Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

冲绳海槽南部沉积层序的粒度特征

对取自冲绳海槽南部的A2 3孔经前处理后的沉积物样品进行了粒度测试,探讨了陆源沉积层序的粒度特征。沉积物平均粒径、分选系数、偏态、峰态等粒度参数的变化显示出A2 3孔的沉积层序以 4 0 0cm为界可分为上、下两段,下段各参数稳定,代表了比较稳定的水动力条件的沉积环境;上段则波动较大,小规模浊流沉积频繁发育,暗示了不稳定的沉积环境。浊流层内粗粒与细粒组分含量及粒度分布的变化具有明显的规律性。通过分析A2 3孔陆源沉积层序的各沉积参数特征,认为冲绳海槽南部的沉积环境和动力在时间尺度上有较大的变化,东海陆架物质向南部海槽的输运可能是以峡谷为通道的重力作用引起的床底沉积作用为主。另外,对陆源碎屑和全样粒度结果的对比,显示了前处理方法对于海洋沉积物粒度分析的重要性.     

Gravity variation before Kunlun mountain pass western Ms=8.1 earthquake

The relation between the gravity variation features and Ms=8.1 earthquake in Qinghai-Xizang monitoring area is analyzed preliminarily,by using spatial dynamic variation results of regional gravity field from absolute gravity and relative gravity observation in 1998 and 2000.The results show that:1)Ms\8.1 earthquake in Kulun mountain pass westem occurred in the gravity variation high gradient near gravity‘s high negative variation;2)The Main tectonic deformation and emnergy accumulation before MS=8.1 earthquake are distributed at south side of the epicenter;3)The range of gravity‘s high negative variation at east of the MS=8.1 earthquake epicenter relatively coincides with that rupture region according to field geology investigation;4)Gravity variation distribution in high negative value region is just consistent with the second shear strain‘s high value region of strain field obtained from GPS observation.     

CDP mapping in tilted transversely isotropic (TTI) media. Part I: Method and effectiveness

Transverse isotropy with a tilted axis of symmetry (TTI) causes image distortion if isotropic models are assumed during data processing. A simple anisotropic migration approach needs long computational times and is sensitive to the signal-to-noise ratio. This paper presents an efficient, general approach to common-depth-point (CDP) mapping to image the subsurface in TTI media from qP-wave seismic data by adding anisotropic and dip parameters to the velocity model. The method consists of three steps: (i) calculating traveltimes and positions of the CDP points; (ii) determining CDP trajectories; (iii) CDP imaging. A crucial step is the rapid computation of traveltimes and raypaths in the TTI media, which is achieved by the Fermat method, specially adapted for anisotropic layered media. The algorithm can image the subsurface of a given model quickly and accurately, and is suitable for application to a bending reflector. The effectiveness of the method is demonstrated by comparing the raypaths, the traveltimes and the results of CDP mapping, when assuming isotropic media, transversely isotropic media with a vertical axis of symmetry (TIV), and TTI media.     

Absence of Archean basement in the South Kunlun Block: Nd-Sr-O isotopic evidence from granitoids

Abstract   The West Kunlun mountain range along the northwestern margin of the Tibetan Plateau is crucial in understanding the early tectonic history of the region. It can be divided into the North and South Kunlun Blocks, of which the former is considered to be part of the Tarim Craton, whereas consensus was not reached on the nature and origin of the South Kunlun Block. Samples were collected from the 471 Ma Yirba Pluton, the 405 Ma North Kudi Pluton and the 214 Ma Arkarz Shan Intrusive Complex. These granitoids cover approximately 60% of the Kudi area in the South Kunlun Block. Sr, Nd, and O isotope compositions preclude significant involvement of mantle-derived magma in the genesis of these granitoids; therefore, they can be used to decipher the nature of lower–mid crust in the area. All samples give Mesoproterozoic Nd model ages (1.1–1.5 Ga) similar to those of the exposed metamorphic complex of this block but significantly different from those of the basement of the North Kunlun Block (2.8 Ga). This indicates that the South Kunlun Block does not have an Archean basement, and, thus, does not support the microcontinent model that suggests the South Kunlun Block was a microcontinent once separated from and later collided back with the North Kunlun Block.     

SHRIMP U-Pb zircon age,geochemistry and Nd isotope of the Guandaoshan pluton in SW Sichuan: Petrogenesis and tectonic significance

SHRIMP U-Pb zircon age, geochemical and Nd isotopic data are reported for the Neo-proterozoic Guandaoshan pluton in the Yanbian region, SW Sichuan. This pluton is of typical I-type granite and emplaced at (857 ± 13) Ma. Geochemical and Nd isotopic characters suggest that the pluton was generated by partial melting of pre-existing, young (late Mesoproterozoic to early Neo-proterozoic) low-K tholeiitic protolith within an intraplate anorogenic setting. The Guandaoshan pluton probably records the earliest magmatism induced by the proposed ca. 860–750 Ma mantle superplume beneath the supercontinent Rodinia.     

辽宁义县—北票地区义县组地层层序——义县阶标准地层剖面建立和研究之一

义县地区广义的义县组可解体为王家屯组 (暂命名 )和义县组 ;分属王家屯和义县火山旋回 ,前者为偏酸、偏碱性 ,后者主体为中基性、末期为中酸性火山岩系 ,并广泛发育潜火山岩相的玄武玢岩、安山玢岩和火山集块角砾熔岩筒。该区有七个主要沉积层 ,自下而上分别为王家屯组马神庙层、义县组老公沟层、业南沟层、砖城子层、大康堡层、朱家沟层和金刚山层 ;产有较丰富的无脊椎动物、脊椎动物和植物化石。以砖城子层、大康堡层和金刚山层为界 ,义县火山旋回可划分为 4个亚旋回 ,分别代表火山活动的初始期、主期、晚期和末期。北票四合屯地区的义县组相当义县地区义县组的第一和第二亚旋回 ,含鸟类化石的主沉积层 (尖山沟层和上园层 )可与砖城子层对比     

黄骅坳陷中北区沙河街组四段上亚段地层的确认

以往黄骅坳陷仅在南区的王官屯地区发现过确切的古近系沙河街组四段地层。上世纪 90年代初 ,地层古生物工作者曾根据个别单井孢粉化石资料 ,怀疑黄骅坳陷北区的北塘凹陷局部分布有沙四段。但由于当时的勘探程度较低 ,化石证据不足 ,因而没有得到广泛认可。中区板桥和歧口凹陷过去从未发现沙四段。通过对板桥凹陷地层的系统古生物分析 ,发现中北区沙三段下伏原来部分归属中生界的地层中含大量的藻类、介形虫、腹足类及轮藻化石 ,依据它们的生物群特征 ,这套地层应属于沙河街组四段 ,且为沙四段上亚段。     

岳西菖蒲地区超高压变质带内的构造地层序列与叠加褶皱型式

以大别造山带南部菖蒲地区为解剖区,结合区域地质调查分析,建立了包括浅变质岩层、超高压变质岩片在内的构造地层序列—岩片组合。对其组成特征、界面性质、形成时代、变形序列等,进行了较系统阐明,并对叠加褶皱型式及形成机制进行了讨论。