The Air-Coastal Sea Chemical Exchange: A Case Study on the New Jersey Coast

The coastal marine atmosphere adjacent to large urban and industrial centers is in general strongly impacted by pollution emissions, resulting in high loading of pollutants in the ambient air. Among the airborne substances are certain trace elements from a variety of emission sources that can serve as micronutrients to marine organisms in coastal waters. High concentrations of such elements in coastal air can result in enhanced air-to-sea deposition fluxes to coastal waters. They could also be transported over the open ocean, affecting the composition of the remote marine atmosphere and then ocean ecosystems. To provide better understanding of the extent of air-to-sea deposition processes on the New Jersey coast, a heavily polluted coastal region on the US East Coast, a synthesis of observation data was carried out for selected trace elements, including Fe, Cd, Cr and Cu, derived from measurements of both size-segregated and bulk aerosol particles, as well as precipitation around the New Jersey coast. The atmospheric input of Hg was also estimated based on measurement data. Results indicated that the total deposition fluxes of most trace elements were higher in Northern coastal NJ compared to Southern coastal NJ, reflecting the differences in the source strengths of these element emissions between the two coastal regions. Dry deposition processes were more significant for common dust-derived elements, particularly Fe and Al, compared with their wet deposition fluxes. However, the processes of precipitation scavenging appeared to be more important for the elements that were often enriched in fine particles including Zn, Cu, Pb and Ni. The removal of Hg from the ambient air was overwhelmingly dominated by atmospheric wet deposition. In the future, atmospheric measurements at more sites on the NJ coast should be performed simultaneously to reduce the spatial and temporal uncertainties associated with atmospheric deposition fluxes estimated in this study.     

Variations of Hydrodynamics and Submarine Groundwater Discharge in the Yellow River Estuary Under the Influence of the Water-Sediment Regulation Scheme

The “Water-Sediment Regulation Scheme” (WSRS) is critically important to the hydrologic evaluation of the Yellow River estuary since a huge pulse of water and sediment are delivered into the sea during a short period. We used the natural geochemical tracers radium (²²³Ra, ²²⁴Ra, ²²⁶Ra) and radon (²²²Rn) isotopes as well as other hydrological parameters to investigate the mixing variations and submarine groundwater discharge (SGD) in the Yellow River estuary under the influence of the 2013 WSRS. Dramatically elevated radium and radon isotopic activities were observed during this WSRS compared with activities measured during a non-WSRS period. Radium “water ages” indicated that the offshore transport rate nearly tripled when the river discharge increased from 400 to 3400 m³/s. We calculated the SGD flux in the Yellow River estuary based on a radium mass balance model as well as radium and radon time-series models. The SGD flux was estimated at 0.02~0.20 m/day during a non-WSRS period and 0.67~1.22 m/day during the 2013 WSRS period. The results also indicate that large river discharge tends to lead more intense SGD along the river channel direction with a large amount of fresh SGD.     

Quantities and Fluxes of Dissolved and Particulate Black Carbon in the Changjiang and Huanghe Rivers,China

Recent studies have suggested that large rivers play important roles in mobilizing and transporting black carbon (BC) from land to the ocean. However, the influence of the Changjiang and Huanghe, the two largest rivers in China, on the fate of BC has not been determined. In this paper, we present measurements of BC in both the dissolved and particulate phases in the Changjiang and Huanghe Rivers and in the coastal waters of the East China Sea (ECS). Our results show that dissolved black carbon (DBC) accounted for 3.0 ± 0.4 % and 4.8 ± 3.6 % of the total DOC pool in the Changjiang and Huanghe Rivers and 3.4 ± 0.6 % of the DOC pool in the coast of the ECS. In addition, particulate black carbon (PBC) accounted for 13 ± 0.9 % and 22 ± 11 % of the POC pool in the Changjiang and Huanghe Rivers, respectively. We calculate that the Changjiang and Huanghe transported 4.7 × 10¹⁰ gC and 1.7 × 10⁹ gC of DBC, and 2.0 × 10¹¹ gC and 1.2 × 10¹⁰ gC of PBC to the ECS and Bohai Sea in 2015. The large amounts of BC transported by the two rivers represent a major sink of anthropogenically derived organic carbon and could have a significant impact on the ecosystem and carbon cycling in China’s marginal seas.     

Calculation method for thickness of discontinuous boundary layer of engineering pavement

The boundary layer is a buffer layer of water and heat exchange between the atmosphere and permafrost.Based on the atmospheric boundary layer and heat transfer theory,we established a method for determining the boundary layer thickness of engineering pavement(asphalt and sand pavement)in permafrost region.The boundary layer can be divided into the Boundary Layer Above Surface(BLAS)and the Boundary Layer Below Surface(BLBS).From in-situ monitoring data,the thickness of BLAS was determined through the laminar thickness,and the thickness of BLBS was determined through ground temperature,the heat conduction function,and the mean attenuation function(α).For asphalt pavement,the BLAS thickness varied between 2.90 and 4.31 mm and that of BLBS varied between 28.00 and 45.38 cm.For sand pavement,the BLAS thickness varied between 2.55 and 3.29 mm and that of BLBS varied between 15.00 and 46.44 cm.The thickness varied with freezing and thawing processes.The boundary layer calculation method described in this paper can provide a relatively stable boundary for temperature field analysis.     

Spatiotemporal distribution and historical evolution of polders in the Dongting Lake area,China

Dongting Lake is the largest lake in the middle reaches of the Yangtze River in China. For centuries, people inhabiting the Dongting Lake area have been reclaiming land and constructing dams for flood resistance, agricultural production, and rural settlement, forming geographical entities known as polders. In this study, the regional spatial distributions of polders in the Dongting Lake area in 1949, 1998, and 2013 were obtained using historical maps and modern remotely sensed data, revealing changes since the establishment of the People’s Republic of China. Nanxian County was then selected to demonstrate polder changes at the county level, because it has undergone the most dramatic changes in the area. Different polder change models for the Datonghu, Yule, and Renhe polders were analyzed for eight periods: 1644 (the early Qing Dynasty), 1911 (the late Qing Dynasty), 1930 (the Republic of China), 1949 (the People’s Republic of China), 1963, 1970, 1998, and 2013. Three resulting polder evolution models are: 1) reclaiming polders from lakes, 2) integrating polders by stream merging, and 3) abandoning polders for flood release. The polder evolution models demonstrate the wisdom of local people in using land resources according to the specific regional conditions. Throughout their long-term historical evolution, the spatial distribution of polders in the Dongting Lake area tended to be homogeneous, and the degree of human disturbance tended to be stable. However, a shift occurred, from pure polder area growth or removal to more comprehensive management and protection of the regional environment.     

Curvedness feature constrained map matching for low-frequency probe vehicle data

Map matching method is a fundamental preprocessing technique for massive probe vehicle data. Various transportation applications need map matching methods to provide highly accurate and stable results. However, most current map matching approaches employ elementary geometric or topological measures, which may not be sufficient to encode the characteristic of realistic driving paths, leading to inefficiency and inaccuracy, especially in complex road networks. To address these issues, this article presents a novel map matching method, based on the measure of curvedness of Global Positioning System (GPS) trajectories. The curvature integral, which measures the curvedness feature of GPS trajectories, is considered to be one of the major matching characteristics that constrain pairwise matching between the two adjacent GPS track points. In this article, we propose the definition of the curvature integral in the context of map matching, and develop a novel accurate map matching algorithm based on the curvedness feature. Using real-world probe vehicles data, we show that the curvedness feature (CURF) constrained map matching method outperforms two classical methods for accuracy and stability under complicated road environments.     

Altitudinal trends in δ<Superscript>13</Superscript>C value,stomatal density and nitrogen content of <Emphasis Type="Italic">Pinus tabuliformis</Emphasis> needles on the southern slope of the middle Qinling Mountains,China

In this study, a coniferous tree species (Pinus tabuliformis Carr.) was investigated at a moderate-altitude mountainous terrain on the southern slope of the middle Qinling Mountains (QLM) to detect the trends in carbon isotope ratio (δ¹³C), leaf nitrogen content (LNC) and stomatal density (SD) with altitude variation in north-subtropical humid mountain climate zone of China. The results showed that LNC and SD both significantly increased linearly along the altitudinal gradient ranging from 1000 to 2200 m, whereas leaf δ¹³C exhibited a significantly negative correlation with the altitude. Such a correlation pattern differs obviously from that obtained in offshore low-altitude humid environment or inland high-altitude semi-arid environment, suggesting that the pattern of increasing δ¹³C with the altitude cannot be generalized. The negative correlation between δ¹³C and altitude might be attributed mainly to the strengthening of carbon isotope fractionation in plants caused by increasing precipitation with altitude. Furthermore, there was a remarkable negative correlation between leaf δ¹³C and LNC. One possible reason was that increasing precipitation that operates to increase isotopic discrimination with altitude overtook the LNC in determining the sign of leaf δ¹³C. The significant negative correlation between leaf δ¹³C and SD over altitudes was also found in the present study, indicating that increases in SD with altitude would reduce, rather than enhance plant δ¹³C values.     

Development of three multiplex PCR primer sets for ark shell (<Emphasis Type="Italic">Scapharca broughtonii</Emphasis>) and their validation in parentage assignment

Scapharca broughtonii is a commercially important and over-exploited species. In order to investigate its genetic diversity and population structure, 43 novel polymorphic microsatellites were isolated and characterized. The number of alleles per locus ranged from 3 to 22 with an average of 6.93, and the observed and expected heterozygosities varied between 0.233 and 1.000, and 0.250 and 0.953, with an average of 0.614 and 0.707, respectively. Three highly informative multiplex PCRs were developed from nine of those microsatellites for S. broughtonii. We evaluated and validated these multiplex PCRs in 8 full-sib families. The average polymorphism information content (PIC) was 0.539. The frequency of null alleles was estimated as 3.13% of all the alleles segregation based on a within-family analysis of Mendelian segregation patterns. Parentage analysis of real offspring demonstrated that 100% of all offspring were unambiguously allocated to a pair of parents based on 3 multiplex sets. Those 43 microsatellite loci with high variability will be helpful for the analysis of population genetics and conservation of wild stock of S. broughtonii. The 3 sets of multiplex PCRs could be an important tool of pedigree reconstruction, population genetic analysis and brood stock management.     

Antialgal and antilarval activities of bioactive compounds extracted from the marine dinoflagellate <Emphasis Type="Italic">Amphidinium carterae</Emphasis>

With the global ban on the application of organotin-based marine coatings by the International Maritime Organization, the development of environmentally friendly, low-toxic and nontoxic antifouling compounds for marine industries has become an urgent need. Marine microorganisms have been considered as a potential source of natural antifoulants. In this study, the antifouling potential of marine dinoflagellate Amphidinium carterae, the toxic and red-tide microalgae, was investigated. We performed a series of operations to extract the bioactive substances from Amphidinium carterae and tested their antialgal and antilarval activities. The crude extract of Amphidinium carterae showed significant antialgal activity and the EC₅₀ value against Skeletonema costatum was 55.4 μg mL^?1. After purification, the isolated bioactive substances (the organic extract C) exhibited much higher antialgal and antilarval activities with EC₅₀ of 12.9 μg mL^?1 against Skeletonema costatum and LC₅₀ of 15.1 μg mL^?1 against Amphibalanus amphitrite larvae. Subsequently, IR, Q-TOFMS, and GC-MS were utilized for the structural elucidation of the bioactive compounds, and a series of unsaturated and saturated 16- to 22-carbon fatty acids were detected. The data suggested the bioactive compounds isolated from Amphidinium carterae exhibited a significant inhibiting effect against the diatom Skeletonema costatum and Amphibalanus amphitrite larvae, and could be substitutes for persistent, toxic antifouling compounds.