Bayesian algorithm for the estimation of the dielectric constant from active and passive remotely sensed data

An inversion technique based on the merging of microwave remotely sensed data is applied to ground-based radiometer and scatterometer data acquired for the same area. The purpose of this technique is to retrieve the dielectric constant of bare soils. The algorithm is based on a Bayesian approach and combines prior information on the dielectric constant and surface roughness with observed data, in order to obtain a marginal posterior probability density function. The function describes how the probability is distributed within the range of the dielectric constant values, given the measured values of emissivity and backscattering coefficient. The algorithm allows for the incorporation of all the available sources of information, such as multipolarization and multifrequency data. Several criteria, which have been used to compare the predicted and the observed values, show that for dielectric constant values higher than 10 the best performance is achieved when data with one polarization and one or two frequencies are exploited. For dielectric constant values of less than 10, the configuration with two polarizations produces the best estimates.     

A model for adjustment of differential gravity measurements with simultaneous gravimeter calibration

 A mathematical model is proposed for adjustment of differential or relative gravity measurements, involving simultaneously instrumental readings, coefficients of the calibration function, and gravity values of selected base stations. Tests were performed with LaCoste and Romberg model G gravimeter measurements for a set of base stations located along a north–south line with 1750 mGal gravity range. This line was linked to nine control stations, where absolute gravity values had been determined by the free-fall method, with an accuracy better than 10 μGal. The model shows good consistence and stability. Results show the possibility of improving the calibration functions of gravimeters, as well as a better estimation of the gravity values, due to the flexibility admitted to the values of the calibration coefficients. Received: 15 November 1999 / Accepted: 31 October 2000     

柴北缘鱼卡地区中侏罗统石门沟组含煤层段沉积有机相分析

柴达木盆地北缘鱼卡地区中侏罗统石门沟组含煤段中发育有油页岩、煤、碳质泥岩和泥岩等富有机质细粒沉积.为了研究其沉积有机相的类型及煤和油页岩形成的控制因素,本文通过岩心观察、工业分析结合有机地球化学测试分析等方法将含煤段细粒沉积物划分为了类型A(三角洲平原沉积环境)、B(三角洲前缘-浅湖沉积环境)、C1(湖沼非油页岩亚相)及C2(湖沼油页岩亚相)四种类型,其中类型C1沉积物中发育煤,类型C2中发育油页岩,且煤较油页岩具有更高的含油率、水分、挥发分以及发热量值.有机质类型特征方面,沉积有机相类型A、B及C1沉积物有机质类型均为Ⅱ2-Ⅲ型、有机质来源均以陆源和混合来源两种有机质来源为主,而类型C2中主要为Ⅱ2型,以混合有机质来源为主;类型A及C2其沉积物有机质均处于未成熟阶段,而类型B和C1中有机质均处于未成熟-低成熟阶段;有机质保存条件方面,类型A沉积物主要形成于缺氧的淡水环境,类型B主要形成于贫氧-缺氧的淡水-半咸水环境,类型C1形成于贫氧-缺氧的淡水-半咸水环境,而类型C2则主要形成于缺氧的淡水-半咸水环境.其中类型B较类型A,类型C2较类型C1,其沉积物均形成于更为还原且盐度更高的水体环境中.石门沟组含煤段是煤和油页岩的形成层位,稳定的沉积环境、丰富的湖泊有机质来源、良好的保存条件及较少的陆源碎屑的稀释共同促进了类型C2中油页岩的形成,而丰富的陆源植物供给及良好的保存条件则促进了类型C1中煤层的形成.     

Neutron stars in the multidimensional einstein theory of gravitation

The radius, mass, total number of baryons, and other parameters of static, spherically symmetric, superdense stars are calculated. A model with one Ricci-flat inner space of arbitrary dimensionality and the approximation p₁=?0.5ε + ap for additional components of the energy — momentum tensor are used (ε and ρ are the total energy density and the pressure of the stellar matter and a is a fitting parameter). In the case of white dwarfs, the results of the multidimensional theory do not depend on the dimensionality D of space-time for ?10 ? a ? 10 and coincide with the analogous data of the general theory of relativity (GTR). For neutron stars there is a dependence on D and a. For D>4, in particular, the greatest mass M_max of a neutron star as a function of a has a maximum at 3<a(D) ? 4, which exceeds the greatest mass M _max ⁰ =2.14 M_⊙ in the GTR. A comparison of theoretical results with observational data determines the allowable values of a. Data for PSR 1913 + 16 lead to 0.2 ≤ a ≤ 9.2 in the case of D=26, while the results of [P. C. Joss and S. A. Rappaport, Annu. Rev. Astron. Astrophys.,22, 537 (1984)] lead to the stricter limits 1 ≤ a ≤ 7.4.     

Martian water vapor: Mars Express PFS/LW observations

We present the seasonal and geographical variations of the martian water vapor monitored from the Planetary Fourier Spectrometer Long Wavelength Channel aboard the Mars Express spacecraft. Our dataset covers one martian year (end of Mars Year 26, Mars Year 27), but the seasonal coverage is far from complete. The seasonal and latitudinal behavior of the water vapor is globally consistent with previous datasets, Viking Orbiter Mars Atmospheric Water Detectors (MAWD) and Mars Global Surveyor Thermal Emission Spectrometer (MGS/TES), and with simultaneous results obtained from other Mars Express instruments, OMEGA and SPICAM. However, our absolute water columns are lower and higher by a factor of 1.5 than the values obtained by TES and SPICAM, respectively. In particular, we retrieve a Northern midsummer maximum of 60 pr-μm, lower than the 100-pr-μm observed by TES. The geographical distribution of water exhibits two local maxima at low latitudes, located over Tharsis and Arabia. Global Climate Model (GCM) simulations suggest that these local enhancements are controlled by atmospheric dynamics. During Northern spring, we observe a bulge of water vapor over the seasonal polar cap edge, consistent with the northward transport of water from the retreating seasonal cap to the permanent polar cap. In terms of vertical distribution, we find that the water volume mixing ratio over the large volcanos remains constant with the surface altitude within a factor of two. However, on the whole dataset we find that the water column, normalized to a fixed pressure, is anti-correlated with the surface pressure, indicating a vertical distribution intermediate between control by atmospheric saturation and confinement to a surface layer. This anti-correlation is not reproduced by GCM simulations of the water cycle, which do not include exchange between atmospheric and subsurface water. This situation suggests a possible role for regolith-atmosphere exchange in the martian water cycle.     

Acid mine drainage at Cerro Rico de Potosí I: unabated high-strength discharges reflect a five century legacy of mining

Intensive mining and processing of Ag, Sn, Pb and Zn ores have occurred in various locations within and around the city of Potosí, Bolivia since 1545. Surface and subsurface waters, stream sediments and soils are contaminated with various ecotoxic metals in the headwaters of the economically vital, yet highly impacted, upper Rio Pilcomayo watershed. Previous studies have documented downstream trace metal contamination, however, not addressed specific sources. The AMD discharges identified in this study help link downstream pollution to primary origins. The majority of AMD would be considered high-strength due to metal concentrations and acidity orders of magnitude greater than typical AMD. Discharges from both operating and abandoned portals as well as tailings-related deposits displayed a high degree of heterogeneity with total metal concentrations ranging from 0.11 to 7480, <0.022 to 889, <0.0006 to 65.3, <0.001 to 310, 0.12 to 72,100, 0.3 to 402, <0.012 to 34.8, and 0.24 to 19,600 mg/L of Al, As, Cd, Cu, Fe, Mn, Pb and Zn, respectively. Net acidity and pH ranged from −10 to 246,000 mg/L as CaCO₃ equivalent and 0.90–6.94 standard units, respectively. Data were gathered during two sampling events centered around the most extreme periods of the dry and wet seasons of one water-year. Loadings to local streams were marginally greater for most metals in the wet season. If observed loadings are historically representative, Cerro Rico AMD has contributed thousands of tonnes of ecotoxic metals to the upper Rio Pilcomayo over the last five centuries. Metal and hydrogen ion concentrations in the majority of AMD sampled were several orders of magnitude above discharge limits set by the Bolivian government, yet no action has historically or contemporarily been taken.     

Diurnal Variation of Gravity Wave Activity at Midlatitudes in the Ionospheric F Region

We investigate the short-term fluctuations in the period range from 15 to 180 minutes in the electron density variations of the F region ionosphere. Electron density profiles obtained at the ionospheric stations of Pruhonice (49.9° N, 14.5° E) and Ebro (40.8° N, 0.5° E) at five minute time sampling have been used for this analysis. The diurnal changes of the activity of the acoustic gravity wave fluctuations (AGW) show a clear enhancement during and several hours after sunrise. The periods of such AGW's are about 60 to 75 minutes and these waves propagates vertically through the ionosphere from a source located at an altitude of 180-220 km. The most likely source for these events seems to be passage of the Solar terminator.     

Constraints on the flux of meteoritic and cometary water on the Moon from volatile element (N–Ar) analyses of single lunar soil grains,Luna 24 core

We report new nitrogen and argon isotope and abundance results for single breccia clasts and agglutinates from four different sections of the Luna 24 drill core in order to re-evaluate the provenance of N trapped in lunar regolith, and to place limits on the flux of planetary material to the Moon’s surface. Single Luna 24 grains with ⁴⁰Ar/³⁶Ar ratios <1 show δ¹⁵N values between ?54.5‰ and +123.3‰ relative to terrestrial atmosphere. Thus, low-antiquity lunar soils record both positive and negative δ¹⁵N signatures, and the secular increase of the δ¹⁵N value previously postulated by Kerridge (Kerridge, J.F. [1975]. Science 188(4184), 162–164. doi:10.1126/science.188.4184.162) is no longer apparent when the Luna and Apollo data are combined. Instead, the N isotope signatures, corrected for cosmogenic ¹⁵N, are consistent with binary mixing between isotopically light solar wind (SW) N and a planetary N component with a δ¹⁵N value of +100‰ to +160‰. The lower δ¹⁵N values of Luna 24 grains compared to Apollo samples reflect a higher relative proportion of solar N, resulting from the higher SW fluence in the region of Mare Crisium compared to the central near side of the Moon. Carbonaceous chondrite-like micro-impactors match well the required isotope characteristics of the non-solar N component trapped in low-antiquity lunar regolith. In contrast, a possible cometary contribution to the non-solar N flux is constrained to be ?3–13%. Based on the mixing ratio of SW to planetary N obtained for recently exposed lunar soils, we estimate the flux of micro-impactors to be (2.2–5.7) × 10³ tons yr^?1 at the surface of the Moon. Our estimate for Luna 24 agrees well with that for young Apollo regolith, indicating that the supply of planetary material does not depend on lunar location. Thus, the continuous influx of water-bearing cosmic dust may have represented an important source of water for the lunar surface over the past ～1 Ga, provided that water removal rates (i.e., by meteorite impacts, photodissociation, and sputtering) do not exceed accumulation rates.     

Classifying zones of suitability for manual drilling using textural and hydraulic parameters of shallow aquifers: a case study in northwestern Senegal

A method is proposed that uses analysis of borehole stratigraphic logs for the characterization of shallow aquifers and for the assessment of areas suitable for manual drilling. The model is based on available borehole-log parameters: depth to hard rock, depth to water, thickness of laterite and hydraulic transmissivity of the shallow aquifer. The model is applied to a study area in northwestern Senegal. A dataset of boreholes logs has been processed using a software package (TANGAFRIC) developed during the research. After a manual procedure to assign a standard category describing the lithological characteristics, the next step is the automated extraction of different textural parameters and the estimation of hydraulic conductivity using reference values available in the literature. The hydraulic conductivity values estimated from stratigraphic data have been partially validated, by comparing them with measured values from a series of pumping tests carried out in large-diameter wells. The results show that this method is able to produce a reliable interpretation of the shallow hydrogeological context using information generally available in the region. The research contributes to improving the identification of areas where conditions are suitable for manual drilling. This is achieved by applying the described method, based on a structured and semi-quantitative approach, to classify the zones of suitability for given manual drilling techniques using data available in most African countries. Ultimately, this work will support proposed international programs aimed at promoting low-cost water supply in Africa and enhancing access to safe drinking water for the population.