Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

胶州湾大沽河口洪水期三维水沙数值模拟研究

大沽河是胶州湾最大的入海河流,每年都会给胶州湾带来大量泥沙。本文利用三维的ECOMSED水动力-泥沙数值模型对洪水期的大沽河进行了数值模拟,得到了洪水存在期间以及洪水结束后胶州湾的余流分布、大沽河河道上中下游各层盐度、泥沙浓度随时间变化的趋势以及入海冲淡水和泥沙对胶州湾的影响。     

Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.     

温度和盐度骤变条件下凡纳滨对虾的行为变化研究

以视频记录分析的方法,研究凡纳滨对虾Litopenaeus vannamei在温度和盐度骤变条件下的运动行为、摄食行为及相关生理活动的变化。结果表明,当温度由29℃骤降至18和23℃时,对虾的活动频率、游走速度和颚舟片的摆动频率明显下降,索饵时间显著增加(p<0.05);当温度由29℃骤升至36℃时,对虾的活动频率、游走速度和颚舟片的摆动频率显著升高(p<0.05),索饵时间没有显著差异(p>0.05)。当盐度由30骤降至5和10时,对虾表现出强烈的逃避行为,活动频率、游走速度和颚舟片的摆动频率均显著升高(p<0.05),并且在观察时间内没有发生摄食行为。     

大型海藻对富营养化海湾生物修复的研究进展

近年来,我国诸多海湾富营养化严重,海湾赤潮和大规模的养殖生物病害频繁发生,海湾生态系统严重失衡。海带、裙带菜、紫菜、龙须菜等大型经济海藻,生物量大、生产力高,在生长过程中能大量吸收C、N、P等营养物质,栽培大型海藻是吸收、利用营养物质,防治富营养化的有效措施之一。本文综述了规模化栽培大型海藻对富营养化海湾生物修复的研究进展。     

Wave-Current Forces on Small Square Cylinders (Part I)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.     

Model Test of Sand Restraining Force on Pipeline

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.     

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.     

Dynamic Analysis of a Single-Column Platform (II)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.