Olivine or impact melt: Nature of the “Orange” material on Vesta from Dawn

NASA’s Dawn mission observed a great variety of colored terrains on asteroid (4) Vesta during its survey with the Framing Camera (FC). Here we present a detailed study of the orange material on Vesta, which was first observed in color ratio images obtained by the FC and presents a red spectral slope. The orange material deposits can be classified into three types: (a) diffuse ejecta deposited by recent medium-size impact craters (such as Oppia), (b) lobate patches with well-defined edges (nicknamed “pumpkin patches”), and (c) ejecta rays from fresh-looking impact craters. The location of the orange diffuse ejecta from Oppia corresponds to the olivine spot nicknamed “Leslie feature” first identified by Gaffey (Gaffey, M.J. [1997]. Icarus 127, 130–157) from ground-based spectral observations. The distribution of the orange material in the FC mosaic is concentrated on the equatorial region and almost exclusively outside the Rheasilvia basin. Our in-depth analysis of the composition of this material uses complementary observations from FC, the visible and infrared spectrometer (VIR), and the Gamma Ray and Neutron Detector (GRaND). Several possible options for the composition of the orange material are investigated including, cumulate eucrite layer exposed during impact, metal delivered by impactor, olivine–orthopyroxene mixture and impact melt. Based on our analysis, the orange material on Vesta is unlikely to be metal or olivine (originally proposed by Gaffey (Gaffey, M.J. [1997]. Icarus 127, 130–157)). Analysis of the elemental composition of Oppia ejecta blanket with GRaND suggests that its orange material has ∼25% cumulate eucrite component in a howarditic mixture, whereas two other craters with orange material in their ejecta, Octavia and Arruntia, show no sign of cumulate eucrites. Morphology and topography of the orange material in Oppia and Octavia ejecta and orange patches suggests an impact melt origin. A majority of the orange patches appear to be related to the formation of the Rheasilvia basin. Combining the interpretations from the topography, geomorphology, color and spectral parameters, and elemental abundances, the most probable analog for the orange material on Vesta is impact melt.     

Geophysical models for the tectonic framework of the Lake Vostok region, East Antarctica

Aerogeophysical and seismological data from a geophysical survey in the interior of East Antarctica were used to develop a conceptual tectonic model for the Lake Vostok region. The model is constrained using three independent data sets: magnetic, seismic, and gravimetric. A distinct change in the aeromagnetic anomaly character across Lake Vostok defines a crustal boundary. Depth to magnetic basement estimates image a 400-km-wide and more than 10-km-deep sedimentary basin west of the lake. Analysis of teleseismic earthquakes suggests a relatively thin crust beneath Lake Vostok consistent with predictions from kinematic and flexural gravity modelling. Magnetic, gravity, and subglacial topography data reveal a tectonic boundary within East Antarctica. Based on our kinematic and flexural gravity modelling, this tectonic boundary appears to be the result of thrust sheet emplacement onto an earlier passive continental margin. No data presently exist to date directly either the timing of passive margin formation or the subsequent shortening phase. The preserved thrust sheet thickness is related to the thickness of the passive margin crust. Because a significant amount of time is required to erode the thrust sheet topography, we suggest that these tectonic events are Proterozoic in age. Minor normal reactivation of the thrust sheet offers a simple mechanism to explain the formation of the Lake Vostok Basin. A low level of seismicity exists in the vicinity of this tectonic boundary. The existence of a crustal boundary in the Antarctic interior provides new constraints on the Proterozoic architecture of the East Antarctic craton.     

Physical properties of Titan's surface at the Huygens landing site from the Surface Science Package Acoustic Properties sensor (API-S)

We present the results from the first sonar to be deployed outside of Earth, and the first active acoustic instrument on Titan, onboard the Huygens probe, and the implications of its data for the geomorphology and characteristics of the Huygens landing site. Signals were recorded from 90 m downwards until impact, with a maximum sensor footprint diameter at the ground of 39.2 m. Probe impact speed was measured to be 4.67 m s⁻¹. Derivation of terrain topography in a transect beneath the probe may indicate a ridge-trough terrain with an amplitude of about 1 m and a wavelength of about 10 m, although a flat surface is also consistent with the results. Modelling of the returned signal indicates that the surface acoustic properties at the landing site must be specular in nature, which may have two possible (not incompatible) causes—the surface may consist of sorted interlocking grains, smooth on the centimetre scale, which would imply either fluvial sorting or the infill of small particles interstitial to the larger particles (similar to a terrestrial playa). Alternatively, specularity may indicate the presence of methane as an interstitial liquid or as very small pools. Due to mission constraints, tens of metres around the landing site were not well-imaged by Huygens' cameras except for the narrow azimuth observed after impact (the camera did not look straight down, and was not in imaging mode during the last few hundred metres of descent). Thus the data presented are among the few direct observations of the landing site surroundings.     

Structural controls on sulphide deposition at the dyke–lava boundary, slow-spreading ocean crust, Macquarie Island

Ocean Drilling Program hole 504B revealed an ocean crust hydrothermal sulphur anomaly on the dyke–lava transition, with implications for global sulphur sinks. Here we confirm the presence of the anomaly sporadically along 7.5 km of dyke–basalt contact on the Macquarie Ridge at Macquarie Island, a 39–9.7 Ma slow‐spreading setting. Background contact‐zone pyrite S contents average 1845 p.p.m. across ～50 m. However, zones of small‐scale brittle faulting that commonly occur on and above the dyke–basalt contact average between 5000 and 11 000 p.p.m. S (20–30 m widths). These consist of steep ridge‐parallel faults and fault splays on the contact, overlain by up to 50 m of linked pyritic fault trellis. The contact zone faults are haloed by disseminated pyrite–chlorite, cross‐cut by quartz–chlorite–sphalerite and epidote‐cemented breccias, containing evidence of turbulent flow. The structural control on sulphur deposition is attributed to the active extensional slow spreading setting. With increasing extension, diffuse mixing across the contact was replaced by channellized flow and dynamic mixing in fault arrays. The magnitude of the dyke–lava transition sulphur sink must be reassessed to take account of this heterogeneity.     

Tsunami hazard assessment of Canada

We present a preliminary probabilistic tsunami hazard assessment of Canadian coastlines from local and far-field, earthquake, and large submarine landslide sources. Analyses involve published historical, palaeotsunami and palaeoseismic data, modelling, and empirical relations between fault area, earthquake magnitude, and tsunami run-up. The cumulative estimated tsunami hazard for potentially damaging run-up (≥1.5 m) of the outer Pacific coastline is ~40–80 % in 50 years, respectively one and two orders of magnitude greater than the outer Atlantic (~1–15 %) and the Arctic (<1 %). For larger run-up with significant damage potential (≥3 m), Pacific hazard is ~10–30 % in 50 years, again much larger than both the Atlantic (~1–5 %) and Arctic (<1 %). For outer Pacific coastlines, the ≥1.5 m run-up hazard is dominated by far-field subduction zones, but the probability of run-up ≥3 m is highest for local megathrust sources, particularly the Cascadia subduction zone; thrust sources further north are also significant, as illustrated by the 2012 Haida Gwaii event. For Juan de Fuca and Georgia Straits, the Cascadia megathrust dominates the hazard at both levels. Tsunami hazard on the Atlantic coastline is dominated by poorly constrained far-field subduction sources; a lesser hazard is posed by near-field continental slope failures similar to the 1929 Grand Banks event. Tsunami hazard on the Arctic coastline is poorly constrained, but is likely dominated by continental slope failures; a hypothetical earthquake source beneath the Mackenzie delta requires further study. We highlight areas susceptible to locally damaging landslide-generated tsunamis, but do not quantify the hazard.     

Subsurface Injection of Treated Sewage into a Saline-Water Aquifer at St. Petersburg, Florida — Water-Quality Changes and Potential for Recovery of Injected Sewage

The city of St. Petersburg is testing subsurface injection of treated sewage into the Floridan aquifer as a means of eliminating discharge of sewage to surface waters and as a means of storing treated sewage for future nonpotable reuse. The injection zone at the test site at the start of injection contained saline water with chloride concentrations ranging from 14,000 to 20,000 milligrams per liter (mg/1). Treated sewage with a mean chloride concentration of 170 mg/1 was injected through a single well for 12 months at a mean rate of 4.7 × 10⁵ cubic feet per day. The volume of water injected during the year was 1.7 × 10⁸ cubic feet. Dissolved oxygen was contained in the sewage prior to injection. Water removed from the injection zone during injection was essentially free of oxygen. Probable growth of denitrifying bacteria and, thus, microbial denitri-fication, was suggested by bacterial counts in water from two observation wells that were close to the injection well. The volume fraction of treated sewage in water from wells located 35 feet and 733 feet from the injection well and open to the upper part of the injection zone stabilized at about 0.9 and 0.75, respectively. Chloride concentrations stabilized at about 1,900 mg/1 in water from the well that was 35 feet from the injection well and stabilized at about 4,000 mg/1 in water from the well that was 733 feet from the injection well. These and other data suggest that very little near injection-quality treated sewage would be recoverable from storage in the injection zone.