Effects of the oophagous bivalve Acesta oophaga on the morphology and fecundity of its deep‐sea tubeworm host,Lamellibrachia luymesi

The deep‐sea bivalve Acesta oophaga lives attached to the anterior end of the vestimentiferan tubeworm, Lamellibrachia luymesi, at cold methane seeps. The bivalve is found almost exclusively on female tubeworms, where it consumes the lipid‐rich eggs of L. luymesi that are spawned year round (Biological Bulletin, 209, 2005, 87). It is apparent that A. oophaga benefits directly from this close association, but the consequences for the tubeworm host may be more complicated than just a simple predator–prey interaction. Since A. oophaga completely surrounds the tube opening and plume of the worm, it is likely that its presence would limit oxygen uptake by L. luymesi, thereby inhibiting worm growth and reproduction. We hypothesized that occupied tubeworms would compensate for this by growing larger plumes for oxygen uptake. To explore the effects of bivalve presence/absence on female tubeworms, several morphological features, including body size, plume length, tube diameter, and tube segment length, as well as instantaneous fecundity, were compared. Results suggest that the mere presence of A. oophaga has a significant impact on the morphology of its host worm, as all measures of worm size, except for tube segment length, were significantly greater with clams present. Additionally, instantaneous fecundity was 3.5 times higher in occupied worms, implying that tubeworms are not oxygen‐deprived or energy limited as a result of bivalve presence. Our findings suggest that the association between these two deep‐sea organisms may be a more complex form of symbiosis than the simple predator–prey relationship, as previously thought.     

Contrasting soils and landscapes of the Piedmont and Coastal Plain, eastern United States

The Piedmont and Coastal Plain physiographic provinces comprise 80 percent of the Atlantic Coastal states from New Jersey to Georgia. The provinces are climatically similar. The soil moisture regime is udic. The soil temperature regime is typically thermic from Virginia through Georgia, although it is mesic at altitudes above 400 m in Georgia and above 320 m in Virginia. The soil temperature regime is mesic for the Piedmont and Coastal Plain from Maryland through New Jersey. The tightly folded, structurally complex crystalline rocks of the Piedmont and the gently dipping “layer-cake” clastic sedimentary rocks and sediments of the Coastal Plain respond differently to weathering, pedogenesis, and erosion. The different responses result in two physiographically contrasting terrains; each has distinctive near-surface hydrology, regolith, drainage morphology, and morphometry.The Piedmont is predominantly an erosional terrain. Interfluves are as narrow as 0.5 to 2 km, and are convex upward. Valleys are as narrow as 0.1 to 0.5 km and generally V-shaped in cross section. Alluvial terraces are rare and discontinuous. Soils in the Piedmont are typically less than 1 m thick, have less sand and more clay than Coastal Plain soils, and generally have not developed sandy epipedons. Infiltration rates for Piedmont soils are low at 6–15 cm/h. The soil/saprolite, soil/rock, and saprolite/rock boundaries are distinct (can be placed within 10 cm) and are characterized by ponding and/or lateral movement of water. Water movement through soil into saprolite, and from saprolite into rock, is along joints, foliation, bedding planes and faults. Soils and isotopic data indicate residence times consistent with a Pleistocene age for most Piedmont soils.The Coastal Plain is both an erosional and a constructional terrain. Interfluves commonly are broader than 2 km and are flat. Valleys are commonly as wide as 1 km to greater than 10 km, and contain numerous alluvial and estuarine terrace sequences that can be correlated along valleys for tens of kilometers. Coastal Plain soils are typically as thick as 2 to 8 m, have high sand content throughout, and have sandy epipedons. These epipedons consist of both A and E horizons and are 1 to 4 m thick. In Coastal Plain soils, the boundaries are transitional between the solum and the underlying parent material and between weathered and unweathered parent material. Infiltration rates for Coastal Plain soils are typically higher at 13–28 cm/h, than are those for Piedmont soils. Indeed, for unconsolidated quartz sand, rates may exceed 50 cm/h. Water moves directly from the soil into the parent material through intergranularpores with only minor channelization along macropores, joints, and fractures. The comparatively high infiltration capacity results in relatively low surface runoff, and correspondingly less erosion than on the Piedmont uplands.Due to differences in Piedmont and Coastal Plain erosion rates, topographic inversion is common along the Fall Zone; surfaces on Cenozoic sedimentary deposits of the Coastal Plain are higher than erosional surfaces on regolith weathered from late Precambrian to early Paleozoic crystalline rocks of the Piedmont. Isotopic, paleontologic, and soil data indicate that Coastal Plain surficial deposits are post-middle Miocene to Holocene in age, but most are from 5 to 2 Ma. Thus, the relatively uneroded surfaces comprise a Pliocene landscape. In the eastern third of the Coastal Plain, deposits that are less than 3.5 Ma include alluvial terraces, marine terraces and barrier/back-barrier complexes as morphostratigraphic units that cover thousands of square kilometers. Isotopic and soil data indicate that eastern Piedmont soils range from late Pliocene to Pleistocene in age, but are predominantly less than 2 Ma old. Thus, the eroded uplands of the Piedmont “peneplain” comprise a Pleistocene landscape.     

Typochemistry of rinkite and products of its alteration in the Khibiny Alkaline pluton,Kola Peninsula

The occurrence, morphology, and composition of rinkite are considered against the background of zoning in the Khibiny pluton. Accessory rinkite is mostly characteristic of foyaite in the outer part of pluton, occurs somewhat less frequently in foyaite and rischorrite in the central part of pluton, even more sparsely in foidolites and apatite–nepheline rocks, and sporadically in fenitized xenoliths of the Lovozero Formation. The largest, up to economic, accumulations of rinkite are related to the pegmatite and hydrothermal veins, which occur in nepheline syenite on both sides of the Main foidolite ring. The composition of rinkite varies throughout the pluton. The Ca, Na, and F contents in accessory rinkite and amorphous products of its alteration progressively increase from foyaite and fenitized basalt of the Lovozero Formation to foidolite, rischorrite, apatite–nepheline rocks, and pegmatite–hydrothermal veins.     

Factors controlling the adsorption of acid blue 113 dye from aqueous solution by dried <Emphasis Type="Italic">C. edulis</Emphasis> plant as natural adsorbent

Contamination of surface water and groundwater by organic pollutants is a serious problem due to their persistence, bioaccumulation and biomagnification through food webs. Since the removal of dyes from wastewater is considered an environmental challenge and government legislation requires textile wastewater to be treated, therefore there is a constant need to have an effective process that can efficiently remove these dyes. The aim of the present study is to evaluate the potentiality of dried Carpobrotus edulis plant as low-cost adsorbent for the removal of the industrial acid blue 113 dye from aqueous solutions using the batch equilibration technique. The effects of different physicochemical parameters such as adsorbent dose, contact time, initial dye concentration, solution pH and temperature on adsorption rate of anionic AB113 dye on microparticles of dried C. edulis plant were investigated. The experimental data were analyzed by using mathematical models to determine the thermodynamic parameters. The negative values of free energy change indicated the spontaneous nature of the adsorption and negative value of enthalpy change suggested the exothermic nature of the adsorption process. These results indicate that dried C. edulis plant as an environmentally friendly adsorbent could be potentially used for the removal of anionic dyes from aqueous solutions.     

Sr and Nd isotopic geochemistry of the early ultramafic–mafic rocks of the Mako bimodal volcanic belt of the Kedougou–Kenieba inlier (Senegal)

The Mako bimodal volcanic belt of the Kédougou–Kéniéba inlier is composed of volcanic basalts and peridotites interbedded by quartzites and limestones intruded by different generations of granitoïds. The early volcanic episode of the belt is constituted of submarine basalts with peridotite similar to those of the oceanic abyssal plains. It is intruded by the Badon Kakadian TTG?granitic batholite dated around 2200 Ma. The second volcanic phase is constituted of basaltic, andesitic, and felsitic flows exhibit structures of aerial volcanic rocks. It is intruded by granites dated between 2160 and 2070 Ma. The general pattern of trace element variation of submarine volcanic rocks is consistent with those of basalts from oceanic plateaus which are the modern equivalent of the Archean greenstones belts. The Nd and Sr isotopic systematics typical of juvenile material indicates that the source of these igneous rocks is derived from a depleted mantle source. These results are consistent with the idea of a major accretion within the West African Craton occurring at about 2.1 Ga and corresponding to an important process of mantle–oceanic lithosphere differentiation.     

Joint parameter estimation from magnetic resonance and vertical electric soundings using a multi‐objective genetic algorithm

Magnetic resonance sounding (MRS) has increasingly become an important method in hydrogeophysics because it allows for estimations of essential hydraulic properties such as porosity and hydraulic conductivity. A resistivity model is required for magnetic resonance sounding modelling and inversion. Therefore, joint interpretation or inversion is favourable to reduce the ambiguities that arise in separate magnetic resonance sounding and vertical electrical sounding (VES) inversions. A new method is suggested for the joint inversion of magnetic resonance sounding and vertical electrical sounding data. A one‐dimensional blocky model with varying layer thicknesses is used for the subsurface discretization. Instead of conventional derivative‐based inversion schemes that are strongly dependent on initial models, a global multi‐objective optimization scheme (a genetic algorithm [GA] in this case) is preferred to examine a set of possible solutions in a predefined search space. Multi‐objective joint optimization avoids the domination of one objective over the other without applying a weighting scheme. The outcome is a group of non‐dominated optimal solutions referred to as the Pareto‐optimal set. Tests conducted using synthetic data show that the multi‐objective joint optimization approximates the joint model parameters within the experimental error level and illustrates the range of trade‐off solutions, which is useful for understanding the consistency and conflicts between two models and objectives. Overall, the Levenberg‐Marquardt inversion of field data measured during a survey on a North Sea island presents similar solutions. However, the multi‐objective genetic algorithm method presents an efficient method for exploring the search space by producing a set of non‐dominated solutions. Borehole data were used to provide a verification of the inversion outcomes and indicate that the suggested genetic algorithm method is complementary for derivative‐based inversions.     

Simplified approach for design of raft foundations against fault rupture. Part Ⅰ: free-field

Over the past few decades, earthquake engineering research mainly focused on the effects of strong seismicshaking. After the 1999 earthquakes in Turkey and Taiwan, and thanks to numerous cases where fault rupture causedsubstantial damage to structures, the importance of faulting-induced deformation has re-emerged. This paper, along withits companion (Part Ⅱ), exploits parametric results of finite element analyses and centrifuge model testing in developing afour-step semi-analytical approach for analysis of dip-slip (normal and thrust) fault rupture propagation through sand, itsemergence on the ground surface, and its interaction with raft foundations. The present paper (Part Ⅰ) focuses on the effectsof faulting in the absence of a structure (i.e., in the free-field). The semi-analytical approach comprises two-steps: the firstdeals with the rupture path and the estimation of the location of fault outcropping, and the second with the tectonically-induced displacement profile at the ground surface. In both cases, simple mechanical analogues are used to derive simplifiedsemi-analytical expressions. Centrifuge model test data, in combination with parametric results from nonlinear finite elementanalyses, are utilized for model calibration. The derived semi-analytical expressions are shown to compare reasonably wellwith more rigorous experimental and theoretical data, thus providing a useful tool for a first estimation of near-fault seismichazard.