Unusually low coronal radio emission at the solar minimum

We present two-dimensional observations of the quiet Sun at 73.8, 50.0, and 38.5 MHz obtained with the Clark Lake Radioheliograph during the sunspot minimum period of September 1986. The observed peak brightness temperatures during the entire period of sunspot minimum are found to be extremely low, lying in the range (0.6 × 10⁵ K – 2.5 × 10⁵ K). It is shown that these low values cannot be explained by the generally adopted models for N _e and T _e in a homogeneous corona. The effect of scattering by random density fluctuations is introduced in order to decrease the values of predicted T _b . The value of peak T _b is computed as a function of relative r.m.s. density fluctuations = <N _e >/N _e ; and it is found that should be in the range from 0.07 to 0.19, 0.1 to 0.25, and 0.15 to 0.35, respectively, at 38.5, 50.0, and 73.8 MHz, respectively, to explain the observed low brightness temperatures.On leave from Indian Institute of Astrophysics, Bangalore, India.     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

Chronology and cooling history of the Tianmenshan pluton in South Jiangxi Province and their geological significance

Geochronological studies on the crust-derived Tianmenshan pluton were undertaken by SHRIMP zircon U-Pb dating and Ar-Ar dating of biotite, muscovite and K-feldspar, giving a petrogenetic age of 167 Ma. Owing to the closure systems in different minerals, the cooling history of the pluton can be determined with an age-temperature diagram. The late hydrothermal event has been recognized, which is related probably with mineralization. In terms of the comparative geochronological and petrologic records, it is concluded that there are some constrains on tectonic evolution and that the formation of the Tianmenshan pluton proceeded in a transition period from Indosinian post-orogeny extension to strong compressive tectonics. And the timing of the hydrothermal event matches the compressive climax of the Yanshanian orogeny. The temporal gap between granite emplacement and wolframite mineralization could last 10-20 Ma owing to the low cooling rate of the pluton.     

Study on rain-runoff process in the peripheral mountainous area of the Sichuan Basin

Studies on rain-runoff process in the peripheral mountainous area of the Sichuan Basin, which is regarded as a key ecological shelter, will contribute to flood control and environmental protection for the Upper Yangtze River Basin. In two typical catchments--the Fujiang River Catchment and the Wujiang River Catchment, rainfall simulations have been conducted to study the rain-runoff processes of yellow soil and limestone soil in three types of land use--forestland, farmland and grassland. Results showed that （1） within the same rainfall process, overland flow occurs first on farmland, then on grassland, and finally on forestland; （2） soil surface coverage has a great impact on the occurrence and amount of overland flow. The runoff amount can increase 2-4 times after the coverage is removed; （3） the infiltration before the occurrence of overland flow will decrease because of higher gravel contents of soil, but it takes no effect on infiltration once overland flow becomes stable; （4） the runoff coefficient of the limestone soil forestland is greater than that of the yellow soil forest land, but less than that of the farmland; （5） three empirical infiltration models, including Horton＇ model, Kostiakov＇ model, and modified Kostiakov＇ model, were compared by using the observed results under rainfall simulation. The results showed that the Kostiakov＇ model performed better than both the Horton＇ model and modified Kostiakov model. According to the results of this research, the Kostiakov＇s model can be used to simulate rainfall infiltration when water erosion is modeled in the peripheral mountainous area of the Sichuan Basin.     

Using spectral information from the NIR water absorption features for the retrieval of canopy water content

Canopy water content (CWC) is important for mapping and monitoring the condition of the terrestrial ecosystem. Spectral information related to the water absorption features at 970 nm and 1200 nm offers possibilities for deriving information on CWC. In this study, we compare the use of derivative spectra, spectral indices and continuum removal techniques for these regions. Hyperspectral reflectance data representing a range of canopies were simulated using the combined PROSPECT + SAILH model. Best results in estimating CWC were obtained by using spectral derivatives at the slopes of the 970 nm and 1200 nm water absorption features. Real data from two different test sites were analysed. Spectral information at both test sites was obtained with an ASD FieldSpec spectrometer, whereas at the second site HyMap airborne imaging spectrometer data were also acquired. Best results were obtained for the derivative spectra. In order to avoid the potential influence of atmospheric water vapour absorption bands the derivative of the reflectance on the right slope of the canopy water absorption feature at 970 nm can best be used for estimating CWC.     

Application of remote sensing technology for Impact Assessment of Watershed Development Programme

The current study was taken up to investigate the utility of remote sensing and GIS tools for evaluation of Integrated Wasteland Development Programme (IWDP) implemented during 1997–2001 in Katangidda Nala watershed, Chincholi taluk, Gulbarga district, Karnataka. The study was carried out using IRS 1C, LISS III data of December 11, 1997 (pre-treatment) and November 15, 2002 (post-treatment) covering the watershed to assess the changes in land use / land cover and biomass that have changed over a period of five years (1997–2002). The images were classified into different land use/land cover categories using supervised classification by maximum likelihood algorithm. They were also classified into different biomass levels using Normalized Difference Vegetation Index (NDVI) approach. The results indicated that the area under agriculture crops and forest land were increased by 671 ha (5.7%) and 1,414 ha (11.94%) respectively. This is due to the fact that parts of wastelands and fallow lands were brought into cultivation. This increase in the area may be attributed to better utilization of surface and ground waters, adoption of soil and water conservation practices and changes in cropping pattern. The area under waste lands and fallow lands decreased by 1,667 ha (14.07%) and 467 ha (3.94%), respectively. The vegetation vigour of the area was classified into three classes using NDVI. Substantial increase in the area under high and low biomass levels was observed (502 ha and 19 ha respectively). The benefit-cost analysis indicates that the use of remote sensing and GIS was 2.2 times cheaper than the conventional methods. Thus, the repetitive coverage of the satellite data provides an excellent opportunity to monitor the land resources and evaluate the land cover changes through comparison of images for the watershed at different periods.     

Use of laser range and height texture cues for building identification

Airborne LiDAR has found application in an increasing number of mapping and Geo-data acquisition tasks. Apart from terrain information generation, applications such as automatic detection and modeling of objects like buildings or vegetation for the generation of 3-D city models have been explored. Besides the height itself, height texture defined by local variations of the height is a significant parameter for object recognition. The paper explores the potential of the analysis of height texture as a cue for the automatic detection of objects in LiDAR datasets. A number of texture measures were computed. Based on their definition and computation these measures were used as bands in a classification algorithm, and objects like buildings, single trees, and roads could be recognized.     

Urban cadastral mapping using very high resolution remote sensing data

With growing urban expanses, one of the pre-requisites for effective governance is Urban Information Systems (UIS) with content down to individual properties (and individuals). The basic input i.e., a map, in UIS should show individual property boundaries showing the plan outline of all structures existing within, at a scale of 1:1000 and larger with sub-metre to centimeters planimetric and geometric accuracy. With very high resolution remote sensing data of the order of 1m available in hand, it is possible to prepare maps with high resolution spatial content. The present exercise demonstrates a method of preparing a geometrically and planimetrically accurate urban cadastral map on very large scale for a small area of about 5 sq km. IKONOS merged data with 1m resolution is used for the purpose. Mapping was done in conjunction with on-site measurements and sketches. Guides are used to maintain shape symmetry and accuracy of buildings and other features. Working out cost of mapping per unit area is another objective in the present exercise. For want of fully or semi-automatic methods of information extraction from very high resolution remote sensing data, it is imperative that mapping should be carried out in conjunction with some on-site measurements wherever necessary.     

The distribution and geological significance of carbazole compounds in Silurian paleo-pools of the Tarim Basin,Northwest China

The results presented in this paper indicated that the carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has high concentrations and a complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in the study of hydrocarbon migration of the paleo-pools. The difference in the contents of nitrogen compounds in the Silurian dry asphalts from the Awati, Tabei and Tazhong areas is attributed to the difference in the extent of oxidation and （or） bio-degradation for the areas; the Awati and Tabei areas underwent relatively strong oxidation and bio-degradation. During the first stage of hydrocarbon pool formation in the Silurian system in the Tazhong and Tabei areas of the Tarim Basin （at the end of the Silurian period） and at the second stage in the Awati area （in Permian）, the hydrocarbons experienced a long-distance migration.