Geological and seismological evidence of increased explosivity during the 1986 eruptions of Pavlof volcano,Alaska

We present results of study of the best-documented eruptions of Pavlof volcano in historic time. The 1986 eruptions were mostly Strombolian in character; a strong initial phase may have been Vulcanian. The 1986 activity erupted at least 8×10⁶ m³ of feldspar-phyric basaltic andesite lava (SiO₂=53–54%), and a comparable volume of wind-borne tephra. During the course of the eruption, 5300 explosion earthquakes occurred, the largest of which was equivalent to an M _L =2.5 earthquake. Volcanic tremor was recorded for 2600 hours, and the strongest tremor was recorded out to a distance of 160 km and had an amplitude of at least 54 cm² reduced displacement. The 1986 eruptions modified the structure of the vent area for the first time in over two decades. A possible pyroclastic flow was observed on 19 June 1986, the first time such a phenomenon has been observed at the volcano. Overall, the 1986 eruptions were the strongest and longest duration eruptions in historic time, and changed a temporal pattern of activity that had persisted from 1973–1984.     

Reconstruction of the layer anisotropic elastic parameters and high-resolution fracture characterization from P-wave data: a case study using seismic inversion and Bayesian rock physics parameter estimation

Wide-azimuth seismic data can be used to derive anisotropic parameters on the subsurface by observing variation in subsurface seismic response along different azimuths. Layer-based high-resolution estimates of components of the subsurface anisotropic elastic tensor can be reconstructed by using wide-azimuth P-wave data by combining the kinematic information derived from anisotropic velocity analysis with dynamic information obtained from amplitude versus angle and azimuth analysis of wide-azimuth seismic data. Interval P-impedance, S-impedance and anisotropic parameters associated with anisotropic fracture media are being reconstructed using linearized analysis assuming horizontal transverse anisotropy symmetry. In this paper it is shown how additional assumptions, such as the rock model, can be used to reduce the degrees of freedom in the estimation problem and recover all five anisotropic parameters. Because the use of a rock model is needed, the derived elastic parameters are consistent with the rock model and are used to infer fractured rock properties using stochastic rock physics inversion. The inversion is based on stochastic rock physics modelling and maximum a posteriori estimate of both porosity and crack density parameters associated with the observed elastic parameters derived from both velocity and amplitude versus angle and azimuth analysis. While the focus of this study is on the use of P-wave reflection data, we also show how additional information such as shear wave splitting and/or anisotropic well log data can reduce the assumptions needed to derive elastic parameter and rock properties.     

Dipping-interface Mapping Using Mode-separated Rayleigh Waves

Multichannel analysis of surface waves (MASW) method is a non-invasive geophysical technique that uses the dispersive characteristic of Rayleigh waves to estimate a vertical shear (S)-wave velocity profile. A pseudo-2D S-wave velocity section is constructed by aligning 1D S-wave velocity profiles at the midpoint of each receiver spread that are contoured using a spatial interpolation scheme. The horizontal resolution of the section is therefore most influenced by the receiver spread length and the source interval. Based on the assumption that a dipping-layer model can be regarded as stepped flat layers, high-resolution linear Radon transform (LRT) has been proposed to image Rayleigh-wave dispersive energy and separate modes of Rayleigh waves from a multichannel record. With the mode-separation technique, therefore, a dispersion curve that possesses satisfactory accuracy can be calculated using a pair of consecutive traces within a mode-separated shot gather. In this study, using synthetic models containing a dipping layer with a slope of 5, 10, 15, 20, or 30 degrees and a real-world example, we assess the ability of using high-resolution LRT to image and separate fundamental-mode Rayleigh waves from raw surface-wave data and accuracy of dispersion curves generated by a pair of consecutive traces within a mode-separated shot gather. Results of synthetic and real-world examples demonstrate that a dipping interface with a slope smaller than 15 degrees can be successfully mapped by separated fundamental waves using high-resolution LRT.     

High latitude river runoff in a doubled CO2 climate

A global atmospheric model is used to calculate the monthly river flow for nine of the world's major high latitude rivers for the present climate and for a doubled CO₂ climate. The model has a horizontal resolution of 4° × 5°, but the model's runoff from each grid box is quartered and added to the appropriate river drainage basin on a 2° × 2.5° resolution. A routing scheme is used to move runoff from a grid box to its neighboring downstream grid box and ultimately to the mouth of the river. In a model simulation in which atmospheric carbon dioxide is doubled, mean annual precipitation and river flow increase for all of these rivers, increased outflow at the river mouths begins earlier in the spring, and the maximum outflow occurs approximately one month sooner due to an earlier snow melt season. In the doubled CO₂ climate, snow mass decreases for the Yukon and Mackenzie rivers in North America and for rivers in northwestern Asia, but snow mass increases for rivers in northeastern Asia.     

Relations between metamorphism and orogeny in a typical section of the Indian Himalayas

Summary A comprehensive geological and petrological investigation has been undertaken in an area of about 10 000 km² in the Indian Himalaya (S-Lahul, Himachal Pradesh). The development of mineral assemblages in metamorphic rocks of medium grade is considered to be a dominant Alpine event, although almost exclusively Paleozoic and Precambrian rocks have been involved. The Barrowian type of this metamorphism, ranging from the anchi- to the sillimanite zone, took place under the elavated T-gradient of about 4°C/100 m. It is suggested that normal geothermal conditions prevailed only in the outermost zone of this orogenic belt. In the Late Tertiary this metamorphic series has been moved as a huge nappe upon the Lower Himalaya. During this process a unique feature of reverse metamorphism has been formed. It can be shown that this feature was caused by a combination of metamorphism and very rapid tectonic movements.

---

Beziehungen zwischen Metamorphose und Orogenese in einem typischen Querschnitt des Indischen Himalaya

Zusammenfassung Ein etwa 10 000 km² großes Gebiet des Indischen Himalaya (S-Lahul, Himachal Pradesh) wurde einer umfassenden geologischen und petrographischen Bearbeitung unterzogen. Die Ausbildung der in den mittelgradig metamorphen Gesteinen vorliegenden Mineralparagenesen wird als ein dominant alpines Ereignis betrachtet, obwohl fast nur paläozoische und präkambrische Gesteine einbezogen wurden. Die Metamorphose selbst ist von Barrow-Typus und reicht von der Anchi- bis zur Sillimanitzone. Sie fand unter einem erhöhten Temperaturgradienten von etwa 4°C/100 m statt. Nur in der äußersten Zone des Orogens entsprach der Gradient etwa normalen geothermischen Verhältnissen. Im Spättertiär wurde diese alpin-metamorphe Serie in Form einer mächtigen Kristallindecke dem Niedrigen Himalaya aufgeschoben. Dabei wurde eine einzigartige Zone inverser Metamorphose ausgebildet. Es konnte gezeigt werden, daß diese inverse Metamorphose durch das Zusammenwirken von Metamorphose und sehr rasch ablaufender Tektonik entstand.

---

---

With 13 Figures

---

Dedicated to Prof. Dr. Dr. h. c.B. Sander on the occasion of his 90th birthday.     

Late Quaternary glacial and climatic history of northern Cumberland Peninsula,Baffin Island,N.W.T., Canada

Radiocarbon dates on molluses in marine facies associated with glacial deposits in northern Cumberland Peninsula indicate both main fiord (Laurentide) ice and local glaciers remained at their late Wisconsin maxima until ca. 8000 BP. Essentially continuous deglaciation followed; local corrie glaciers melted out by 7100 BP and by 5500 BP fiord glaciers had receded behind the present margin of the Penny Ice Cap. The Hypsithermal warm interval probably lasted from ca. 8000 to 5000 BP. Lichenometry and radiocarbon dates on peat and buried organic horizons delimit a detailed Neoglacial chronology. Of 46 outlet and corrie glaciers investigated, the oldest Neoglacial moraines are dated lichenometrically at 3200 ± 600 BP. Subsequent advances terminated immediately prior to ca. 1650, 780, 350, and 65 yr BP, the most recent of which marked the most extensive ice coverage during the Neoglacial. The highest occurrence of lateral moraines from late Wisconsin advances of local and Laurentide ice suggest that at the late Wisconsin glacial maximum, depression of snowline varied from 450 m below present at the coast to 350 m below present level in the vicinity of the Penny Ice Cap. Moraines, surrounded by glacial ice and lying above the present steady-state ELA, suggest that during the Hypsithermal snowline was up to ca. 200 m above its present elevation. A radiometrically controlled reconstruction of relative summer paleotemperatures for the postglacial derived independently of lichenometry agrees well with the lichenometric age dating of moraines. The data suggest that between ca. 1650 and 900 BP climatic conditions were unfavorable for glacier growth, whereas the period ca. 800-65 yr BP was one of general glacial activity. During the last decade permanent snow cover has been increasing in the area. Previously reported data on climatic trends in the Canadian Arctic based on palynological analyses are similar to the chronology reported here.     

Assessment of channel dynamics,in-stream structures and post-project channel adjustments in North Carolina and its implications to effective stream restoration

Site assessment and monitoring data were analyzed for 26 stream restoration projects in North Carolina where the channel was reconfigured. Post-project changes in channel capacity were highly variable from site to site, but more than 60% of the projects underwent, on average at a given site, at least a 20% change in channel capacity. An analysis of site and basin geomorphology revealed that large post-construction adjustments were associated with highly dynamic stream channels characterized by a combination of high sediment transport capacity, large sediment supply, and/or easily eroded bank materials. In-stream structures along dynamic, reconfigured channels also exhibited high incidences of damage. Thus, the design and construction of channels in a state of equilibrium, which do not exhibit excessive erosion or deposition along highly dynamic rivers is currently problematic. In light of these findings, a conceptual framework based on geomorphic parameters is put forth to assess the likelihood of project success early in the design process to (1) eliminate high risk sites from consideration of channel reconfiguration and (2) improve upon the implemented management strategies that are ultimately used. It is also argued that where space permits an enhanced natural channel, adjustment approach is likely to be more effective than projects based on natural channel design.     

华北克拉通南缘中条山-嵩山地区1.78Ga基性岩墙群的地球化学特征及构造环境

幔源岩浆侵位产生的基性岩墙群是地壳伸展裂解的重要标志。华北克拉通南缘中条山-嵩山地区出露有大量的中元古代基性岩墙群,对其研究将有助于深入了解华北克拉通中元古代构造演化特征。其岩石类型以辉绿岩为主,少量辉长辉绿岩和辉绿玢岩;主要造岩矿物为斜长石和单斜辉石,其它矿物包括角闪石、Fe-Ti氧化物、磷灰石、黑云母、碱性长石和石英。锆石SHRIMPU-Pb年龄为1785±18Ma,代表岩墙的结晶年龄。岩石K2O+Na2O含量为3.63%～6.18%,K2O/Na2O比值为0.73～1.38,FeOT含量较高(10.03%～13.59%),属于拉斑玄武岩系列。岩石的稀土元素含量高(142×10-6～381×10-6),亏损Nb、Ta、Zr、Hf等高场强元素,富集Rb、Ba、La等大离子亲石元素,全岩εNd(t)值为-6.2～-8.1。岩墙的固结指数(SI)和MgO含量呈明显的正相关关系,说明幔源岩浆发生过明显的结晶分异作用。地球化学分析表明,研究区基性岩墙属于板内拉斑玄武岩系列,与熊耳群火山岩有相似的地球化学特征;基于两者紧密的产出关系,我们认为该区岩墙可能是熊耳群火山岩的通道岩墙,共同代表了华北克拉通东、西陆块碰撞后伸展事件。