改进的能量守恒方法及其在CHAMP重力场恢复中的应用

An efficient method for gravity field determination from CHAMP orbits and accelerometer data is referred to as the energy balance approach. A new CHAMP gravity field recovery strategy based on the improved energy balance approach IS developed in this paper. The method simultaneously solves the spherical harmonic coefficients, daily Integration constant, scale and bias parameters. Two 60 degree and order gravitational potential models, XISM-CHAMPO1S from the classical energy balance approach, and XISM-CHAMPO2S from the improved energy balance, are determined using about one year＇s worth of CHAMP kinematic orbits from TUM and accelerometer data from GFZ. Comparisons among XISM-CHAMPO1S, XISM-CHAMPO2S, EIGEN-CGO3C, EIGEN-CHAMPO3S, EIGEN2, ENIGNIS and EGM96 are made. The results show that the XISM-CHAMPO2S model is more accurate than EGM96, EIGENIS, EIGEN2 and XISM-CHAMPO1S at the same degree and order, and has almost the same accuracy as EIGEN-CHAMPO3S.     

2018年安徽无为ML4.1地震地下流体前兆异常特征

对2018年4月6日无为ML4.1地震前的地下流体前兆异常特征以及该地震的震源机制解进行了分析,结果表明,无为地震前的异常分布在距震中64～233 km范围内,这些异常在时间进程上,可分为中期趋势背景异常和短临异常,主要以中期趋势背景异常为主.这些中期趋势背景异常均表现为水位的破年变变化.从空间演化上看,2018年安徽...     

Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).     

The effect of annealing on the luminescence decay-time of synthetic calcite:Mn

Calcite was synthesized by four methods, and the luminescence decay-time was measured for nine samples before and after heating hydrothermally in the temperature range 200–400°C. Decay-time data were collected between room temperature and approximately 15 K. The decay time at room temperature is approximately 50 ms, with little difference between a given calcite before and after hydrothermal treatment. The decay time at 15 K is always greater than at room temperature as the effect of thermal quenching diminishes. Differences in decay time before and after heating are more apparent at low temperature owing to this reduction in thermal quenching. The decay time decreased significantly in two samples, and an increase in decay time was observed in the remaining seven samples following heating. Among the latter group, the change in decay time was insignificant in three samples. The results are compared with previous data in which it was shown that the effect of heating is to increase the intensity of luminescence.     

Citizens as sensors: the world of volunteered geography

In recent months there has been an explosion of interest in using the Web to create, assemble, and disseminate geographic information provided voluntarily by individuals. Sites such as Wikimapia and OpenStreetMap are empowering citizens to create a global patchwork of geographic information, while Google Earth and other virtual globes are encouraging volunteers to develop interesting applications using their own data. I review this phenomenon, and examine associated issues: what drives people to do this, how accurate are the results, will they threaten individual privacy, and how can they augment more conventional sources? I compare this new phenomenon to more traditional citizen science and the role of the amateur in geographic observation.     

空间软数据及其插值方法研究进展

由于对地观测技术的迅速发展,空间数据的种类和数量增长迅猛,由空间数据反演得到的各种信息日趋膨胀,这些反演结果中的信息不少以软数据的形式出现。在实际应用中,这些软数据往往与空间插值的目标变量具有一定的相关性,甚至成为控制目标变量空间分布特征的重要因素。然而,由于这些数据通常表示为非数值形式,在计算和处理上存在着一定困难,以致被传统的插值方法所忽视,从而造成信息浪费。近来出现的空间软插值方法是一种利用空间软数据作为辅助信息并以改善插值效果的方法,能够较好的处理并利用软数据所隐含的信息,具有较好的应用发展前景。本文根据空间软数据的特点及其分类,系统综述了空间软插值方法及其应用领域。首先分析了空间数据软硬性质的根本区别,论述了软数据的分类和“硬化”方法,然后介绍空间插值模型中对空间软数据的集成方法和原理,最后对空间软插值方法及其应用研究领域进行了展望。     

南边界强迫的非线性临界层与副高的形成、维持和振荡

用非线性准地转正压涡度方程模式，在南边界取定常强迫波，采用４种方案模拟了非线性临界层及其上激发的Ｋｅｌｖｉｎ猫眼，以确定热带的定常强迫对副高的形成、维持和振荡的影响。结果表明，南边界定常强迫仍在非线性临界层内激发行星尺度的准定常反气旋的Ｋｅｌｖｉｎ猫眼流场，猫眼的移动、强度和形状变化与夏季副高比较相似．而北边界定常强迫所得结果与夏季副高差异较大。因此，南边界所激发的非线性临界层上的Ｋｅｌｖｉｎ猫眼可能是夏季副高形成、维持和振荡的一种更为重要的新物理机制。文中还提出准定常行星波穿越副热带的非线性临界层的物理机制。     

一种顾及电子元件延迟的超宽带室内定位方法

针对超宽带定位系统中存在多种误差影响定位精度的问题,本文全面分析了超宽带室内定位的误差源,给出了超宽带室内定位基本函数模型,提出了将电子元件延迟这一系统差与三维坐标同时作为参数进行估计,并通过高斯-牛顿迭代算法得到定位结果的方法。试验结果表明,该方法能有效消除位置系统偏差,两组静态试验均以全站仪测量结果作为真值,点位误差分别为4.1、2.3 cm,相较于已有方法分别提高了64%和87%,而动态试验结果更接近于参考轨迹,最大误差小于10 cm。     

Chemical composition of rock-forming minerals and crystallization physicochemical conditions of the Middle Eocene I-type Haji Abad pluton,SW Buin-Zahra,Iran

The Haji Abad intrusion is a well-exposed Middle Eocene I-type granodioritc pluton in the Urumieh–Dokhtar magmatic assemblage (UDMA). The major constituents of the investigated rocks are K-feldspar, quartz, plagioclase, pyroxene, and minor Fe–Ti oxide and hornblende. The plagioclase compositions fall in the labradorite, andesine, and oligoclase fields. The amphiboles range in composition from magnesio-hornblende to tremolite–hornblende of the calcic-amphibole group. Most pyroxenes principally plot in the field of diopside. The calculated average pressure of emplacement is 1.9 kbar for the granodioritic rocks, crystallizing at depths of about 6.7 km. The highest pressure estimated from clinopyroxene geobarometry (5 kbar) reflects initial pyroxene crystallization pressure, indicating initial crystallization depth (17.5 km) in the Haji Abad granodiorite. The estimated temperatures using two-feldspar thermometry give an average 724 °C. The calculated average temperature for clinopyroxene crystallization is 1090 °C. The pyroxene temperatures are higher than the estimated temperature by feldspar thermometry, indicating that the pyroxene and feldspar temperatures represent the first and late stages of magmatic crystallization of Haji Abad granodiorite, respectively. Most pyroxenes plot above the line of Fe³⁺?=?0, indicating they crystallized under relatively high oxygen fugacity or oxidized conditions. Furthermore, the results show that the Middle Eocene granitoids crystallized from magmas with H₂O content about 3.2 wt%. The relatively high water content is consistent with the generation environment of HAG rocks in an active continental margin and has allowed the magma to reach shallower crustal levels. The MMEs with ellipsoidal and spherical shapes show igneous microgranular textures and chilled margins, probably indicating the presence of magma mixing. Besides, core to rim compositional oscillations (An and FeO) for the plagioclase crystals serve as robust evidence to support magma mixing. The studied amphiboles and pyroxenes are grouped in the subalkaline fields that are consistent with crystallization from I-type calc-alkaine magma in the subduction environment related to active continental margin. Mineral chemistry data indicate that Haji Abad granodiorites were generated in an orogenic belt related to the volcanic arc setting consistent with the subduction of Neo-Tethyan oceanic crust beneath the central Iranian microcontinent.     

A Comparison of Nd Isotopes of Granitoids from the Central Asian Orogenic Belt and Qinling-Dabie Orogen,and Implications for Understanding of Crustal Growth from Accretion to Collision

正Orogens can generally be divided into two types:accretionary and collisional.The fundamental differences in deep-crustal compositions and architecture from accretion to collision and how to identify them is not well understood.This is one of the major aims of the IGCP 662 project (www.igcp662.org.cn).The Central Asian Orogenic Belt (CAOB) is a typical and the world's largest Phanerozoic accretionary orogenic belt and the