Experimental and numerical investigation on coal drawing from thick steep seam with longwall top coal caving mining

Steep coal seam mining activities will frequently occur during the next few decades in China. In this study, both experimental and numerical methods are employed to investigate the coal drawing from thick steep seam with longwall top coal caving mining. A series of analyses is performed to investigate the features of the drawing body, the distribution of top coal recovery ratio and the shape of the rock flow under steep conditions. The results indicate that the drawing body of top coal develops prior to upper side of the panel face obviously, and the top coal in the central part of the panel has a higher recovery ratio than that in the lower and upper parts in steep coal seam with caving mining method. The flow paths of the fragmented top coal are nearly straight lines moving towards the drawing window, and the fastest path maintains a constant angle with the plumb line. The spatial shape of the rock flow indicates “bidirectional asymmetry,” which results from the presence of the shield beam and dip angle of the coal seam; thus, this is the root cause of the appearance of the drawing body’s prior development towards the upper side of the panel. The field observation data indicates the same distribution of top coal recovery as that in the physical experiment and numerical simulation. Furthermore, suggested measurements are proposed to improve top coal recovery in steep seam mining based on the engineering practice of Dayuan coal mine.     

Hydrochemical and statistical studies of the groundwater salinization combined with MODPATH numerical model: case of the Sfax coastal aquifer,Southeast Tunisia

Shallow groundwater is one of the main water resources in the arid and semi-arid regions. However, it is threatened by not only the reduced rainfall and recharge capacity, but also the water table drawdown and seawater intrusion. Such factors could cause a deterioration of the water quality and consequently the loss of a valuable hydraulic resource. This study aimed to improve our knowledge on the groundwater chemical quality evolution of the Sfax shallow aquifer, one of the most vulnerable areas in Tunisia, by developing a geochemical study using statistical and numerical methods. Salinization was identified by factorial analysis, PCA, and hierarchical clustering analysis in addition to the numerical MODPATH model. These findings confirmed that the groundwater quality has deteriorated due to natural and anthropogenic processes with a different influence of mineralization factors. They also revealed the location of seawater intrusion by focusing on the most vulnerable areas which are Chaffar and Djbeniana. Methodologically, the use of MODPATH model for seawater intrusion determination might be considered as the backbone for future studies in Tunisian coastal aquifers. The numerical model supports the results obtained by the geochemical analysis. Both methods are valuable tools as they contribute to trend determinations, management, and recovery plans.     

Ranking of productivity improvement strategies in Iran mineral sector based on integrated SWOT-FAHP-FTOPSIS analysis

The Iran’s mineral sector, as a major supplier of mineral industries, plays a central role on Iran economy. Promoting the productivity in this area leads to the enhancement of the business environment. Also, it can influence the production chain and minerals value added. In this study, a comprehensive study was conducted on the major barriers/drivers factors affecting the efficiency in the mining sector. Furthermore, 16 key factors were identified using the expert views. These parameters are divided into four main categories: strengths, weaknesses, opportunities, and threats. In addition, a hierarchy model was designed in which the mentioned four efficient strategic parameters were implemented and the SWOT analysis was applied, as well as the nine macro strategies were determined. In order to prioritize these strategies, multiple steps were carried out. First, the subfactors were weighted by implementing the fuzzy multi attribute decision-making technique by combining the experts’ views and triangular fuzzy numbers. Subsequently, the strategies were prioritized by employing the group Fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) model. The sensitive analysis of the results presents some minor changes in score of the alternatives, but no alteration was affected in the prioritized strategies. The results revealed the importance of resource allocation strategies related to the existing investments as well as supporting and facilitating the new technology in the mining sector.     

Research on mining-induced deformation and stress,insights from physical modeling and theoretical analysis

The dynamic change of mining-induced stress is the main reason for large deformation of surrounding rock. To investigate the influence of mining-induced stress and deformation is important for appropriate supportive design. It also helps to raise the safety and productivity of longwall mining operations. In this paper, Weijiagou Coal Mine in Southwest China was selected as the case study. In order to research on the deformation and breakage of overlying strata, physical modeling test was carried out on the self-developed rotatable physical similar test system. By using digital image correlation (DIC) technique, the deformation of strata and development of cracks in the process of coal seam excavation were acquired, meanwhile, mining-induced stress was also monitored by pressure cell and strainmeter. According to the mechanical structure of stope, the height of the destressed zone has a significant influence on stress distribution. In order to minimize the discrepancy between the physical model test and theoretical analysis, the dimension of the plastic zone of roadway was added into the mining panel width, and the gap between the experimental and theoretical results reduced.     

Economic potentials of industrial rocks and minerals in the Azraq basin,NE Jordan

The Azraq basin (the Badia region in NE-Jordan) is rich in its industrial rocks and minerals. Most of the commodities are concentrated in one area, which is the Azraq depression (El-Qa’). The climatic changes (wet and dry) of Azraq closed lake contributed in the formation of industrial rocks and minerals in the El-Qa’. Basalt, pyroclastics, zeolites, diatomaceous earth, bentonite, palgorskite, porcelanite, saline brines, chalk, limestone, and gypsum are the potential industrial commodities. The basaltic rocks are of high alkalis content and good homogeneity and are of good potential use in constructions and cast basalt. The scoriaceous pyroclastic material proved to be of excellent properties for use as lightweight aggregates, cultivation purposes, and for the production of pozzolanic cement. Smectite-rich beds (bentonite) from Ein El Badia could be used as binder, absorbent, and additives for feeding farm animals. Palygorskite is potential for use in drilling mud, paint, pharmaceuticals, and as a filtering medium. The diatomaceous earth deposits are Moler type and could be used as filter aid and absorbent. Zeolites are efficient for agricultural purposes, animal waste, and wastewater treatment plants. Saline brine is exploited in the Azraq mudflat area for table salt. Porcelanite could be used as an absorbent of hazardous elements, abrasive, and filler. The softness and high purity of chalk enable its use as filler and in the lime production. The large limestone concretions are of high quality for use as a building stone. Gypsum (gypcrete) could be used after the removal of the undesired chert impurities. The Badia region is a highly potential area for future exploration and mining industry in a manner that achieves the required outcomes and minimizes impacts on ecosystems.     

Precipitation rate climatology related to different cloud types using satellite imagery over Iran

Cloud types have a substantial influence on precipitation. This paper presents a study of the monthly variations of daytime different cloud types over Iran using data collected from Moderate-resolution Imaging Spectroradiometer (MODIS) aboard Terra during 2001–2015, MODIS aboard Aqua during 2002–2015, International Satellite Cloud Climatology Project (ISCCP) H-series cloud type data during 2001–2009 and precipitation rate associated with different cloud types using Tropical Rainfall Measuring Mission (TRMM) satellite products during 2001–2009. Different cloud types were determined using MODIS cloud optical thickness and cloud top pressure data based on ISCCP algorithm. The results showed that stratocumulus and cumulus clouds have maximum occurrence frequency over marine areas especially southern seas. The maximum frequency of nimbostratus and deep convective occurrence occurred over mountainous regions particularly at the time of Aqua overpass and cirrus and cirrostratus are observed over southeast of Iran during warm months due to monsoon system. Altostratus cloud is extended in each month except January, at the time of Terra overpass while nimbostratus is seen at the time of Aqua overpass during warm months in the study area. Cumulus and altocumulus clouds have shown remarkable frequency in all months especially over marine regions during warm and fall months. The higher value of precipitation rate is related to altostratus with a rate approximately 7 mm/h at the time of Terra overpass during April. Altostratus has the maximum recorded precipitation rate except in Nov., Dec., Sep., and Jan. at the time of Terra overpass, whereas the maximum precipitation rate is linked to nimbostratus cloud activity (up to 5 mm/h) except for March, April, and Sep. at the time of Aqua overpass. Deep convective (up to 1.32 mm/h), cirrostratus (up to 1.11 mm/h), and cirrus (0.02 mm/h) are observed only in warm months. The results were compared with ISCCP cloud types so that precipitation rate classified from low to high and Spearman rank correlation was calculated. The results showed good agreement between these two cloud type data; however, there were few notable difference between them.     

Style and timing of tectonic deformation across the Bou Arada-El Fahs troughs system,Northeast Tunisia: integration in the structural evolution of Atlas fold and thrust belt

The Bou Arada-El Fahs troughs system is a particularly E-W trending collapsed structure with the manifestation of normal-to-strike-slip faults. A combined multi-source and multi-scalar structural and geophysical investigation provides important insights on the geometry and the kinematics evolution of trough systems in the Atlas of Tunisia. New data, as well as a reappraisal of available data show that the studied troughs system is established during three main successive events: the Oligocene-Miocene, the Tortonian, and the Plio-Quaternary events. The goal of this paper is to present the structural evolution of the study area, on a pre-structured substratum. The structural evolution progressed from an extensional event, manifested by the formation of grabens, passing by an episode of reactivation of faults related troughs in strike-slip motion during the Atlas compression accompanied by an en-échelon folding in foot wall and hanging wall. These results acquired and presented in the following order: We will initially present the geological context by integrating and correlating the lithostratigraphic data. We continue by examining the geometry and kinematics of structure-related troughs via the detailed geological mapping, the interpretation of available 2D seismic data, and the interpretation of processed fault slip data. This integrated geological and geophysical study allows a better understanding of the BETS, and makes it possible to propose a new geometrical and kinetic model of the establishment of trough structure in the Tunisian Atlas.     

Heavy metals in mangrove sediments of the central Arabian Gulf shoreline,Saudi Arabia

To assess heavy metals in mangrove swamps of Sehat and Tarut coastal areas along the Arabian Gulf, 18 sediment samples were collected for Al, V, Cr, Mn, Cu, Zn, Cd, Pb, Hg, Sr, As, Fe, Co, and Ni analysis. The results indicated that the distribution of some metals was largely controlled by anthropogenic inputs, while others were of terrigenous origin and most strongly associated with distribution of aluminum and total organic carbon in sediments. Mangrove sediments were extremely severe enriched with Sr (EF?=?67.59) and very severe enriched with V, Hg, Cd, Cu, As (EF?=?44.28, 37.45, 35.77, 25.97, and 11.53, respectively). Average values of Sr, V, Hg, Cd, Cu, Ni, As, and Cr were mostly higher than the ones recorded from the Mediterranean Sea, the Red Sea, the Gulf of Aqaba, the Caspian Sea, the Arabian and Oman gulfs, coast of Tanzania, sediment quality guidelines, and the background shale and the earth crust. Landfilling due to coastal infrastructure development around mangrove forests, oil spills and petrochemical and desalination effluents from Al-Jubail industrial city to the north were the anthropogenic activities that further enhanced heavy metals in the studied mangrove sediments.     

Geothermal energy potential of Tulsishyam thermal springs of Gujarat,India

Tulsishyam thermal springs are located in the Saurashtra region of Gujarat, India with discharge temperatures varying from 39 to 42 °C. The pH of these thermal springs varies from 7.1 to 7.4, indicating neutral character. Though these thermal springs propagate through the near surface layer of Deccan basalt, detailed geochemical analysis of the thermal waters using Piper diagram suggests that the water is interacting with the granitic basement rock. Silica and cation geothermometry estimates have reservoir temperature in the range of 138 to 207 °C categorizing it into a low to moderate enthalpy geothermal system. Furthermore, the area has high heat flow values of 53–90 mW/m² because of shallow Moho depth. The prevailing conditions suggest that the geothermal energy can potentially be exploited through an enhanced geothermal system (EGS). The study also indicates different mineral phases that may precipitate out of water during exploitation of geothermal energy and it should be taken into account while designing an EGS for the area.