SciMeasure Wavefront Sensor Cameras and their Application in the Palomar Adaptive Optics System

SciMeasure, in collaboration with Emory University and the Jet Propulsion Laboratory, has developed a very versatile CCD controller for use in adaptive optics, optical interferometry, and other applications requiring high-speed readout rates and/or low read noise. The overall architecture of this controller system will be discussed and its performance using both EEV CCD39 and MIT/LL CCID-19 detectors will be presented. This controller is used in the adaptive optics system, developed by JPL, for the 200′′ Hale telescope at Palomar Mountain. Early diffraction-limited science results, recently achieved by the AO system, are presented. We gratefully acknowledge the financial support of NASA through SBIR contracts NAS8–97195 and NAS8–98081.     

High-resolution precipitation and temperature downscaling for glacier models

The spatial resolution gap between global or regional climate models and the requirements for local impact studies motivates the need for climate downscaling. For impact studies that involve glacier modelling, the sparsity or complete absence of climate monitoring activities within the regions of interest presents a substantial additional challenge. Downscaling methods for this application must be independent of climate observations and cannot rely on tuning to station data. We present new, computationally-efficient methods for downscaling precipitation and temperature to the high spatial resolutions required to force mountain glacier models. Our precipitation downscaling is based on an existing linear theory for orographic precipitation, which we modify for large study regions by including moist air tracking. Temperature is downscaled using an interpolation scheme that reconstructs the vertical temperature structure to estimate surface temperatures from upper air data. Both methods are able to produce output on km to sub-km spatial resolution, yet do not require tuning to station measurements. By comparing our downscaled precipitation (1 km resolution) and temperature (200 m resolution) fields to station measurements in southern British Columbia, we evaluate their performance regionally and through the annual cycle. Precipitation is improved by as much as 30% (median relative error) over the input reanalysis data and temperature is reconstructed with a mean bias of 0.5°C at locations with high vertical relief. Both methods perform best in mountainous terrain, where glaciers tend to be concentrated.     

A one‐dimensional model for simulating armouring and erosion on hillslopes: 2. Long term erosion and armouring predictions for two contrasting mine spoils

This paper investigates the dynamics of soil armouring as a result of fluvial erosion for a non‐cohesive sandy gravel spoil from the Ranger Mine, Australia, and a cohesive silt loam spoil from the Northparkes Mine, Australia, using a model for hillslope soil armouring. These long term predictions concentrate on the temporal and spatial changes of the spoil grading and erosion over 100–200 years for the flat cap regions (1–2%) and steep batter edges (10–30%) typically encountered on waste rock dumps. The existence of a significant rock fragment fraction in the Ranger spoil means that it armours readily, while Northparkes does not. For Ranger the waste rock showed reductions in (1) cumulative erosion of up to 81% from that obtained by extrapolating the initial erosion rate out 100 years and (2) the erosion/year by more than 10‐fold. For Northparkes reductions were less marked, with the maximum reduction in erosion/year being 37% after 200 years. For Ranger the reductions were greatest and fastest for intermediate gradient hillslopes. For the steepest hillslopes the armouring decreased because the flow shear stresses were large enough to mobilize all material in the armour layer. Model uncertainty was assessed with probabilistic confidence limits demonstrating that these erodibility reductions were statistically significant. A commonly used hillslope erosion model (sediment flux = β₁ discharge m₁ slope n₁) was fitted to these predictions. The erodibility, β₁, and m₁ decreased with time, which was consistent with our physical intuition about armouring. At Ranger the parameter m₁ asymptoted to 1·5–1·6 while at Northparkes it asymptoted to 1·2–1·3. At Ranger transient spatial trends in armouring led to a short term (50–200 years in the future) reduction in n₁, to below zero under certain circumstances, recovering to an asymptote of about 0·5–1. At Northparkes n₁ asymptoted to about 0·6, with no negative transients predicted. The m₁ and n₁ parameters predicted for Ranger were shown to be consistent with field data from a 10‐year‐old armoured hillslope and consistent with published relationships between erodibility and rock content for natural hillslopes. Copyright © 2007 John Wiley & Sons, Ltd.     

Geomorphological evolution and sediment stratigraphy of numerically simulated alluvial fans

When a sediment laden river reaches a flat basin area the coarse fraction of their sediment load is deposited in a cone shaped structure called an alluvial fan. In this article we used the State Space Soil Production and Assessment Model (SSSPAM) coupled landform–soilscape evolution model to simulate the development of alluvial fans in two- and three-dimensional landforms. In SSSPAM the physical processes of erosion and armouring, soil weathering and sediment deposition were modelled using state-space matrices, in both two and three dimensions. The results of the two-dimensional fan showed that the fan grew vertically and laterally keeping a concave up long profile. It also showed a downstream fining of the sediments along the fan profile. Both of these observations are in agreement with available literature concerning natural and experimental fan formations. Simulations with the three-dimensional landform produced a fan with a semicircular shape with concave up long profiles and concave down cross profiles which is typical for fans found in nature and ones developed in laboratory conditions. During the simulation the main channel which brings sediment to the fan structure changed its position constantly leading to the semicircular shape of the fan. This behaviour is similar to the autogenic process of ‘fanhead trenching’ which is the major mechanism of sediment redistribution while the fan is developing. The three-dimensional fan simulation also exhibited the downstream fining of sediments from the fan apex to the peripheries. Further, the simulated fan also developed complex internal sediment stratification which is modelled by SSSPAM. Currently such complex sediment stratification is thought to be a result of allogenic processes. However, this simulation shows that, such complex internal sediment structures can develop through autogenic processes as well. © 2020 John Wiley & Sons, Ltd.     

The long-term stability of engineered landforms of the Ranger Uranium Mine,Northern Territory,Australia: application of a catchment evolution model

There is a need to assess the long-term stability of engineered landforms associated with the rehabilitation of Ranger Uranium Mine, Northern Territory, Australia, as it is a requirement that mill tailings must be contained for periods in excess of 1000 years. The geomorphic model, SIBERIA, is calibrated on hydrologic and erosion data collected by a combination of monitoring and rainfall simulation experiments on the waste rock dumps of Ranger. Preliminary analysis of Ranger's preferred above-grade option suggests that erosion of the order of 7 to 8 m will occur on the structure in a period of 1000 years. This depth of erosion may be sufficient to compromise the integrity of containment. It is shown that SIBERIA has significant advantages over steady-state erosion models. Suggestions are made for the design that will enhance the stability of the structure and extend the structural life of the containment. © 1998 John Wiley & Sons, Ltd.     

Scraping and extirpating: two strategies to induce recovery of diseased Gorgonia ventalina sea fans

Coral diseases are currently playing a major role in the worldwide decline in coral reef integrity. One of the coral species most afflicted by disease in the Caribbean, and which has been the focus of much research, is the sea fan Gorgonia ventalina. There is, however, very little information regarding the capacity of sea fans to recover after being infected. The aim of this study was to compare the rehabilitation capacity of G. ventalina after diseased‐induced lesions were eliminated either by scraping or extirpating the affected area. Scraping consisted of removing any organisms overgrowing the axial skeleton from the diseased area as well as the purple tissue bordering these overgrowths using metal bristle brushes. Extirpation consisted of cutting the diseased area, including the surrounding purpled tissue, using scissors. The number of scraped colonies that fully or partially rehabilitated after being manipulated and the rates at which the sea fans whose lesions were scrapped grew back healthy tissue were compared among: (i) colonies that inhabited two sites with contrasting environmental conditions; (ii) colonies of different sizes and (iii) colonies with different ratios of area of legions to total colony area (LA/CA). Both strategies proved to be very successful in eliminating lesions from sea fans. In the case of scraping, over 51% of the colonies recovered between 80% and 100% of the lost tissue within 16 months. The number of colonies that recovered from scraping was similar among sites and among colony sizes, but differed significantly depending on the relative amount of lesion to colony area (LA/CA). When lesions were extirpated, lesions did not reappear in any of the colonies. We conclude that lesion scraping is useful for eliminating relatively small lesions (i.e. LA/CA < 10%), as these are likely to recover in a shorter period of time, whereas for relatively large lesions (LA/CA ≥ 10%) it is more appropriate to extirpate the lesion.     

The role of topography in controlling throughflow generation: A discussion

The distributions of specific catchment area and specific dispersal area values over the hillside studied by Anderson and Burt (1978) relate much more closely to the observed distributions of soil water matric potential than do the occurrences of contour concavity on which the authors rely. Highest potential always occurred in the zone of large specific catchment area except immediately after rainfall, when it occurred in the zone of small dispersal area. Isolines of low potential persistently conformed to those of specific dispersal area.     

A study of the 2.5–25 μm spectrum of H2O ice

We present new absorbance spectra of the 3-, 6- and 12-μm features of amorphous and crystalline H₂O ice obtained between 10 and 140 K. Three sets of measurements have been made. In series I, the ice film was initially deposited on to a CsI substrate at 10 K and successive spectra were then obtained at intermediate temperatures as the ice was warmed up to 140 K. The second set, series II, comprises spectra for ice films deposited and measured at temperatures between 10 and 140 K. In the third set of measurements, series III, spectra were obtained for an ice film deposited at 140 K and then at intermediate temperatures as the film was cooled down to 10 K. The series I and II results show that the ice undergoes an amorphous-to-crystalline phase transition in the 110–120 K range. The 3- and 12-μm bands have similar trends in full width at half-maximum (FWHM) and opposite peak wavelength shifts. The temperature behaviour of the 6-μm band is different, as no clear phase transition temperature can be discerned from its FWHM and peak wavelength position data. In the series III spectra the peak wavelength positions and FWHM of the three bands remain relatively constant, thus demonstrating the stability of the crystalline phase against thermal cycling. A comparison between the laboratory results and astronomical spectra suggests that the identification of the librational band of H₂O ice in OH 231.8 + 4.2 may be incorrect.     

Petrographic variation in the Springfield (No. 9) coal in Western Kentucky

The Springfield (Western Kentucky No. 9) coal of the Carbondale Formation (Middle Pennsylvanian) in the Western Kentucky Coal Field of the Illinois Basin was sampled in eleven mines from one to three channels of three equal benches. The rank of the coal is high-volatile C bituminous in the Moorman Syncline and in the Henderson Basin and high-volatile B bituminous in the Webster Syncline. The percentage of total vitrinite macerals and of total vitrinite plus liptinite was found to decrease significantly from the bottom bench through to the top bench. In a comparison of the sources of variation within the set of maceral data it was found that the only significant variation in the vitrinite and vitrinite plus liptinite percentages was between the benches. Both the rank of the coal and the maceral percentages are varying in a predictable manner.