相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

遥感技术在地质找矿中的应用及发展前景

遥感技术作为矿产勘查的一种手段应用于找矿,并取得了一定成就.遥感技术的直接应用是蚀变遥感信息的提取,遥感技术的间接应用包括地质构造信息、植被的光谱特征及矿床改造信息等方面.遥感找矿具有很大的发展前景的领域主要有:高光谱数据、数据融合技术、3S的紧密结合、计算机技术的发展.     

A New Female Cone, Araucaria beipoiaoensis sp. nov. from the Middle Jurassic Tiaojishan Formation, Beipiao, Western Liaoning, China and Its Evolutionary Significance

A new species of Araucaria, Araucaria beipiaoensis sp. nov., collected from the Middle Jurassic Tiaojishan Formation, southern hill of Shebudai village, near Beipiao city, western Liaoning is based on a permineralized female cone, which is ovate to elliptical in shape, about 11 cm × 7 cm × 4.5 cm in size. The cone bears rhomboid bracts that are spirally attached, texture thicker, with wings on both sides, with a detached lamina-like apex at the tip. In inner structure the ovuliferous scales are thicker and fused with bracts at the end with a ligular sulcns. There is one wingless ovule/seed per seed-scale complex embedded in the ovuliferous scale tissue, with the micropyle directed toward the cone axis. The ovules/seeds are long ovate or elliptical in shape, 1 cm long and near the base about 3 mm in diameter; the ovule/seed integuments have begun differentiation into 3 layers： the sarcotesta, sclerotesta, and endotesta. The nucellus is free from the enclosing integuments except in the chalazal region where it is fused to the inner layer （endotesta） of integument. Some ovules show cellularized nucellar tissue. Mature seeds exhibit the papery-thin wavy nucellus characteristically near to the micropyle. The embryonic tissue appears to be four cotyledons. The morphology and structure of the cone shows a close relationship to the araucarian cones of fossil and living genera but differs from any known species. The new species is distributed in the Middle Jurassic of the northern hemisphere, especially Asia, and has important significance for the evolution of the Family Araucariaceae.     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

Geologic Characteristics of Gas Reservoirs in West Sichuan Foreland Basin

The foreland basin in West Sichuan is a tectonic unit that has undergone multi-periods tectonic movements of Indosinian-Yanshanian-Himalayan. Since late Triassic, it has been in a passive subsidence environment controlled by basin margin mountain systems and by the compression with abundant sediment sources. With the complex geologic setting, the main geologic characteristics of natural gas reservoir are listed as following:(1)Source rocks are coal-bearing mud and shale series with high to over maturity, and long and progressive hydrocarbon generation-displacement period. The key accumulation period is middle-late Yanshanian epoch.(2)There are three gas-bearing systems vertically, each of which has different reservoir mechanism, main-controlled factors and distribution law, so the exploration thoughts and techniques are also different.(3)Undergoing multi-period generation-migration-accumulation, oil and gas have encountered multi-period modification or destruction, and gas accumulation overpass multiple tectonic periods. So the trap type is complicated and dominated by combination traps. Because the main accumulation period of natural gas is early and the reservoir encountered the modification of strong Himalayan movement, there is great difference in the fullness degree of gas reservoirs and complicated gas-water relation. (4) Reservoir is tight to very tight, but reservoirs of relatively high quality developed under the super tight setting. (5) The key techniques for oil and gas exploration in west Sichuan foreland basin are the prediction of relatively favorable reservoirs, fractures and gas bearing; and the key techniques for oil and gas development are how to improve the penetration rate, reservoir protection and modification.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.     

下庄矿田湖子地区铀矿找矿方向探讨

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.