the typology, thickness, composition, and hydraulic properties obtained from the sampling of excavated dewatering wells in lignite surface mines and from inclined core drilling into the annulus of an abandoned water well. Despite the limited number of samples, several types of skin were identified. Both surface cake filtration and particle straining in the aquifer occur. The presence of microcracks may be a determining feature for the hydraulic conductivity of skin layers. In the case of the well‐developed water supply well, no skin layer was detected. The observed types and properties of wellbore skin samples can be used to test the many mathematical skin models.     

New spatial dimensions of global cityscapes: From reviewing existing concepts to a conceptual spatial approach

Current global urbanisation processes are leading to new forms of massive urban constellations. The conceptualisations and classifications of these, however, are often ambiguous, overlap or lag behind in scientific literature. This article examines whether there is a common denominator to define and delimitate–and ultimately map–these new dimensions of cityscapes. In an extensive literature review we analysed and juxtaposed some of the most common concepts such as megacity, megaregion or megalopolis. We observed that many concepts are abstract or unspecific, and for those concepts for which physical parameters exist, the parameters are neither properly defined nor used in standardised ways. While understandably concepts originate from various disciplines, the authors identify a need for more precise definition and use of parameters. We conclude that often, spatial patterns of large urban areas resemble each other considerably but the definitions vary so widely that these differences may surpass any inconsistencies in the spatial delimitation process. In other words, today we have tools such as earth observation data and Geographic Information Systems to parameterise if clear definitions are provided. This appears not to be the case. The limiting factor when delineating large urban areas seems to be a commonly agreed ontology.     

Microseismicity induced during fluid-injection: A case study from the geothermal site at Groß Schönebeck,North German Basin

The technical feasibility of geothermal power production in a low enthalpy environment will be investigated in the geothermal site at Groß Schönebeck, North German Basin, where a borehole doublet was completed in 2007. In order to complete the Enhanced Geothermal System, three massive hydraulic stimulations were performed. A seismic network was deployed including a single 3-component downhole seismic sensor at only 500 m distance to the injection point. Injection rates reached up to 9 m³/min and the maximum injection well-head pressure was as high as ～60 MPa. A total of 80 very small (?1.8 < M _W < ?1.0) induced seismic events were detected. The hypocenters were determined for 29 events. The events show a strong spatial and temporal clustering and a maximum seismicity rate of 22 events per day. Spectral parameters were estimated from the downhole seismometer and related to those from other types of induced seismicity. The majority of events occurred towards the end of stimulation phases indicating a similar behavior as observed at similar treatments in crystalline environments but in our case at a smaller level of seismic activity and at lower magnitudes.     

Author Index Volume 56

Authors Index

Author Index Volume 56     

Existence and stability of strong potential double layers

An elementary integral equation technique is used to construct strong and weak stationary shock solutions from the one-dimensional Vlasov equation. It is shown that the plasma is Penrose stable in all points in space under certain conditions.This work was supported in part by the Atomic Energy Commission Grant No. AT(11-1)-2059, and NSF Grant GA-31676.supported by a CSIR bursary.     

Electrical Properties of Crustal and Mantle Rocks – A Review of Laboratory Measurements and their Explanation

The electrical properties of rocks and minerals are controlled by thermodynamic parameters like pressure and temperature and by the chemistry of the medium in which the charge carriers move. Four different charge transport processes can be distinguished. Electrolytic conduction in fluid saturated porous rocks depends on petrophysical properties, such as porosity, permeability and connectivity of the pore system, and on chemical parameters of the pore fluid like ion species, its concentration in the pore fluid and temperature. Additionally, electrochemical interactions between water dipoles or ions and the negatively charged mineral surface must be considered. In special geological settings electronic conduction can increase rock conductivities by several orders of magnitude if the highly conducting phases (graphite or ores) form an interconnected network. Electronic and electrolytic conduction depend moderately on pressure and temperature changes, while semiconduction in mineral phases forming the Earth’s mantle strongly depends on temperature and responds less significantly to pressure changes. Olivine exhibits thermally induced semiconduction under upper mantle conditions; if pressure and temperature exceed ~ 14 GPa and 1400 °C, the phase transition olivine into spinel will further enhance the conductivity due to structural changes from orthorhombic into cubic symmetry. The thermodynamic parameters (temperature, pressure) and oxygen fugacity control the formation, number and mobility of charge carriers. The conductivity temperature relation follows an Arrhenius behaviour, while oxygen fugacity controls the oxidation state of iron and thus the number of electrons acting as additional charge carriers. In volcanic areas rock conductivities may be enhanced by the formation of partial melts under the restriction that the molten phase is interconnected. These four charge transport mechanisms must be considered for the interpretation of geophysical field and borehole data. Laboratory data provide a reproducible and reliable database of electrical properties of homogenous mineral phases and heterogenous rock samples. The outcome of geoelectric models can thus be enhanced significantly. This review focuses on a compilation of fairly new advances in experimental laboratory work together with their explanation.