A note on the significance of the assemblage calcite-quartz-plagioclase-paragonite-graphite

The biotite zone assemblage: calcite-quartz-plagioclase (An₂₅)-phengite-paragonite-chlorite-graphite, is developed at the contact between a carbonate and a pelite from British Columbia. Thermochemical data for the equilibrium paragonite+calcite+2 quartz=albite+ anorthite+CO₂+H₂O yields: $$\log f{\text{H}}_{\text{2}} {\text{O}} + \log f{\text{CO}}_{\text{2}} = 5.76 + 0.117 \times 10^{ - 3} (P - 1)$$ for a temperature of 700°K and a plagioclase composition of An₂₅. By combining this equation with equations describing equilibria between graphite and gas species in the system C-H-O, the following partial pressures: \(P{\text{H}}_2 {\text{O}} = 2572{\text{b, }}P{\text{CO}}_2 = 3162{\text{b, }}P{\text{H}}_2 = 2.5{\text{b, }}P{\text{CH}}_4 = 52.5{\text{b, }}P{\text{CO}} = 11.0{\text{b}}\) are obtained for \(f{\text{O}}_2 = 10^{ - 26}\) . If total pressure equals fluid pressure, then the total pressure during metamorphism was approximately 6 kb. The total fluid pressure calculated is extremely sensitive to the value of \(f{\text{O}}_2\) chosen.     

PRINCIPLES AND APPLICATION OF MAXIMUM KURTOSIS PHASE ESTIMATION1

Methods of minimum entropy deconvolution (MED) try to take advantage of the non-Gaussian distribution of primary reflectivities in the design of deconvolution operators. Of these, Wiggins’(1978) original method performs as well as any in practice. However, we present examples to show that it does not provide a reliable means of deconvolving seismic data: its operators are not stable and, instead of whitening the data, they often band-pass filter it severely. The method could be more appropriately called maximum kurtosis deconvolution since the varimax norm it employs is really an estimate of kurtosis. Its poor performance is explained in terms of the relation between the kurtosis of a noisy band-limited seismic trace and the kurtosis of the underlying reflectivity sequence, and between the estimation errors in a maximum kurtosis operator and the data and design parameters. The scheme put forward by Fourmann in 1984, whereby the data are corrected by the phase rotation that maximizes their kurtosis, is a more practical method. This preserves the main attraction of MED, its potential for phase control, and leaves trace whitening and noise control to proven conventional methods. The correction can be determined without actually applying a whole series of phase shifts to the data. The application of the method is illustrated by means of practical and synthetic examples, and summarized by rules derived from theory. In particular, the signal-dominated bandwidth must exceed a threshold for the method to work at all and estimation of the phase correction requires a considerable amount of data. Kurtosis can estimate phase better than other norms that are misleadingly declared to be more efficient by theory based on full-band, noise-free data.     

Coalification in Carboniferous sediments from the Lötschberg base tunnel

Vitrinite reflectance (Rr), proximate analysis and carbon isotope composition (δ¹³C) have been used to characterise coal samples from two zones of Late Carboniferous sediments (Gastern and Ferden) in the Aar massif where they are penetrated by the Lötschberg base tunnel (constructed between 1999 and 2005). Samples are characterised by variable ash yields (21.7–93.9%; dry basis); those with ash yields of less than ~50% and with volatile matter content (V;dry ash-free basis) within the limits 2 < V% ≤ 8 are anthracite. Values of Rr range from 3.89% to 5.17% and indicate coalification to the rank of anthracite and meta-anthracite in both Gastern and Ferden Carboniferous zones. Samples of anthracite and shale from the Gastern Carboniferous exhibit a relatively small range in δ¹³C values (–24.52‰ to –23.38‰; mean: –23.86‰) and are lighter than anthracite samples from the Ferden Carboniferous (mean: –22.20‰). The degree of coalification in the Gastern and Ferden Carboniferous zones primarily depends on the maximum rock temperature (T) attained as a result of burial heating. Vitrinite reflectance based estimates of T range from ~290° –360 °C. For a proposed palaeogeothemal gradient of 25 ° C/km at the time of maximum coalification the required overburden is attributable to relatively thin autochtonous Mesozoic/Cenozoic sedimentary cover of the Aar massif and Gastern granite and deep tectonic burial beneath advancing Helvetic, Ultrahelvetic and Prealpine (Penninic) nappes in Early Oligocene to Miocene.     

A procedure for mapping vulnerability of sea-coastal zones to oil

An algorithm for mapping the vulnerability of sea-coastal zones is described. Normalization of the distribution densities of the biotic groups to the annual average abundance for presenting these data in identical measurement units is offered. Sensitivity of biota to oil should be normalized to the maximum permissible concentrations for the species inhabiting the water column and to the maximum permissible thickness of the film that has contacted with the water surface. All parameters should be estimated by the metric scale. The proposed algorithm makes it possible to calculate the vulnerability of a sea-coastal zone to oil pollution caused by oil spills.     

Preservation/exhumation of ultrahigh-pressure subduction complexes

Ultrahigh-pressure (UHP) metamorphic terranes reflect subduction of continental crust to depths of 90–140 km in Phanerozoic contractional orogens. Rocks are intensely overprinted by lower pressure mineral assemblages; traces of relict UHP phases are preserved only under kinetically inhibiting circumstances. Most UHP complexes present in the upper crust are thin, imbricate sheets consisting chiefly of felsic units ± serpentinites; dense mafic and peridotitic rocks make up less than  10% of each exhumed subduction complex. Roundtrip prograde–retrograde P–T paths are completed in 10–20 Myr, and rates of ascent to mid-crustal levels approximate descent velocities. Late-stage domical uplifts typify many UHP complexes.

Sialic crust may be deeply subducted, reflecting profound underflow of an oceanic plate prior to collisional suturing. Exhumation involves decompression through the P–T stability fields of lower pressure metamorphic facies. Scattered UHP relics are retained in strong, refractory, watertight host minerals (e.g., zircon, pyroxene, garnet) typified by low rates of intracrystalline diffusion. Isolation of such inclusions from the recrystallizing rock matrix impedes back reaction. Thin-aspect ratio, ductile-deformed nappes are formed in the subduction zone; heat is conducted away from UHP complexes as they rise along the subduction channel. The low aggregate density of continental crust is much less than that of the mantle it displaces during underflow; its rapid ascent to mid-crustal levels is driven by buoyancy. Return to shallow levels does not require removal of the overlying mantle wedge. Late-stage underplating, structural contraction, tectonic aneurysms and/or plate shallowing convey mid-crustal UHP décollements surfaceward in domical uplifts where they are exposed by erosion. Unless these situations are mutually satisfied, UHP complexes are completely transformed to low-pressure assemblages, obliterating all evidence of profound subduction.     

Template-based classification of SDSS-<Emphasis Type="BoldItalic">GALEX</Emphasis> point sources

We have classified a sample of 37,492 objects from SDSS into QSOs, galaxies and stars using photometric data over five wave bands (u, g, r, i and z) and UV GALEX data over two wave bands (near-UV and far-UV) based on a template fitting method. The advantage of this method of classification is that it does not require any spectroscopic data and hence the objects for which spectroscopic data is not available can also be studied using this technique. In this study, we have found that our method is consistent by spectroscopic methods given that their UV information is available. Our study shows that the UV colours are especially important for separating quasars and stars, as well as spiral and starburst galaxies. Thus it is evident that the UV bands play a crucial role in the classification and characterization of astronomical objects that emit over a wide range of wavelengths, but especially for those that are bright at UV. We have achieved the efficiency of 89% for the QSOs, 63% for the galaxies and 84% for the stars. This classification is also found to be in agreement with the emission line diagnostic diagrams.     

Using δN values in algal tissue to map locations and potential sources of anthropogenic nutrient inputs on the island of Maui, Hawai‘i, USA

Macroalgal blooms of Hypnea musciformis and Ulvafasciata in coastal waters of Maui only occur in areas of substantial anthropogenic nutrient input, sources of which include wastewater effluent via injection wells, leaking cesspools and agricultural fertilizers. Algal δ¹⁵N signatures were used to map anthropogenic nitrogen through coastal surveys (island-wide and fine-scale) and algal deployments along nearshore and offshore gradients. Algal δ¹⁵N values of 9.8‰ and 2.0-3.5‰ in Waiehu and across the north-central coast, respectively, suggest that cesspool and agricultural nitrogen reached the respective adjacent coastlines. Effluent was detected in areas proximal to the Wastewater Reclamation Facilities (WWRF) operating Class V injection wells in Lahaina, Kihei and Kahului through elevated algal δ¹⁵N values (17.8-50.1‰). From 1997 to 2008, the three WWRFs injected an estimated total volume of 193 million cubic meters (51 billion gallons) of effluent with a nitrogen mass of 1.74 million kilograms (3.84 million pounds).     

Clustering of groundwater chemistry data with implications for reservoir appraisal in West Siberia

Division of sedimentary strata according to groundwater chemistry is discussed with implications for petroleum reservoir potential. It is suggested to process multiparametric water chemistry data from West Siberia using formalized clustering techniques. The efficiency of this approach has been tested for Neocomian clinoform reservoirs with reference to regional-scale appraisal and subregional petroleum division.