Sorption model for dissolved and particulate aluminium in the Conway estuary, UK

Dissolved Al carried in river water apparently undergoes a fractional removal at the early stages of mixing in the Conway estuary. On the other hand, dissolved Al behaves almost conservatively in high salinity (>13) estuarine waters. In order to understand the geochemistry of Al in these estuarine waters, simple empirical sorption models have been used. Partitioning of Al occurs between solid and solution phases with a distribution coefficient, K_d, which varies from 0.67 × 10⁵ to 3.38 × 10⁶ ml g⁻¹ for suspended particle concentrations of 2–64 mg l⁻¹. The K_d values in general decrease with increasing suspended particulate matter and this tendency termed the “particle concentration effect” is quite pronounced in these waters. The sorption model derived by previous workers for predicting concentrations of dissolved Al with changing suspended sediment loads has been applied to these data. Reasonable fits are obtained for K_d values of 10⁵, 10⁶ and 10⁷ ml g⁻¹ with various values of α. Further, a sorption model is proposed for particulate Al concentrations in these waters that fits the data extremely well defined by a zone with K_d value 10⁷ ml g⁻¹ and C₀ values 16 × 10⁻⁶ mg ml⁻¹ and 92 × 10⁻⁶ mg ml⁻¹. These observations provide strong evidence of sorption processes as key mechanisms influencing the distribution of dissolved and particulate Al in the Conway estuary and present new insight into Al geochemistry in estuaries.     

Seasonal variability in the recruitment of macrofouling community in Kudankulam waters, east coast of India

The seasonal variability in fouling community recruitment on submerged artificial substratum was studied in Kudankulam coastal water, Gulf of Mannar, East coast of India for a period of two years, from May 2003 to April 2005. The results indicated that the fouling community recruitment occurred throughout the year with varying intensities. Barnacles, ascidians, polychaetes, bivalves and seaweeds were the major fouling groups observed from the test panels. Maximum fouling biomass of 9.17 g dm⁻² was observed during August 2004 and a minimum value of 0.233 g dm⁻² in February 2004. The biomass build-up on test panels was relatively high during the premonsoon season and low during the postmonsoon months. The number of barnacles settled on the panels varied from 1 to 4460 no. dm⁻². The maximum percentage of the ascidian coverage (72%) on test panels was observed during March 2005. In general, July–December was the period of intense recruitment for barnacles and March–May was the period for ascidians.     

Large-scale dune erosion tests to study the influence of wave periods

Large-scale physical model tests were performed to quantify the effects of the wave period on dune erosion. Attention was focussed on 2D cross-shore effects in a situation with sandy dunes and extreme water levels and wave conditions. Besides profile measurements, detailed measurements in time and space of water pressure, flow velocities and sediment concentrations were performed in the near near-shore area. It was concluded that a longer wave period leads to a larger dune erosion volume and to a larger landward retreat of the dune face. Tests with double-peaked wave spectra showed that the influence of the spectral shape on dune erosion was best represented by the T_m − 1,0 spectral mean wave period, better than the peak wave period, T_p. The effect of the wave period on dune erosion was implemented in a dune erosion prediction method that estimates erosion volumes during normative storm conditions for the Dutch coast. More details of the measurements and additional analyses of physical processes are described in an accompanying paper by Van Thiel de Vries et al. [Van Thiel de Vries, J.S.M., van Gent, M.R.A., Reniers, A.J.H.M. and Walstra, D.J.R., submitted for publication. Analysis of dune erosion processes in large scale flume experiments, In this volume of Coastal Engineering.].     

Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 1: Numerical modelling

The boundary-element method has been widely used as a design tool in the offshore and ship building industry for more than 30 years. Its application to wave energy conversion is, however, more recent. This paper deals with the numerical modelling of a free-floating sloped wave energy device. The power take-off mechanism of the device consists of an immersed tube with a piston sliding inside. The modelling is done using the boundary-element method package WAMIT. The model is first worked out for the case where the axis of the tube is vertical. It is then derived for the tube inclined and successfully verified against numerical benchmark data. A companion paper presents results of a detailed comparison with a physical model study.     

Comparison of flow patterns in the near wake of a circular cylinder and a square cylinder placed near a plane wall

The flow patterns in the near wake of a cylinder (either circular or square in shape, D=25 mm) placed in the proximity of a fully developed turbulent boundary layer (thickness δ=0.4D) are investigated experimentally using particle image velocimetry (PIV). The effects of changing the gap height (S) between the cylinder bottom and the wall surface, over the gap ratio range S/D=0.1–1.0, have been investigated. The results show that both the ensemble-averaged and instantaneous flow fields are strongly dependent on S/D. The flow patterns for the two types of cylinders share many similarities with respect to the change in S/D, such as the reduced recirculation length and increased velocity fluctuation in the near wake with increasing S/D, as well as the trend of suppression of vortex shedding at small S/D and onset of vortex shedding at large S/D. However, developments of the shear layers, in terms of wake width, flow curvature, etc., are considerably different for these two types of cylinders. In general, the wake development and momentum exchange for the square cylinder are slower those for the circular cylinder at the same gap ratio. Correspondingly, it is shown that the periodic vortex shedding is delayed and weakened in the case of square cylinder, as compared to that of the circular cylinder at the same S/D.     

Seasonal changes in submarine groundwater discharge to coastal salt ponds estimated using Ra and Ra as tracers

Submarine groundwater discharge (SGD) to coastal southern Rhode Island was estimated from measurements of the naturally-occurring radioisotopes ²²⁶Ra (t_1/2 = 1600 y) and ²²⁸Ra (t_1/2 = 5.75 y). Surface water and porewater samples were collected quarterly in Winnapaug, Quonochontaug, Ninigret, Green Hill, and Pt. Judith–Potter Ponds, as well as nearly monthly in the surface water of Rhode Island Sound, from January 2002 to August 2003; additional porewater samples were collected in August 2005. Surface water activities ranged from 12–83 dpm 100 L^− 1 (60 dpm = 1 Bq) and 21–256 dpm 100 L^− 1 for ²²⁶Ra and ²²⁸Ra, respectively. Porewater ²²⁶Ra activities ranged from 16–736 dpm 100 L^− 1 (2002–2003) and 95–815 dpm 100 L^− 1 (2005), while porewater ²²⁸Ra activities ranged from 23–1265 dpm 100 L^− 1. Combining these data with a simple box model provided average ²²⁶Ra-based submarine groundwater fluxes ranging from 11–159 L m^− 2 d^− 1 and average ²²⁸Ra-derived fluxes of 15–259 L m^− 2 d^− 1. Seasonal changes in Ra-derived SGD were apparent in all ponds as well as between ponds, with SGD values of 30–472 L m^− 2 d^− 1 (Winnapaug Pond), 6–20 L m^− 2 d^− 1 (Quonochontaug Pond), 36–273 L m^− 2 d^− 1 (Ninigret Pond), 29–76 L m^− 2 d^− 1 (Green Hill Pond), and 19–83 L m^− 2 d^− 1 (Pt. Judith–Potter Pond). These Ra-derived fluxes are up to two orders of magnitude higher than results predicted by a numerical model of groundwater flow, estimates of aquifer recharge for the study period, and values published in previous Ra-based SGD studies in Rhode Island. This disparity may result from differences in the type of flow (recirculated seawater versus fresh groundwater) determined using each technique, as well as variability in porewater Ra activity.     

Long‐term temporal and spatial patterns in bioeroding sponge distribution at the Abrolhos Bank,Brazil, Southwestern Atlantic

Bioeroding sponges belong to the most dominant bioeroders, significantly contributing to the erosion of coral reefs. Some species are tolerant or even benefit from environmental conditions such as ocean warming, acidification, and eutrophication. In consequence, increases in sponge bioerosion have been observed on some coral reefs over the last decades. The Abrolhos Bank is the largest coral reef system in the South Atlantic. It has been affected by sedimentation, eutrophication, overfishing, and climate change, mainly affecting coastal reefs, and at lesser intensity outer ones as well. This study aimed to describe spatial and temporal patterns in bioeroding sponge distribution in carbonate substrates in the Abrolhos Bank. Photo‐quadrats were used to compare bioeroding sponge abundance between two shallow reefs: a coastal, Pedra de Leste (PL), and an outer reef, Parcel dos Abrolhos (PAB). Each individual was delimitated over the substrate by determining the sponge surface through a line connecting the outermost papillae. The study was conducted over 6 years in 2008–2009 and 2013–2016. Four species of bioeroding sponges were identified: Cliona carteri Ridley, 1881, C. delitrix Pang, 1973, C. cf. schmidtii Ridley, 1881, and Siphonodictyon coralliphagum Rützler, 1971. The distribution and abundance of species varied between the inner and outer reefs and across the years, and displayed certain selectivity for the calcareous substrates recorded. Crustose coralline algae (CCA) were the main substrate excavated by the most abundant bioeroding species, C. carteri, and represented 70% of the substrate types occupied by this sponge (CCA, coral overgrown by CCA and plain coral). The highest abundance of bioeroding sponges observed in photo‐quadrats was 21.3 individuals/m² at the outer reefs (PAB) in 2014. The abundances or areal extents of bioeroding sponges were up to 10 times greater on the outer reefs than on the coastal ones, where sedimentation is higher and more strongly influenced by siliciclastic material. Moreover, a higher herbivorous fish biomass has been reported on outer reefs which could also influence the higher abundance of bioeroding sponges in outer reefs. During the study period of 6 years, an increase in bioeroding sponge abundance was observed at the outer reefs (PAB), with the sea surface temperature increase. As CCA have an important role in reefal cementation and carbonate production in the Abrolhos reefs, a bioerosion impact might be expected, in particular, on the outer reefs.     

Habitat continuity effects on gradients of fish biomass across marine protected area boundaries

Marine protected areas (MPAs) could be useful as fisheries management tools for the exportation of pelagic eggs, larvae and adult fish. A decreasing gradient of fish biomass across MPAs boundary may indicate export. We determine whether gradients of decreasing biomass of fish assemblage occurred in Tabarca Marine Reserve over two habitats with different continuity across the boundaries, to test if the patchy nature of the marine environment might act as a barrier for the fish export. In general, significant decreasing gradients in total fish biomass and biomass of some species were observed on P. oceanica and rocky substrates, independently of their different continuity through the reserve boundaries. Changes in the multivariate structure of the fish assemblage were correlated with the distance from integral reserve. All of these results support the hypothesis that the exportation of adult fish from Tabarca Marine Reserve occurs, and this process may influence the surrounding fished areas.     

Influx of Streaming Methane into Anoxic Waters of the Black Sea Basin

Oceanology - Based on long-term data on the spatial distribution and fluxes of streaming (bubbling) methane in the Black Sea, the study considers various types of streaming gas emissions...     

Dispersed Sedimentary Matter of the Barents Sea

Oceanology - The article presents the results of studying the distribution and composition of dispersed sedimentary matter (suspended particulate matter, SPM) in the Barents Sea water column. The...