Soil organic carbon storage and soil CO<Subscript>2</Subscript> flux in the alpine meadow ecosystem

High-resolution sampling, measurements of organic carbon contents and ¹⁴C signatures of selected four soil profiles in the Haibei Station situated on the northeast Tibetan Plateau, and application of ¹⁴C tracing technology were conducted in an attempt to investigate the turnover times of soil organic carbon and the soil-CO₂ flux in the alpine meadow ecosystem. The results show that the organic carbon stored in the soils varies from 22.12×10⁴ kg C hm⁻² to 30.75×10⁴ kg C hm⁻² in the alpine meadow ecosystems, with an average of 26.86×10⁴ kg C hm⁻². Turnover times of organic carbon pools increase with depth from 45 a to 73 a in the surface soil horizon to hundreds of years or millennia or even longer at the deep soil horizons in the alpine meadow ecosystems. The soil-CO₂ flux ranges from 103.24 g C m⁻² a⁻¹ to 254.93 gC m⁻² a⁻¹, with an average of 191.23 g C m⁻² a⁻¹. The CO₂ efflux produced from microbial decomposition of organic matter varies from 73.3 g C m⁻² a⁻¹ to 181 g C m⁻² a⁻¹. More than 30% of total soil organic carbon resides in the active carbon pool and 72.8%281.23% of total CO₂ emitted from organic matter decomposition results from the topsoil horizon (from 0 cm to 10 cm) for the Kobresia meadow. Responding to global warming, the storage, volume of flow and fate of the soil organic carbon in the alpine meadow ecosystem of the Tibetan Plateau will be changed, which needs further research. Supported by the National Natural Science Foundation of China (Grant Nos. 40231015, 40471120 and 40473002) and the Guangdong Provincial Natural Science Foundation of China (Grant No. 06300102)     

大兴安岭地区古生代构造格架重建:来自俯冲增生杂岩研究进展

大兴安岭地区古生代处于古亚洲洋闭合阶段,其间发育众多的弧盆系和蛇绿岩带,笔者等在大兴安岭地区1: 1 000 000地质编图和野外地质调研基础上,应用“洋板块地质”学术思想在大兴安岭地区元古宙、古生代地质体中划分出一系列“俯冲增生杂岩”、地块基底残块、岛弧、弧前盆地、弧后盆地等构造单元,结合陆(地)块和岩浆弧、弧前盆地、弧后盆地和“俯冲增生杂岩”的时空展布,划分出9条俯冲增生杂岩带,其中新识别出3条俯冲增生杂岩带。俯冲增生杂岩带主要分布于兴蒙造山带内部各地块之间和地块与大型岛弧带之间,相当于地块间及地块与岛弧带间的缝合带。依据俯冲增生杂岩带两侧对应的陆(地)块、岛弧带等构造级别,归并出5条结合带。俯冲增生杂岩带的展布方向以北东向为主,时代自北向南依次变新,从早奥陶世演化到中—晚二叠世,暗示古亚洲洋洋盆向大兴安岭地区陆(地)块俯冲作用最早发生在北部额尔古纳一带,逐渐向南后撤,不断形成新的洋壳和产生俯冲增生作用,相应的活动陆缘从北部额尔古纳地块向南逐渐增生,配套弧盆系时代也逐渐向南变新。早—中三叠世至西拉木伦一带发生陆-陆拼贴,完成华北板块与西伯利亚板块的对接。通过对大兴安岭地区古生代“俯冲增生杂岩”的研究,重建了大兴安岭地区古生代构造格架,提高了古亚洲洋东段洋-陆转换的研究程度。     

Mineralization of pegmatites in parts of the Oban Massif, Southeastern Nigeria： A preliminary analysis

The Oban Basement Massif of southeastern Nigeria is composed of metamorphosed rocks including phyllites, schists, gneisses and amphibolites cut by pegmatitic dykes of varying length and thickness, which intruded the metamorphic rocks. Preliminary geochemical study and analysis of these pegmatites from western Oban Massif at Uyanga, Akwa Ibami, Iwuru I, Iwuru Ⅱ and Igbofia showed that the pegmatites are highly albitized. This is incon-sistent with earlier postulations that the pegmatites in this part of Nige...     

Review on physical models of lunar brightness temperature

Brightness temperature is a main index to reflect the energy of microwave radiation of an object. Using lunar brightness temperature data, physical properties of lunar regolith, such as thickness, heat flow and dielectric permittivity, could be interpreted. There are two methods to study brightness temperature distribution of the moon: the first is used to measure lunar brightness temperature by radio observation or spaceborne microwave radiometers, and the second is used to simulate calculation by the physical model. On the basis of the measurements of lunar brightness temperature in the history, this study analyzed the main physical model of lunar brightness temperature, also including its theory and influence factors. The authors concluded that surface and subsurface temperatures of the moon, dielectric properties and layered structure of lunar regolith were the main factors affecting the global brightness temperature of the moon. These factors should be quantified in detail in the future research.     

Structures and characteristics of the windy atmospheric boundary layer in the South China Sea region during cold surges

An observational analysis of the structures and characteristics of a windy atmospheric boundary layer during a cold air outbreak in the South China Sea region is reported in this paper. It is found that the main structures and characteristics are the same as during strong wind episodes with cold air outbreaks on land. The high frequency turbulent fluctuations(period<1 min) are nearly random and isotropic with weak coherency, but the gusty wind disturbances(1 min相似文献   

Retrieval of the Change of Precipitable Water Vapor by GPS Technique

The feasibility of GPS precipitable water vapor (PWV) is discussed based on the comparison of Radiosonde and GPS PWV where the correlation coefficient is 0.94 and the RMS is 4.0 mm. PWV change in the C...     

Linear Elastic and Cohesive Fracture Analysis to Model Hydraulic Fracture in Brittle and Ductile Rocks

Hydraulic fracturing technology is being widely used within the oil and gas industry for both waste injection and unconventional gas production wells. It is essential to predict the behavior of hydraulic fractures accurately based on understanding the fundamental mechanism(s). The prevailing approach for hydraulic fracture modeling continues to rely on computational methods based on Linear Elastic Fracture Mechanics (LEFM). Generally, these methods give reasonable predictions for hard rock hydraulic fracture processes, but still have inherent limitations, especially when fluid injection is performed in soft rock/sand or other non-conventional formations. These methods typically give very conservative predictions on fracture geometry and inaccurate estimation of required fracture pressure. One of the reasons the LEFM-based methods fail to give accurate predictions for these materials is that the fracture process zone ahead of the crack tip and softening effect should not be neglected in ductile rock fracture analysis. A 3D pore pressure cohesive zone model has been developed and applied to predict hydraulic fracturing under fluid injection. The cohesive zone method is a numerical tool developed to model crack initiation and growth in quasi-brittle materials considering the material softening effect. The pore pressure cohesive zone model has been applied to investigate the hydraulic fracture with different rock properties. The hydraulic fracture predictions of a three-layer water injection case have been compared using the pore pressure cohesive zone model with revised parameters, LEFM-based pseudo 3D model, a Perkins-Kern–Nordgren (PKN) model, and an analytical solution. Based on the size of the fracture process zone and its effect on crack extension in ductile rock, the fundamental mechanical difference of LEFM and cohesive fracture mechanics-based methods is discussed. An effective fracture toughness method has been proposed to consider the fracture process zone effect on the ductile rock fracture.     

四川峨边县玄武岩矿综合开发利用探讨

大量研究证明,玄武岩附加价值极高,只进行简单的破碎用作路基的垫石或混凝土骨料,则会造成矿产资源价值大打折扣,因此需寻求更科学的矿产资源综合利用方案（张凯军等,2021）。采取野外露头调查、钻探工程及采样测试分析等手段,在四川峨边地区发现了峨眉山玄武岩组（P2e）上部的致密块状玄武岩符合拉丝玄武岩原料要求,其矿石组构、化学成分范围和酸度系数及黏度系数等评价指标符合部分企业纤维用玄武岩的工业指标要求。     

综合物探方法在地质灾害调查中的应用研究

介绍了在地质灾害调查中常用的几种物探方法的适用条件和应用范围,并通过实例展示了各种方法的应用效果.结果表明浅层物探方法应用效果显著,在地质灾害调查中具有较好的应用前景.