Frost risk mapping for landscape planning: A methodology

Summary Minimum air temperatures were measured during three winters with a network of stations in open, undulating terrain. It was observed that the change in minimum air temperature with elevation could be predicted from mean nighttime windspeed, total nighttime net radiation loss and a hill-top reference minimum temperature. It was also found that the deviation of temperatures at individual sites could be predicted from a local terrain parameter which reflects the extent of cold air accumulations. Thus a methodology for frost risk mapping has been developed which is based on regional weather dataand local terrain analysis. This paper describes the model and illustrates the regional weather and terrain effects with three-dimensional block diagrams.With 8 Figures     

Magnetic Anisotropy as an Aid to Identifying CRM and DRM in Red Sedimentary Rocks

To further evaluate the potential of magnetic anisotropy techniques for determining the origin of the natural remanent magnetization (NRM) in sedimentary rocks, several new remanence anisotropy measurement techniques were explored. An accurate separation of the remanence anisotropy of magnetite and hematite in the same sedimentary rock sample was the goal.In one technique, Tertiary red and grey sedimentary rock samples from the Orera section (Spain) were exposed to 13 T fields in 9 different orientations. In each orientation, alternating field (af) demagnetization was used to separate the magnetite and hematite contributions of the high field isothermal remanent magnetization (IRM). Tensor subtraction was used to calculate the magnetite and hematite anisotropy tensors. Geologically interpretable fabrics did not result, probably because of the presence of goethite which contributes to the IRM. In the second technique, also applied to samples from Orera, an anisotropy of anhysteretic remanence (AAR) was applied in af fields up to 240 mT to directly measure the fabric of the magnetite in the sample. IRMs applied in 2 T fields followed by 240 mT af demagnetization, and thermal demagnetization at 90°C to remove the goethite contribution, were used to independently measure the hematite fabric in the same samples. This approach gave geologically interpretable results with minimum principal axes perpendicular to bedding, suggesting that the hematite and magnetite grains in the Orera samples both carry a depositional remanent magnetization (DRM). In a third experiment, IRMs applied in 13 T fields were used to measure the magnetic fabric of samples from the Dome de Barrot area (France). These samples had been demonstrated to have hematite as their only magnetic mineral. The fabrics that resulted were geologically interpretable, showing a strong NW-SE horizontal lineation consistent with AMS fabrics measured in the same samples. These fabrics suggest that the rock's remanence may have been affected by strain and could have originated as a DRM or a CRM.Our work shows that it is important to account for the presence of goethite when using high field IRMs to measure the remanence anisotropy of hematite-bearing sedimentary rocks. It also shows that very high magnetic fields (>10 T) may be used to measure the magnetic fabric of sedimentary rocks with highly coercive magnetic minerals without complete demagnetization between each position, provided that the field magnetically saturates the rock.     

A preliminary investigation into the use of ochre as a remedial amendment in arsenic-contaminated soils

Ochre is an unwanted waste product that accumulates in wetlands and streams draining abandoned coal and metal mines. A potential commercial use for ochre is to remediate As contaminated soil. Arsenic contaminated soil (605 mg kg⁻¹) was mixed with different ochres (A, B and C) in a mass ratio of 1:1 and shaken in 20 mL of deionised water. After 72 h As concentration in solution was ca. 500 μg kg⁻¹ in the control and 1–2.5 μg kg⁻¹ in the ochre treated experiments. In a second experiment soil:ochre mixtures of 0.05–1:1 were shaken in 20 mL of deionised water for 24 h. For Ochres A and C, as solution concentration was reduced to ca. 1 μg kg⁻¹ by 0.2–1:1 ochre:soil mixtures. For Ochre B, as concentration only reached ca. 1 μg kg⁻¹ in the 1:1 ochre:soil mix. Sorption of As was best modelled by a Freundlich isotherm using As sorption per mass of goethite in the ochre (log K = 1.64, n = 0.79, R² = 0.76, p 0.001). Efficiency of ochre in removing As from solution increased with increasing total Fe, goethite, citrate dithionite extractable Fe and surface area.     

Estimating water balance components of tropical wetland lakes in the Pantanal dry season,Brazil

Abstract

Water balance studies with stable water isotopes have rarely been conducted in remote and tropical wetland areas. As such, little is known regarding the water balance and groundwater–surface water interaction in the Pantanal, one of the largest and most pristine wetlands in the world. We applied MINA TrêS, a water balance model utilizing stable water isotopes (δ¹⁸O, δ²H) and chloride (Cl^-) to assess the dry-season hydrological processes controlling groundwater–surface water interactions and the water balance of six floodplain lakes in the northern Pantanal, Brazil. Qualitatively, all lakes exhibited similarity in hydrological controls. Quantitatively, they differed significantly due to morphological differences in controlling groundwater inflow and lake volume. Our approach is readily transferable to other remote and tropical wetland systems with minimal data input requirements, which is useful in regions with sparse hydrometric monitoring.

Editor Z.W. Kundzewicz     

Uranium and lead gain of detrital zircon studied by isotopic analyses and fission-track mapping

Besides Pb and U loss and mixing of crystals of different age, U gain is considered a possible cause of discordant U-Pb ages of zircons. However, whether U gain without new zircon growth occurs in nature had not been proven, so far. In order to test this possibility, two detrital zircon populations were studied for which the absence of later zircon overgrowth after deposition could be demonstrated. The samples were separated from a metaquartzite near a large pegmatite body and from metaquartzite inclusions found in the pegmatite (Martell Valley, Italian Alps). The distribution of neutron-induced fission tracks reveals distinct accumulation of U in the rims of more than 90% of the zircon grains of the inclusions (total U in the crystals: 540–850 ppm), whereas in the country rock only some of the grains show similar but weaker patterns (total U: 155–320 ppm). From the isotopic data and from additional U-Pb and Rb-Sr analyses of minerals and whole-rock samples of the pegmatite, the marginal accumulation and the higher concentration of U in the zircon grains of the inclusions are interpreted as the result of episodic U gain during the intrusion of the pegmatite and/or during a later metamorphism. From the concentration levels of common Pb, an addition of Pb - and possibly other elements - to the zircon grains is inferred.     

Longshore variations in nearshore wave processes at magilligan point,northern ireland

Magilligan Point is a recurved cuspate foreland at the mouth of Lough Foyle. Two wave regimes intersect in the estuary mouth and the manner of their interplay controls shoreline changes. Ocean swell waves from the N and NE are refracted around the recurve, losing both height and energy longshore. Width of the surf zone decreases and waves tend to steepen, although both these changes and wave refraction owe something to nearshore geometry. Angle of wave approach becomes more acute and a westerly flowing longshore current moves sand S and SW along the beach. Estuary waves from the S and SW are wind-driven with high-frequencies and steepnesses. They generate a northeasterly current which returns material N, but dies out as the waves become obliterated by nearshore attenuation and breaking of swell. It is possible to identify a time-averaged null-point where shoreline wave power is balanced, although this tends to shift over short periods causing rapid morphological changes. The existence of two independent, but counteractive cells ensures the long-term maintenance of the foreland, without requiring major or continuous supplies of fresh sediment.     

Bücher- und Zeitschriftenschau

Ohne Zusammenfassung     

Variability in bedform morphology and kinematics with transport stage

Bedform geometry is widely recognized to be a function of transport stage. Bedform aspect ratio (height/length) increases with transport stage, reaches a maximum, then decreases as bedforms washout to a plane bed. Bedform migration rates are also linked to bedform geometry, in so far as smaller bedforms in coarser sediment tend to migrate faster than larger bedforms in finer sediment. However, how bedform morphology (height, length and shape) and kinematics (translation and deformation) change with transport stage and suspension have not been examined. A series of experiments is presented where initial flow depth and grain size were held constant and the transport stage was varied to produce bedload dominated, mixed‐load dominated and suspended‐load dominated conditions. The results show that the commonly observed pattern in bedform aspect ratio occurs because bedform height increases then decreases with transport stage, against a continuously increasing bedform length. Bedform size variability increased with transport stage, leading to less uniform bedform fields at higher transport stage. Total translation‐related and deformation‐related sediment fluxes all increased with transport stage. However, the relative contribution to the total flux changed. At the bedload dominated stage, translation‐related and deformation‐related flux contributed equally to the total flux. As the transport stage increased, the fraction of the total load contributed by translation increased and the fraction contributed by deformation declined because the bedforms got bigger and moved faster. At the suspended‐load dominated transport stage, the deformation flux increased and the translation flux decreased as a fraction of the total load, approaching one and zero, respectively, as bedforms washed out to a plane bed.