Deposition of finely disseminated gold mineralization in black shales: A hypothesis of microstructural control

The deposition of finely disseminated gold in the deposits hosted in black shales is considered. It is suggested that gold deposition is controlled by microstructure of pore space in host rocks. The pore space structure of tight shales indicates that most pore volume is occupied by nanopores with hundredths of micrometers in characteristic dimension. The balance calculations show that deposition of native gold in nanopore channels of filtration is hampered by shortage of number of atoms necessary to overcome a nucleation threshold of the future gold crystal in the pore volume. When ore-transporting solution meets on its way the cavities (pores, micro- and macrofractures), whose volume is sufficient to overcome the nucleation threshold, the excess content of ore component, which exceeds equilibrium concentration, is released with formation of crystallization centers and further precipitation of gold. The conditions of ore deposition are exemplified in the reference Sukhoi Log deposit hosted in black shales. On the basis on the PT conditions of ore deposition and physical features of fluid heat and mass transfer, it is suggested that ore disseminations were deposited at the early high-temperature stage under a fluid pressure close to lithostatic and at a host rock permeability markedly exceeding its present-day value.     

On the Importance of Geolithological Features for the Estimate of the Site Response: The Case of Catania Metropolitan Area (Italy)

The evaluation of seismic site response in the urban area of Catania was tackled by selecting test areas having peculiar lithological and structural features, potentially favourable to large local amplifications of ground motion. The two selected areas are located in the historical downtown and in the northern part of Catania where the presence of a fault is evident. Site response was evaluated using spectral ratio technique taking the horizontal- to-vertical component ratio of ambient noise. Inferences from microtremor measurements are compared with results from synthetic accelerograms and response spectra computed at all drillings available for this area. Such method is particularly suitable in urban areas where the nature of the outcropping geological units is masked by city growth and anthropic intervention on the surface geology. The microtremor H/V spectral ratios evaluated at soft sites located within the downtown profile tend to be smaller than that usually reported in the literature for such soils. A tendency for amplifications to peaks near 2 Hz is observed only in some sites located on recent alluvial deposits. Evidences for amplifications of site effects (frequency range 4–8 Hz) were observed in the sampling sites located on the fault, with a rapid decrease of spectral amplitude just a few tenths of metres away from the discontinuity. Numerical simulations evidenced the importance of geolithological features at depth levels even greater than 20–30 m. Besides this, the results strongly confirm the importance of the subsurface geological conditions, in the estimate of seismic hazard at urban scale.     

Seismic characterization of switching platform geometries and dominant carbonate producers (Miocene,Las Negras,Spain)

The primary goals of seismic interpretation and quantification are to understand and define reservoir architecture and the distribution of petrophysical properties. Since seismic interpretation is associated with major uncertainties, outcrop analogues are used to support and improve the resulting conceptual models. In this study, the Miocene carbonates of Cerro de la Molata (Las Negras, south‐east Spain) have been selected as an outcrop analogue. The heterogeneous carbonate rocks of the Cerro de la Molata Platform were formed by a variety of carbonate‐producing factories, resulting in various platform morphologies and a wide range of physical properties. Based on textural (thin sections) and petrophysical (porosity, density, carbonate content and acoustic properties) analyses of the sediments, eleven individual facies types were determined. The data were used to produce synthetic seismic profiles of the outcrop. The profiles demonstrate that the spatial distribution of the facies and the linked petrophysical properties are of key importance in the appearance of the synthetic seismic sections. They reveal that carbonate factory and facies‐specific reflection patterns are determined by porosity contrasts, diagenetic modifications and the input of non‐carbonate sediment. The reflectors of the seismograms created with high‐frequency wavelets are coherent with the spatial distribution of the predefined facies within the depositional sequences. The synthetic seismograms resulting from convolution with lower frequency wavelets do not show these details – the major reflectors coincide with: (i) the boundary between the volcanic basement and the overlying carbonates; (ii) the platform geometries related to changes in carbonate factories, thus sequence boundaries; and (iii) diagenetic zones. Changes in seismic response related to diagenesis, switching carbonate producers and linked platform geometries are important findings that need to be considered when interpreting seismic data sets.     

Perimagmatische und apomagmatische Lagerstätten

Ohne Zusammenfassung     

Morphology and structure of the Galapagos Rise

Geophysical data collected on three U.S. Naval Oceanographic Office cruises to the Galapagos Rise are presented. These data allow definition of the morphology and structure of the Galapagos Rise.A postulated “hot spot” beneath the Galapagos platform is suggested as the cause of: (1) decreased seismicity along the spreading center for a 400 km E—W distance from the islands; (2) distinctive petro-chemistry of tholeiites from the islands and adjacent oceanic crust generated by the Galapagos Rise; (3) high-amplitude magnetic anomalies in a 1,000 km E—W band including and just north of the Galapagos platform; and (4) morphologic shape and the regionally elevated sea floor of the Galapagos Rise as it approaches the insular platform.     

Fluid inclusion and stable isotope characteristics of the Karalar (Gazipaşa,Antalya) barite-galena deposits,Southern Turkey

The Karalar galena-barite deposits are typical examples of the carbonate-hosted barite-galena deposits widely occurring in the Central Tauride Belt. These deposits are located in Permian limestones as ore veins along fault zones that are discordant to the bedding planes and as thin veinlets within hardly brecciated bottom zones of Permian limestones. The ore deposits contain mainly barite and galena and small amounts of sphalerite, pyrite, fahlore, limonite, quartz, and calcite. Barites occur during the earlier episode of mineralization and were mylonitized before the formation of galena. Galena and other minerals occur epigenetically with barite along porous zones between brecciated barite crystals and are especially abundant in the hardly mylonitized zones. Fluid inclusion studies indicate that the ore deposits of the area were developed by hydrothermal fluids with following characteristics: they contained NaCl, CaCl₂, and MgCl₂; the salinity of the fluids was relatively high and their temperature was low during the crystallization of barites in the earlier episode of mineralization; and the salinity of the fluids decreased and their temperature increased during the crystallization of sulfide minerals through the later episode of mineralization. δ₁₈O and the δD results indicate that the water in the mineralizing fluid was of meteoric origin. The deposits were formed by deep meteoric water circulating through marine sediments. Shallow circulating and slightly warmed fluids dissolved Ba and sulfate from marine sediments of the basement and transported them to the mineralization environment during the early episode, while deep circulating and more heated fluids dissolved Pb, Zn, and other elements from the basement and reached the environment during the later episode of mineralization. The text was submitted by the authors in English.     

Geomorphic and sedimentological signature of a two‐phase outburst flood from moraine‐dammed Queen Bess Lake,British Columbia,Canada

On 12 August 1997, the lower part of Diadem Glacier in the southern Coast Mountains of British Columbia fell into Queen Bess Lake and produced a train of large waves. The waves overtopped the broad end moraine at the east end of the lake and ?ooded the valley of the west fork of Nostetuko River. The displacement waves also incised the out?ow channel across the moraine. Stratigraphic and sedimentologic evidence supports the conclusion that the ?ood had two phases, one related to wave overtopping and a second to breach formation. Empirical equations were used to calculate the peak discharge of the ?ood at various points along the west fork of the Nostetuko valley and to describe the attenuation of the ?ood wave. The velocity of the ?ood was also calculated to determine the time it took for the ?ood to reach the main fork of Nostetuko River. The highest peak discharges were achieved in the upper reach of the valley during the displacement phase of the ?ood. Peak discharge declined rapidly just below the moraine dam, with little change thereafter for approximately 7 km. Empirical formulae and boulder measurements indicate a rise in peak discharge in the lower part of the west fork valley. We suggest that ?ow in the upper part of the valley records the passage of two separate ?ood peaks and that the rise in discharge in the lower part of the valley is due to amalgamation of the wave and breach peaks. Hydraulic ponding in con?ned reaches of the valley extended the duration of the ?ood. In addition, erosion of vegetation and sediment in the channel and valley sides may also have exerted an in?uence on the duration and nature of ?ooding. Sediments were deposited both upstream and downstream of channel constrictions and on a large fan extending out into the trunk Nostetuko River valley. This study extends our understanding of the variety and complexity of outburst ?oods from naturally dammed lakes. It also shows that simple empirical and other models for estimating peak discharges of outburst ?oods are likely to yield erroneous results. Copyright © 2005 John Wiley & Sons, Ltd.     

Reconstruction of natural groundwater flow paths in the multiple aquifer system of the northern Negev (Israel), based on lithological and structural evidence

 The Judea Group, a limestone and dolomite karstic aquifer of late Albian–Turonian age, is one of the most important sources of water in Israel. In the western part of the country, the Judea Group aquifer is also known as the Yarkon–Taninim basin. In the northern Negev, the Judea Group is a recipient for fresh water flowing southward from the Hebron Mountains and of brackish paleowater flowing northward from Sinai. Very little is known of the hydraulic properties of this aquifer. In order to outline assumed natural flow paths that existed in this karstic environment prior to groundwater exploitation, use was made of lithological, structural, and paleomorphological features. A detailed hydrogeological conceptual model of the Judea Group aquifer in northern Negev was established by the geological interpretation of high-resolution seismic reflection and by analysis of lithological evidence from boreholes. Isopach, isolith-contour, and isolith-ratio maps were compiled for the main lithological components. Increase in transmissivity values is inversely proportional with the cumulative thickness of argillaceous components. The lithological and hydraulic evidence provides the basis for subdividing the subsurface into distinctive permeability zones for the upper and lower sections of the aquifer; for outlining possible preferential groundwater flow paths for both subaquifers; and for improving understanding of groundwater-salinty variations that result from lithological variability, direction of groundwater flow paths, groundwater flow rates, and the duration of rock/water interactions. In an earlier conceptual model of the basin, the Judea Group aquifer was regarded as a continuous and undisturbed entity. The present study reveals an intricate groundwater flow pattern that is controlled by lithological and structural factors that create zones of preferential flow. This interpretation bears on the overall evaluation of groundwater resources and their management and exploitation. Received, December 1996 · Revised, October 1997, June 1998 · Accepted, July 1998     

Evolution of the Nyiragongo Magma

This paper deals with the rocks, mainly foiditic in composition,of the Nyiragongo volcano and compares them with the mainlytephritic to phonolitic rocks of the neighbouring Nyamuragiravolcano and with the South Kivu basaltic rocks. All these rocksoccur in the Lake Kivu area of the Western Rift Valley of CentralAfrica. Two hundred and sixty-four chemical analyses consideredrepresentative were selected of these rock groups and were subjectedto statistical evaluation. The Nyiragongo magma is considered to be of mantle origin withoutsignificant crustal admixture. The Nyamuragira magma and theNyiragongo magma are both potassic in character and, despitebeing geographically closely related, display pronounced differencesin chemistry. The fairly extreme composition of the Nyiragongomagma is interpreted as a result of a locally strong transferand enrichment of mainly alkalis with a passive depletion ofsilica.