Upwelling in the Black Sea by the results of numerical experiments and satellite data

The paper analyses results of the numerical simulation of upwelling events in the north-western part of the Black Sea, mostly near the South Crimea. The calculations were performed using a numerical model based on primitive hydrodynamics equations. Emphasis is laid on the case when a salinity front simulating the Black Sea rim current is prescribed in the initial conditions. The interaction of the Black Sea rim current's stream with the coastline and bottom topography leads to the development of an upwelling near the Crimea's coast, even in the absence of wind forcing. The paper discusses the structure of the three-dimensional circulation of waters in the shelf area of the NW Black Sea. Numerical modelling results are matched up with the satellite data obtained by the HRPT receiving station. Translated by Vladimir A. Puchkin.     

The effect of currents on the generation of internal waves by a barotropic tide near an underwater ridge

In the frame of the linear theory for long waves, the paper studies long waves generated by a barotropic tide running at an arbitrary angle over a bottom ridge. The ocean is assumed to be two-layered. In the area of a ridge with a rectangular cross section, geostrophic flows are considered, coupled with the inclinations of the free surface and interface. Wave amplitudes are shown to depend on the angle of an onrunning tide and this allows us to reach a conclusion about the influence of a geostrophic current on the generation of internal waves. Translated by Vladimir A. Puchkin.     

Photoadaptation of carboxylating enzymes and photosynthesis during a spring bloom

Properties of the light saturation curve of photosynthesis and ribulose-1,5-bisphosphate carboxylase (RuBPC) activity are shown to change qualitatively in a natural population of marine phytoplankton during a spring bloom. Evidence is presented to show that these changes constitute photoadapative responses to increasing irradiance. As irradiance increased during the bloom, both the level of light-saturated photosynthesis (P_m) and the initial slope of the light saturation curve (α = photosynthetic efficiency) increased whether those parameters were normalized to chlorophyll a concentration (P_m^b, α^b) or to cell numbers (P_m^c, α^c). The magnitudes of these changes were such that I_k (= P_m/α, the photoadaptation parameter) did not change, but I_m, the light intensity at which photosynthesis becomes saturated, increased. RuBPC activity, both chlorophyll a (RuBPC^b) and cell number normalized (RuBPC^c), also increased during the bloom. We suggest that these adaptations were achieved by simultaneously increasing the number of photosynthetic units, proportionately decreasing the photosynthetic unit size, and increasing both the concentrations of the enzymes of the dark reactions and possibly also of photosynthetic electron transport components.We also observed diminished levels of photoinhibition in the high light adapted cells late in the bloom and have suggested that this was a consequence of the same suite of physiological changes.In situ carbon fixation per cell increased during the bloom whereas no change occurred in this parameter when normalized to chlorophyll a concentration. Although these photoadaptive responses thus permitted carbon to be fixed in situ more rapidly per cell, at a constant efficiency with respect to investment of energy in the photosynthetic apparatus, they did not result in a change in growth rate. Based on consideratios of the role of time scale in physiological adaptation, however, it is suggested that the observed alterations in photosynthesis with increasing irradiance might permit a cell to more rapidly fill an energy quota for division, possibly an advantage in a mixing environment in which energy is patchily distributed, both spatially and temporalyy.Phosphoenolpyruvate carboxylase activity when normalized to chlorophyll a (PEPC^b) did not change during the bloom while chlorophyll a normalized dark carbon fixation decreased sharply and was quantitatively small compared to PEPC^b. On this basis and considering that RuBPC^b increased during the bloom, it is suggested that, although PEPC may be involved in dark carbon fixation, its most important quantitative role is probably an indirect one in light dependent photosynthesis.We have also considered the relevance of laboratory results on photoadaptation to interpretations of field studies and have suggested that batch culture studies must be treated with caution but that turbidistat and semi-continuous methods provide reasonable simulations of natural conditions.     

Sound velocity,density, and related properties along a transect across the Bay of Bengal

Physical properties, sound velocity and density of 95 core samples from ten locations along a transect (parallel to 15°N latitude) across the Bay of Bengal were measured. Results indicate that sound velocities range from 1,482 to 1,679 m/s (av: 1,583 m/s) and densities from 1,338 to 1,757 kg/m³ (av: 1,527 kg/m³). It has been observed that dark colored clays and sandy clays show higher values of sound velocity and density than the average values. A comparative study of the same with that of the sediment cores collected from the Norwegian basin, Mediterranean Sea, and Hatteras, Nares Abyssal plains, western North Atlantic Ocean was done.     

On the sulphur chemistry of a super-anoxic fjord, Framvaren, South Norway

The concentrations of total carbonate (C_t), sulphate, sulphide, thiols and oxygen, the ratio between the stable sulphur isotopes ³⁴S and ³²S in sulphate and sulphide, and the density (used to calculate salinity) were determined on samples from the water column of Framvaren, a superanoxic fjord in southern Norway. From a depth of 18m (the oxic-anoxic boundary) the initial sulphate concentration, ([SO₄]_init), as calculated from salinity, is significantly higher than the sum of the measured sulphur species. This is attributed to a loss of sulphur from the water column. The amount of total carbonate produced, corrected for the initial concentration (C_t - 2.4 Sal/35) is found to be proportional to the amount of sulphate consumed, ([SO₄]_init - [SO₄]), according to the following relation C_t- 2.4 Sal/35 = 1.84 ([SO₄]_init - [SO₄]). Isotopic fractionation caused by bacterial sulphate reduction in the anoxic part of the water column produces sulphide with a δ³⁴S 40‰ lower than the δ³⁴S for sulphate at corresponding depths. The isotopic fractionation also results in δ³⁴S value for the remaining sulphate at depths below 80 m being considerably higher than the mean value for ocean water, which is close to + 20‰. The δ³⁴S values for sulphate at depths between 10 and 50 m were lower than + 20‰ which indicates oxidation of sulphide, which follows upon diffusion of sulphide from deeper parts of the water column and inflow of oxygenated seawater over the sill into the anoxic water of the fjord. A conclusive scenario of the Framvaren sulphur chemistry is presented.     

Mechanisms controlling the temporal variation of the sea ice edge in the Southern Ocean

This paper examines the mechanism controlling the short time-scale variation of sea ice cover over the Southern Ocean. Sea ice concentration and ice velocity datasets derived from images of the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager (SSM/I) are employed to reveal this mechanism. The contribution of both dynamic and thermodynamic processes to the change in ice edge location is examined by comparing the meridional velocity of ice edge displacement and sea ice drift. In the winter expansion phase, the thermodynamic process of new ice production off the ice edge plays an important role in daily advances of ice cover, whereas daily retreats are mostly due to southward ice drift. On the other hand, both advance and retreat of ice edges in the spring contraction phase are mostly caused by the dynamic process of the ice drift. Based on the above mechanism and the linear relation between the degree of ice production at the ice edge and northward wind speed, the seasonal advance of ice cover can be roughly reproduced using the meridional velocity of ice drift at the ice edge.     

The Levant Slumps and the Phoenician Structures: collapse features along the continental margin of the southeastern Mediterranean Sea

Two distinct series of slumps deform the upper part of the sedimentary sequence along the continental margin of the Levant. One series is found along the base of the continental slope, where it overlies the disrupted eastern edge of the Messinian evaporites. The second series of slumps transects the continental margin from the shelf break to the Levant Basin. It seemed that the two series were triggered by two unrelated, though contemporaneous, processes. The shore-parallel slumps were initiated by basinwards flow of the Messinian salt, that carried along the overlying Plio-Quaternary sediments. Seawater that percolated along the detachment faults dissolved the underlying salt to form distinctly disrupted structures. The slope-normal slumps are located on top of large canyons that cut into the pre-Messinian sedimentary rocks. A layer of salt is found in the canyons, and the Plio-Quaternary sediments were deposited on that layer. The slumps are bounded by large, NW-trending faults where post-Messinian faulted offset was measured. We presume that the flow of the salt in the canyons also drives the slope-normal slumps. Thus thin-skinned halokynetic processes generated the composite post-Tortonian structural patterns of the Levant margin. The Phoenician Structures are a prime example of the collapse of a distal continental margin due to the dissolution of a massive salt layer.     

On the relevance of iron adsorption to container materials in small-volume experiments on iron marine chemistry: Fe-aided assessment of capacity, affinity and kinetics

Iron chemistry in seawater has been extensively studied in the laboratory, mostly in small-volume sample bottles. However, little has been reported about iron wall sorption in these bottles. In this paper, radio-iron ⁵⁵Fe was used to assess iron wall adsorption, both in terms of capacity, affinity and kinetics. Various bottle materials were tested. Iron sorption increased from polyethylene/polycarbonate to polymethylmetacrylate (PMMA)/high-density polyethylene/polytetrafluoroethylene to glass/quartz, reaching equilibrium in a 25–70 h period. PMMA was studied in more detail: ferric iron (Fe(III)) adsorbed on the walls of the bottles, whereas ferrous iron (Fe(II)) did not. Considering that in seawater the inorganic iron pool mostly consists of ferric iron, the wall will be a factor that needs to be considered in bottle experiments.The present data indicate that for PMMA with specific surface (S)-to-volume (V) ratio S/V, both iron capacity (42 ± 16 × 10^− 9 mol/m² or 1.7 × 10^− 9 mol/L recalculated for the S/V-specific PMMA bottles used) and affinity (log K_Fe'W = 11.0 ± 0.3 m²/mol or 12.4 ± 0.3 L/mol, recalculated for the S/V-specific PMMA bottles used) are of similar magnitude as the iron capacity and -affinity of the natural ligands in the presently used seawater and thus cannot be ignored.Calculation of rate constants for association and dissociation of both Fe'L (iron bound to natural occurring organic ligands) and Fe'W (iron adsorbed on the wall of vessels) suggests that the two iron complexes are also of rather similar kinetics, with rate constants for dissociation in the order of 10 ⁻⁴–10^− 5 L/s and rate constants for association in the order of 10⁸ L/(mol s). This makes that iron wall sorption should be seriously considered in small-volume experiments, both in assessments of shorter-term dynamics and in end-point observations in equilibrium conditions. Therefore, the present data strongly advocate making use of iron mass balances throughout in experiments in smaller volume set-ups on marine iron (bio) chemistry.     

Chalk shore platform erosion in the vicinity of sea defence structures and the impact of construction methods

Erosion of the intertidal chalk platform in the vicinity of groynes and seawalls is evident to the naked eye along many stretches of the engineered coastline of southeast England, leading to undermining and eventually failure of these structures. However, quantification of the magnitude and spatial extent of the erosion has been difficult to date because of a lack of data about the past elevation of the platform. The application of softcopy photogrammetry makes it possible to recreate past platform elevations from historic air photographs and to compare these with elevations from modern air photographs. Coastal sea defence structures have been installed along the chalk coast east of Brighton at various dates over the past 70 years. During this period, the construction methods have changed from predominantly manual labour to a reliance on heavy machines. The analysis of erosion patterns around structures built since the 1970s using heavy machinery show that surface lowering is 4 to 25 times greater in the vicinity of these structures than across the platform as a whole. In contrast, there is no similar pattern of increased erosion around structures built using predominantly manual labour in the 1930s. A four fold increase in average surface lowering is found also along a vehicle trackway that crosses the mid platform. Depressions developed by enhanced lowering in the front of seawalls generate their own dynamic of increased erosion by trapping pebbles and cobbles that enhance the abrasion of the chalk through bedload transport under standing waves in front of the walls.