Holocene reef sequences and geochemistry, Britomart Reef, central Great Barrier Reef, Australia

Holocene reef development was investigated by coring on Britomart Reef, a mid-shelf reef, 23 km long and 8 km wide situated 120 km north of Townsville in the central Great Barrier Reef (GBR). Two holes were drilled, Britomart 1 on a lagoon patch reef, and Britomart 2 on the windward reef crest. The Holocene reef (25·5 m) is the thickest yet recorded in the GBR and overlies an uneven substrate of weathered Pleistocene limestone. Mineralogical and geochemical analyses show that magnesian calcite and aragonite were converted to low Mg-calcite below the Holocene-Pleistocene disconformity. Corals above the interface have 7500–8500 ppm Sr, but 1650–1500 ppm just below it, decreasing to 400–800 ppm downwards. The intermediate Sr values could be due to partial replacement of aragonite by calcite or higher original Sr content in the corals. Three units are recognized in the Holocene: (1) coral boundstone unit, (2) coral framestone unit, and (3) coral rudstone unit. The coral boundstone unit forms the top 5 m of both cores and is algal-bound coral rubble similar to the present reef top. The coral framestone unit is composed of massive head corals Diploastrea heliopora and Porites sp., and is currently forming in patch reefs situated in the lagoon and along the reef front. The coral rudstone unit comprises coral rudstone and floatstone with unabraded, and unbound, coral clasts in muddy matrix. This matrix may be up to 30% sponge chips. Radiocarbon dating indicates the reef grew more rapidly under the lagoon than under the reef front from 7000 to 5000 yr BP. The rate of reef growth matched existing estimates of sea-level rise, but lagged approximately 1000 years (5–10 m) behind it. Most of the reef mass accumulated between 8500 and 5000 yr BP as a mound of debris, perhaps stabilized by seagrasses or algae. Accretion of the reef top in a windward direction between 5000 and 3000 yr BP created the present, steep reef-front profile.     

Volcanism in the Vitim Volcanic Field, Siberia: Geochemical Evidence for a Mantle Plume Beneath the Baikal Rift Zone

The Baikal Rift is a zone of active lithospheric extension adjacentto the Siberian Craton. The 6–16 Myr old Vitim VolcanicField (VVF) lies approximately 200 km east of the rift axisand consists of 5000 km³ of melanephelinites, basanites, alkaliand tholeiitic basalts, and minor nephelinites. In the volcanicpile, 142 drill core samples were used to study temporal andspatial variations. Variations in major element abundances (e.g.MgO = 3·3–14·6 wt %) reflect polybaric fractionalcrystallization of olivine, clinopyroxene and plagioclase. ⁸⁷Sr/⁸⁶Sr_i(0·7039–0·7049), ¹⁴³Nd/¹⁴⁴Nd_i (0·5127–0·5129)and ¹⁷⁶Hf/¹⁷⁷Hf_i (0·2829–0·2830) ratiosare similar to those for ocean island basalts and suggest thatthe magmas have not assimilated significant amounts of continentalcrust. Variable degrees of partial melting appear to be responsiblefor differences in Na₂O, P₂O₅, K₂O and incompatible trace elementabundances in the most primitive (high-MgO) magmas. Fractionatedheavy rare earth element (HREE) ratios (e.g. [Gd/Lu]_n > 2·5)indicate that the parental magmas of the Vitim lavas were predominantlygenerated within the garnet stability field. Forward major elementand REE inversion models suggest that the tholeiitic and alkalibasalts were generated by decompression melting of a fertileperidotite source within the convecting mantle beneath Vitim.Ba/Sr ratios and negative K anomalies in normalized multi-elementplots suggest that phlogopite was a residual mantle phase duringthe genesis of the nephelinites and basanites. Relatively highlight REE (LREE) abundances in the silica-undersaturated meltsrequire a metasomatically enriched lithospheric mantle source.Results of forward major element modelling suggest that meltingof phlogopite-bearing pyroxenite veins could explain the majorelement composition of these melts. In support of this, pyroxenitexenoliths have been found in the VVF. High Cenozoic mantle potentialtemperatures (1450°C) predicted from geochemical modellingsuggest the presence of a mantle plume beneath the Baikal RiftZone. KEY WORDS: Baikal Rift; mafic magmatism; mantle plume; metasomatism; partial melting     

Glacial drainage towards the Mediterranean during the Middle and Late Pleistocene

To a varying degree the Middle and Late Pleistocene ice sheets in northern Eurasia redirected the drainage of major catchments in Europe and western Siberia from the North Sea and Arctic Ocean south to the Caspian, Black Sea, and ultimately the Mediterranean. During the Late Weichselian, glacial meltwater reached the Mediterranean through the Dniepr and Don catchments and to a minor extent through the Danube. During the Warthe Substage of the Saalian, meltwater from the Volga was most likely added. During the Drenthe Substagc of the Saalian the watershed shifted Par to the east, and meltwater reached the Mediterranean also from the Oh. Irtysh, Yenisei, and Tunguska catchments in Siberia. Depending on the extent of the ice sheets, the increase in freshwater supply during deglaciations resulted in reductions of Mediterranean overflow into the North Atlantic. Such overflow reductions may have reduced vapour transport to the ice sheets and thus accelerated wastage.     

Quantitative Constraints on Metamorphism in the Variscides of Southern Brittany--a Complementary Pseudosection Approach

Previous studies of metapelitic rocks from the core of the southernBrittany metamorphic belt suggest a complex clockwise P–Tevolution. We use pseudosections calculated for an average subaluminousmetapelite composition in the MnNCKFMASH system and averageP–T calculations to investigate in more detail the metamorphicevolution of these rocks. For migmatites, sequential occurrenceof kyanite, kyanite + staurolite and sillimanite suggests thata prograde evolution to P > 8 kbar at T     

Sea level control of stacked late Quaternary coastal sequences, central Great Barrier Reef

Lithofacies analysis, pollen assemblages and radiocarbon age dates of 20 stratigraphic drill holes are used to develop an evolutionary history for late Quaternary sedimentation in two coastal embayments landward of the central Great Barrier Reef. Different physiographic settings of the embayments result in two contrasting styles of sedimentary sequence: (a) an exposed, moderate energy, beach barrier-lagoon system (Wyvuri Embayment) and (b) a protected, low energy, muddy inlet fill sequence (Mutchero Inlet). Despite sharp contrast in sequence style, similar depositional cycles occur in both embayments in response to late Quaternary sea level fluctuations including: (1) a last interglacial highstand (+2 m; c. 125 000 yr bp ) beach barrier (Wyvuri); (2) an early to mid-Holocene (8000–6100 yr bp ) transgressive beach barrier-lagoon (Wyvuri) and estuarine infill (Mutchero); and (3) mid-Holocene to present highstand beach barrier (Wyvuri) and estuarine (Mutchero) progradation. Preservation of such cycles in the stratigraphic record would produce a series of vertically stacked and offset linear barrier sands surrounded by lagoonal mud and fine grained shoreface sediment juxtaposed to muddy, estuarine infills. Sea level elevations are well recorded by the upward transition from Rhizophora-dominated intertidal mangrove mud to freshwater swamp (clearly identified by pollen analysis) and by the basal contacts of beach barrier sediments which sharply overlie the upper shoreface. Transgressive sedimentation is interrupted in both embayments by a constructional beach barrier (Wyvuri) and abbreviated progradation (Mutchero) corresponding to a — 5 m pause in relative sea level rise at c. 6800 yr bp . Sea level control of fine scale coastal sedimentation patterns is beginning to be widely recognized and provides an accurate analogue for stacked ancient sequences.     

Composition and genesis of glacial hummocks, western Wisconsin, USA

Glacial hummocks associated with the Superior Lobe in western Wisconsin are stagnant-ice features composed of melt-out till, meltwater-stream sediment, and flow till. The greater proportion of melt-out till in these hummocks than in hummocks described elsewhere suggests that a model of extensive, supraglacial reworking of supraglacially released debris does not apply to the western Wisconsin hummocks. Interpretation of melt-out till in hummock exposures is based on its strong fabric oriented parallel to regional ice-flow direction. Other features of this melt-out till include poorly developed stratification (color banding and discontinuous thin sandy lenses), and minor faulting, both of which support a melt-out origin. We suggest that as stagnant, debris-rich ice began to melt, supraglacially released debris was deposited as flow till and meltwater-stream sediment (with some debris-flow sediment and lake sediment), but as the thickness of supraglacial debris increased, debris melting out at depth was stabilized, allowing features characteristic of melt-out till to be retained. Because the supraglacial debris was sandy and the stagnant ice was likely at the pressure-melting point, the supraglacial debris was well drained and did not readily fail and flow. Debris volume in the glacier generally was greater at the glacier margin, but lateral and longitudinal variations within this zone were caused by thrusting, freezing-on, or ice-margin fluctuations, which in turn resulted in variations in hummock relief. Ice-walled-lake plains are commonly associated with the hummocks and developed where debris volume was small.     

Controls on low-pressure anatexis

Low-pressure anatexis, whereby rocks melt in place after passing through the andalusite stability field, develops under more restricted conditions than does low-pressure metamorphism. Our thermal modelling and review of published work indicate that the following mechanisms, operating alone, may induce anatexis in typical pelitic rocks without inducing wholesale melting in the lower crust: (i) magmatic advection by pervasive flow; (ii) crustal-scale detachment faulting; and (iii) the presence of a high heat-producing layer. Of these, only magmatic advection by pervasive flow and crustal-scale detachment faulting have been shown quantitatively to provide sufficient heat to cause widespread melting. Combinations of the above mechanisms with pluton-scale magmatic advection, shear heating, removal of the lithospheric mantle, or with each other provide additional means of developing suitable high temperatures at shallow crustal levels to generate low-pressure anatexis.     

LICHENOMETRY ON ADELAIDE ISLAND, ANTARCTIC PENINSULA: SIZE-FREQUENCY STUDIES, GROWTH RATES AND SNOWPATCHES

This paper presents new lichenometric population data from the Antarctic Peninsula (67°S), and describes a new approach to lichen growth-rate calibration in locations where dated surfaces are extremely rare. We use historical aerial photography and field surveys to identify sites of former perennial snowpatches where lichen populations now exist. As an independent check on lichen mortality by snowkill, and the timing of snow patch disappearance, we use a positive-degree day (PDD) approach based on monthly climate data from Rothera Research Station. We find that maximum growth rates for lichens <40 mm in diameter on Adelaide Island are around 0.8 mm/yr. Furthermore, we propose that our combined methodology may be more widely applicable to the Polar Regions where the construction of lichenometric dating (age-size) curves remains a problem.