Defining the geochemical baseline: a case of Hong Kong soils

A geochemical baseline provides the means to distinguish between the pedogenic origin and the anthropogenic origin of the trace element in the environmental compartments. We collected 271 soil samples representative of different parent rocks and soil types from the whole territory of Hong Kong and analyzed the composition of clay mineralogy and the contents of 15 chemical elements (Fe, Cd, As, etc.) for these samples. The baseline was predicted with the method of the normalization procedure combined with the relative cumulative frequency curve. The result indicated that Fe was the best reference element for the normalization procedure among the five potential reference elements (Fe, Al, Sc, Ti, and Mn), followed by Sc and Ti. A poor correlation was found between Sc, Ti, and Cu. The predicted baseline was much lower than the A-value of the Dutch List used usually in screening the polluted soil of Hong Kong, implying that the extent of heavy metal pollution might have been underestimated with respect to local lands. We also applied the cluster analysis to distinguish the geochemical associations of the trace elements due to its importance to the baseline. Approximately three major associations including the Fe–Mn-oxides related, Al oxides or Al-bearing-clay-mineralogy related and sulfide- related associations were observed from the dendrogram.     

IR photometry and models for the dust envelopes of two carbon stars

The results of JHKLM photometry of two carbon stars are presented: the irregular variable NQ Cas and the Mira star BD Vul. Data on the mean fluxes supplemented with mid-IR observations with the IRAS, AKARI, andWISE satellites are used to compute spherically symmetrical model dust envelopes for the stars, consisting of particles of amorphous carbon and silicon carbide. The optical depth in the visible for the comparatively cool dust envelope of BD Vul, with a dust temperature at its inner boundary T₁ = 610 K, is fairly low: τ_V = 0.13. The dust envelope of NQ Cas is appreciably hotter (T₁ = 1550 K), and has τ_V = 0.32. The estimated mass-loss rates are 1.5 × 10^?7M_⊙/yr for NQ Cas and 5.9 × 10^?7M_⊙/yr for BD Vul.     

The Petrology and Origin of the Tertiary Lundy Granite (Bristol Channel, UK)

The British Tertiary Volcanic Province (BTVP) comprises within-platecentral igneous complexes associated with plateau lavas andregional dyke swarms. Lundy is the southernmost complex of theBTVP and comprises granite ({small tilde}90%) emplaced intodeformed Devonian sedimentary rocks within the Hercynian Cornubiangranite province of southwest England. The complex is intrudedby a northwest-southeast trending dyke swarm. In common withother BTVP igneous complexes, Lundy is associated with positivegravity and magnetic anomalies which are interpreted in termsof the presena of an underlying basic intrusion at shallow depth,with a volume exceeding that of the overlying granite. The Lundy intrusion is a coarse-grained megacrystic granitecontaining up to 20% alkali feldspar megacrysts in a coarse-grainedgroundmass composed of alkali feldspar, quartz, lithium-bearingmuscovite, and ‘biotite’ (lithian siderophyllite),with a range of aaxssory minerals. The main granite has a coarse-grained(locally miarolitic) pegmatitic facies and is intruded by thinsheets and veins of fine-grained aplite and microgranite. Themineralogy indicates crystallization of the Lundy granite froma highly fractionated H₂O- and halogen-rich magma at a relativelyshallow crustal level. The main Lundy granite is a peraluminous leucogranite with Na₂O=3–4%,K₂O{small tilde}5%, low TiO₂, MeO, CaO, Zr, and Sr, and highRb and Rb/Sr in comparison with many other peralurninous granites,including those from the Cornubian batholith and the BTVP. Anew Rb-Sr whole-rock isochron for the granite yields an ageof 58?7?1?6 Ma with an initial ⁸⁷Sr/86Sr of 0?715?0?006. _Ndvalues for the granite (–0?9 to –1?9) plot betweencontemporaneous mantle (positive _Nd and Cornubian granites (_Nd=ca.–11). The trace element data (Rb, Y, Nb) show affinities with syn-collisionand within-plate granites. As the Sr isotope data indicate amajor crustal component, and the Nd isotope data suggest bothmantle and crustal components, we propose that the Lundy graniteis derived from a parental magma comprising crustal components(derived from a similar source to that of the Cornubian granitebatholith) and a mantle-derived component (derived from a differentiateof contemporaneous basaltic magma This magma experienced fractionalcrystallization of plagioclase, alkai feldspar, Fe-Mg minerals,and REE-bearing accessory minerals before emplacement, and theLundy granite experienced further in situ fractional crystallization,associateded with crustal contamination by the Devonian shaleafter emplacement.     

Resource allocation for regional earthquake risk mitigation: a case study of Tehran,Iran

This paper presents a new optimization model to help cities in seismically active developing countries decide (1) How much to spend on pre-earthquake mitigation versus waiting until after an event and paying for reconstruction or simply not rebuilding damaged buildings? (2) Which buildings to mitigate and how? and (3) Which buildings to reconstruct and how? It extends previously developed optimization models to consider the particular issues that arise in such countries. First, the model allows for the possibility that some damaged buildings will not be reconstructed immediately and keeps track of any lost building inventory. Second, buildings can be mitigated to, or when damaged, reconstructed to, any appropriate structural type and seismic design level. Finally, the model objectives include minimizing the chance of an extremely high death toll in any one earthquake and minimizing the average annual death toll across earthquakes. The model is illustrated through a case study analysis for Tehran, Iran.     

Simulating the effect of hydrate dissociation on wellhead stability during oil and gas development in deepwater

It is well known that methane hydrate has been identified as an alternative resource due to its massive reserves and clean property. However, hydrate dissociation during oil and gas development (OGD) process in deep water can affect the stability of subsea equipment and formation. Currently, there is a serious lack of studies over quantitative assessment on the effects of hydrate dissociation on wellhead stability. In order to solve this problem, ABAQUS finite element software was used to develop a model and to evaluate the behavior of wellhead caused by hydrate dissociation. The factors that affect the wellhead stability include dissociation range, depth of hydrate formation and mechanical properties of dissociated hydrate region. Based on these, series of simulations were carried out to determine the wellhead displacement. The results revealed that, continuous dissociation of hydrate in homogeneous and isotropic formations can causes the non-linear increment in vertical displacement of wellhead. The displacement of wellhead showed good agreement with the settlement of overlying formations under the same conditions. In addition, the shallower and thicker hydrate formation can aggravate the influence of hydrate dissociation on the wellhead stability. Further, it was observed that with the declining elastic modulus and Poisson’s ratio, the wellhead displacement increases. Hence, these findings not only confirm the effect of hydrate dissociation on the wellhead stability, but also lend support to the actions, such as cooling the drilling fluid, which can reduce the hydrate dissociation range and further make deepwater operations safer and more efficient.     

Set-asides for carbon sequestration: implications for permanence and leakage

This paper examines the potential role of forest set-asides in global carbon sequestration policy. While set asides that protect forests from timber harvests and land-use conversion may alleviate concerns with permanence, and they may provide large ancillary environmental benefits, they may also lead to large leakage. This paper uses a global land use and forestry model to examine the efficiency of three crediting schemes for set-asides. The results show that if set-asides are integrated into a global forestry carbon sequestration program that includes a wide range of other management options, then 300 million hectares of land would be set-aside, and up to 128 Pg C could be sequestered in global forests by 2105. Under alternative policies that focus exclusively on set-asides, more forestland can be set-asides, up to 3.2 billion hectare, but these policies invite large leakage in the near-term, and in the long-run, they less net carbon is removed from the atmosphere. Specifically, leakage is estimated to be 47–52%, depending on the policy, and by the end of the century, up to 17% less carbon will be sequestered in all forests.     

Cosmogenic radiocarbon as a means of studying solar activity in the past

A series of yearly data on the concentration of radioactive carbon ¹⁴C in tree rings measured at the Tbilisi State University in 1983–1986 and covering the time interval 1600–1940 is statistically analyzed. We find evidence for a 22-year cyclicity in the intensity of Galactic cosmic rays (GCRs) during the Maunder minimum of the solar activity (1645–1715), testifying that the solar dynamo mechanism continued to operate during this epoch. Variations of Δ¹⁴C on timescales of tens and hundreds of years correlate well with the corresponding variations of the GCR intensity and solar activity, making radiocarbon a reliable source of information on long-timescale variations of solar activity in the past. Short-timescale (<30 years) fluctuations of Δ¹⁴C may be appreciably distorted by time variations not associated directly with solar activity; probable origins of this distortion are discussed.     

Theoretical calculation of equilibrium Mg isotope fractionation between silicate melt and its vapor

Isotope fractionation during the evaporation of silicate melt and condensation of vapor has been widely used to explain various isotope signals observed in lunar soils, cosmic spherules, calcium–aluminum-rich inclusions, and bulk compositions of planetary materials. During evaporation and condensation, the equilibrium isotope fractionation factor (α) between high-temperature silicate melt and vapor is a fundamental parameter that can constrain the melt’s isotopic compositions. However, equilibrium α is difficult to calibrate experimentally. Here we used Mg as an example and calculated equilibrium Mg isotope fractionation in MgSiO₃ and Mg₂SiO₄ melt–vapor systems based on first-principles molecular dynamics and the high-temperature approximation of the Bigeleisen–Mayer equation. We found that, at 2500 K, δ²⁵Mg values in the MgSiO₃ and Mg₂SiO₄ melts were 0.141?±?0.004 and 0.143?±?0.003‰ more positive than in their respective vapors. The corresponding δ²⁶Mg values were 0.270?±?0.008 and 0.274?±?0.006‰ more positive than in vapors, respectively. The general \(\alpha - T\) equations describing the equilibrium Mg α in MgSiO₃ and Mg₂SiO₄ melt–vapor systems were: \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.264 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\) and \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.340 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\), respectively, where m is the mass of light isotope ²⁴Mg and m′ is the mass of the heavier isotope, ²⁵Mg or ²⁶Mg. These results offer a necessary parameter for mechanistic understanding of Mg isotope fractionation during evaporation and condensation that commonly occurs during the early stages of planetary formation and evolution.     

Cyclic degradation and non-coaxiality of soft clay subjected to pure rotation of principal stress directions

Foundation soils are often under non-proportional cyclic loadings. The deformation behaviour and the mechanism of non-coaxiality under continuous pure principal stress rotation for clays are not clearly investigated up to now. In order to study the effect of pure principal stress rotation, a series of cyclic undrained tests on Shanghai soft clay subjected to cyclic rotation of principal stress directions keeping the deviatoric stress constant under the pure rotation condition were conducted using hollow cylinder apparatus. Based on this, the evolutions of excess pore pressure and strains during cyclic loading were investigated, together with the effects of the intermediate principal stress parameter and the deviatoric stress level on stress–strain stiffness and non-coaxiality. The result can provide an experimental basis for constitutive modelling of clays describing the behaviour under non-proportional loadings.     

Geochemical characteristics of sphagnum brown coal — A possible oil-generating precursor

A preliminary study of newly discovered sphagnum brown coal from the Jingsuo Basin, Yunnan Province, China, which is quite rich in montan wax, indicates the predominance of highern-alkane homologues and aromatized triterpenoid components. Aromatic hydrocarbons are composed mainly of pentacyclic and tetracyclic di-, tri- and tetra-aromatic components, which are obviously diagenetically related to higher plant-derived triterpenoids naturally occurring in the biosphere. Because the sphagnum brown coal still remains in the highly immature stage, it seems that the progressive diagenetic aromatization of the higher plant-derived triterpenoids may start at a very early stage.