Quantifying the role of sandy–silty sediments in generating slope failures during earthquakes: example from the Algerian margin

The Algerian margin is a seismically active region, where during the last century, several large magnitude earthquakes took place. This study combines geotechnical and sedimentological data with numerical modelling to quantitatively assess the present-day slope stability of the Algerian margin. Geotechnical laboratory tests, such as cyclic triaxial tests, oedometric tests and vane shear tests were carried out on sediment cores collected on the study area. The liquefaction potential of a sediment column located about 30 km from the Boumerdès earthquake epicentre of 21st May 2003 was evaluated theoretically for an earthquake of M _w  = 6.8. We show that thin sand and silt beds such as those described on recovered sediment cores are the main cause of sediment deformation and liquefaction during earthquakes. Numerical calculations showed that the slope failure may occur during an earthquake characterised by a PGA in excess of 0.1g, and also that, under a PGA of 0.2g liquefaction could be triggered in shallow silty–sandy deposits. Moreover, comparison of the predicted slope failure with failure geometries inferred from seafloor morphology showed that earthquakes and subsequent mass movements could explain the present-day morphology of the study area.     

Evaluation of inundation areas resulting from the diversion of an extreme discharge towards the sea: case study in Tabasco,Mexico

This investigation comprises the hydraulic characterisation of a river located in the Mexican State of Tabasco, including the performance of its flood plain under the action of an extreme river discharge. This is done through the combination of a high‐quality validation dataset, remote sensing information, and a standard 2D numerical model. The dataset was collected during an intensive field campaign that took place in August 2009. In particular, in situ measurements of river discharge, bathymetry, water level, and velocities through a whole tidal cycle are employed along with multi‐spectral satellite imagery. The purpose of this study is twofold. Firstly, the integrated approach comprising the combination of a 2D hydrodynamic model, high‐quality in situ measurements and satellite imagery reduce the uncertainty in the model parameterisation and results. Secondly, it is shown that freely available sources of information, such as the Shuttle Radar Topographic Mission (SRTM) data can be processed and utilized in 2D hydraulic models. This is particularly important in countries where high‐resolution elevation data is not yet available. It is demonstrated that the selected approach is useful when the study of possible consequences in a flood plain induced by an extreme flood discharge are sought. Copyright © 2011 John Wiley & Sons, Ltd.     

Fluid–Rock Interactions in Geothermal Reservoirs,Germany: Thermal Autoclave Experiments Using Sandstones and Natural Hydrothermal Brines

As renewable energy, geothermal can contribute substantially to the energy transition. To generate electricity or to harvest heat, high-saline fluids are tapped by wells of a few kilometres and extracted from hydrothermal reservoirs. After the heat exchanger units have been passed by, these fluids are reinjected into the reservoir. Due to the pressure and temperature differences between the subsurface and the surface, as well as the cooling of the fluids in the power plant, unwanted chemical reactions can occur within the reservoir, in the borehole, and within the power plant itself. This can reduce the permeability of the reservoir as well as the output of the geothermal power plant. This study aims to simulate real subsurface reactions using batch and leaching experiments with sandstone or sandstone powder as solid phase, and deionised water or natural brine as liquid phase. It is demonstrated that fluid composition changes after only a few days. In particular, calcite, aragonite, clay minerals, and zinc phases precipitate from the natural brine. In contrast, in particular minerals containing potassium, arsenic, barium, and silica are dissolved. Due to the experimental set-up, these mineral reactions mainly took place on the surface of the samples, which is why no substantial changes in petrophysical properties could be observed. However, it is assumed that the observed reactions on the reservoir scale have a relevant influence on parameters such as permeability.

     

Phase equilibrium modelling of the amphibolite facies metamorphism in the Yelapa-Chimo Metamorphic Complex,Mexico

The Yelapa-Chimo Metamorphic Complex forms part of the Jalisco Block in western Mexico and exposes a wide range of Early Cretaceous metamorphic rocks;such as paragneiss,orthogneiss,amphibolites,and migmatites.However,the pressure-temperature(P-T)conditions of metamorphism and partial melting remain poorly studied in the region.To elucidate metamorphic P-T conditions,phase equilibrium modelling was applied to two sillimanite-garnet paragneisses,one amphibole-orthogneiss,and one amphibolite.Sillimanite-garnet paragneisses exhibit a lepidoblastic texture with a biotite+sillimanite+kyanite+garnet+quartz+plagioclase+K-feldspar mineral assemblage.Amphibole-orthogneiss and amphibolite display a nematoblastic texture with an amphibole+(1)plagioclase+quartz+(1)titanite assemblage and an amphibole+(2)plagioclase+(2)titanite+ilmenite retrograde mineral assemblage.Pseudosections calculated for the two sillimanite-garnet paragneiss samples show P-T peak conditions at~6-7.5 kbar and~725-740℃.The results for amphibole-orthogneiss and the amphibolite yield P-T peak conditions at~8.5-10 kbar and~690-710℃.The mode models imply that metasedimentary and metaigneous units can produce up to~20 vol%and~10 vol%of melt,respectively.Modelling within a closed system during isobaric heating suggests that melt compositions of metasedimentary and metaigneous units are likely to have direct implications for the petrogenesis of the Puerto Vallarta Batholith.Our new data indicate that the Yelapa-Chimo Metamorphic Complex evolved through a metamorphic gradient between~23-33℃km^-1and the metamorphic rocks formed at depths between~22 km and~30 km with a burial rate of~2.0 km Ma^-1.Finally,the P-T data for both metasedimentary and metaigneous rocks provide new constraints on an accretionary framework,which is responsible for generating metamorphism and partial melting in the YelapaChimo Metamorphic Complex during the Early Cretaceous.     

Changes in ostracod assemblages and morphologies during lake‐level variations of Lago Cardiel (49°S), Patagonia,Argentina, over the last 15.6 ka

Changes in the ostracod assemblages from two sediment cores collected from Lago Cardiel in southeastern Patagonia (49°S) reflect the main regional abrupt climatic changes over the last 15.6 cal. ka BP. Shifts in species abundance and switches in dominances suggest that these were mainly driven by variable salinity. During the Late Pleistocene, Limnocythere rionegroensis was abundant and dominant, indicating waters with high salinity and prevalence of evaporative processes. Between 12.6 and 10.8 cal. ka BP, Lago Cardiel expanded markedly and reached an Early Holocene highstand of +55 m above present lake level. A major change in ostracod assemblage in which Limnocythere patagonica appears as the dominant species in parallel with the disappearance of L. rionegroensis and Eucypris aff. cecryphalium mirrored this transitional period between the cold and dry Late Pleistocene and the humid and warm Early Holocene. Over the last 4 cal. ka BP, L. rionegroensis returned to the species assemblage and Riocypris whatleyi increased its abundance pointing towards increasing salinities. The variations in size, shape and ornamentation of L. rionegroensis and R. whatleyi fossil valves were examined using geometric morphometric techniques and further compared to those of modern Patagonian sites. Limnocythere rionegroensis specimens displayed high morphological variability during the evolution of Lago Cardiel. More specifically, the switch in reproductive mode – from sexual to parthenogenetic– and the increase in valve ornamentation around 12.7 cal. ka BP suggest that these changes were promoted by the hydrological alteration that occurred in the Late Pleistocene. This exercise provides a robust range of morphological variation for these proxies, which will be useful in further taxonomic and palaeoenvironmental studies adding more information about different factors influencing the observed morphological trends.     

The impact of heat waves on surface urban heat island and local economy in Cluj-Napoca city,Romania

The association between heat waves and the urban heat island effect can increase the impact on environment and society inducing biophysical hazards. Heat stress and their associated public health problems are among the most frequent. This paper explores the heat waves impact on surface urban heat island and on the local economy loss during three heat periods in Cluj-Napoca city in the summer of 2015. The heat wave events were identified based on daily maximum temperature, and they were divided into three classes considering the intensity threshold: moderate heat waves (daily maximum temperature exceeding the 90th percentile), severe heat waves (daily maximum temperature over the 95th percentile), and extremely severe heat waves (daily maximum temperature exceeding the 98th percentile). The minimum length of an event was of minimum three consecutive days. The surface urban heat island was detected based on land surface temperature derived from Landsat 8 thermal infrared data, while the economic impact was estimated based on data on work force structure and work productivity in Cluj-Napoca derived from the data released by Eurostat, National Bank of Romania, and National Institute of Statistics. The results indicate that the intensity and spatial extension of surface urban heat island could be governed by the magnitude of the heat wave event, but due to the low number of satellite images available, we should consider this information only as preliminary results. Thermal infrared remote sensing has proven to be a very efficient method to study surface urban heat island, due to the fact that the synoptic conditions associated with heat wave events usually favor cloud free image. The resolution of the OLI_TIRS sensor provided good results for a mid-extension city, but the low revisiting time is still a drawback. The potential economic loss was calculated for the working days during heat waves and the estimated loss reached more than 2.5 mil. EUR for each heat wave day at city scale, cumulating more than 38 mil. EUR for the three cases considered.     

Phytoplankton variation and its relation to nutrients and allochthonous organic matter in a coastal lagoon on the Gulf of Mexico

In tropical and subtropical zones, coastal lagoons are surrounded by mangrove communities which are a source of high quantity organic matter that enters the aquatic system through litter fall. This organic matter decomposes, becoming a source of nutrients and other substances such as tannins, fulvic acids and humic acids that may affect the composition and productivity of phytoplankton communities. Sontecomapan is a coastal lagoon located in the southern Gulf of Mexico, which receives abundant litter fall from mangrove. To study the phytoplankton composition and its variation in this lagoon from October 2002 to October 2003, we evaluated the concentrations of dissolved folin phenol active substances (FPAS) as a measure of plant organic matter, salinity, temperature, pH, O₂, N-NH₄⁺, N-NO₃⁻, P-PO₄³⁻, Si-SiO₂, and phytoplanktonic cell density in different mangrove influence zones including the three main rivers that feed the lagoon. Nutrients concentrations depended on freshwater from rivers, however these varied seasonally. Concentrations of P-PO₄³⁻, N-NH₄⁺ and FPAS were the highest in the dry season, when maximum mangrove litter fall is reported. Variation of these nutrients seemed to depend on the internal biogeochemical processes of the lagoon. Blooms of diatoms (Skeletonema spp., Cyclotella spp. and Chaetoceros holsaticus) and dinoflagellates (Peridinium aff. quinquecorne, Prorocentrum cordatum) occurred seasonally and in the different mangrove influence zones. The high cell densities in these zones and the occurrence of certain species and its ordination along gradient of FPAS in a canonical correspondence analysis, suggest that plant organic matter (i.e. mangrove influence) may contribute to phytoplankton dynamics in Sontecomapan lagoon.     

Hydrogeochemical and nitrate isotopic evolution of a semiarid mountainous basin aquifer of glacial-fluvial and paleolacustrine origin (Lake Titicaca,Bolivia): the effects of natural processes and anthropogenic activities

Hydrogeology Journal - A hydrogeochemical and stable isotopic ( $${\updelta }^{15}{\mathrm{N}}_{{\mathrm{NO}}_{3}}$$ and $${\updelta }^{18}{\mathrm{O}}_{{\mathrm{NO}}_{3}}$$ ) multitracer approach...     

Numerical modeling of hydrodynamics and sediment transport—an integrated approach

Point measurement-based estimation of bedload transport in the coastal zone is very difficult. The only way to assess the magnitude and direction of bedload transport in larger areas, particularly those characterized by complex bottom topography and hydrodynamics, is to use a holistic approach. This requires modeling of waves, currents, and the critical bed shear stress and bedload transport magnitude, with a due consideration to the realistic bathymetry and distribution of surface sediment types. Such a holistic approach is presented in this paper which describes modeling of bedload transport in the Gulf of Gdańsk. Extreme storm conditions defined based on 138-year NOAA data were assumed. The SWAN model (Booij et al. 1999) was used to define wind–wave fields, whereas wave-induced currents were calculated using the Ko?odko and Gic-Grusza (2015) model, and the magnitude of bedload transport was estimated using the modified Meyer-Peter and Müller (1948) formula. The calculations were performed using a GIS model. The results obtained are innovative. The approach presented appears to be a valuable source of information on bedload transport in the coastal zone.