Geostatistical analysis of ground‐survey elevation data to elucidate spatial and temporal river channel change

A digital elevation model (DEM) of a fluvial environment represented landform surface variability well and provided a medium for monitoring morphological change over time. Elevation was measured above an arbitrary datum using a ground‐based three‐dimensional tacheometric survey in two reaches of the River Nent, UK, in July 1998, October 1998 (after flood conditions) and June 1999. A detailed geostatistical analysis of the elevation data was used to model the spatial variation of elevation and to produce DEMs in each reach and for each survey period. Maps of the difference in elevation were produced and volumetric change was calculated for each reach and each survey period. The parameters of variogram models were used to describe the morphological character of each reach and to elucidate the linkages between process and the form of channel change operating at different spatial and temporal scales. The analysis of channel change on the River Nent shows the potential of geostatistics for investigating the magnitude and frequency of geomorphic work in other rivers. A flood modified the channel features, but low magnitude and high frequency flows rationalized the morphology. In spite of relatively small amounts of net flux the channel features changed as a consequence of the reworking of existing material. The blocking of chute entrances and redirection of the channel had a considerable effect on the behaviour of the channel. Such small changes suggested that the distributary system was sensitive to variation in sediment regime. Plots of the kriging variances against sampling intervals were used to quantify the temporal variation in sampling redundancy (ranging between ?11 per cent and +93 per cent). These curves illustrated the importance of bespoke sampling designs to reduce sampling effort by incorporating anisotropic variation in space and geomorphic information on flow regime. Variation in the nugget parameter of the variogram models was interpreted as sampling inaccuracy caused by variability in particle size and is believed to be important for future work on surface roughness. Copyright © 2003 John Wiley & Sons, Ltd.     

Land Cover, Rainfall and Land-Surface Albedo in West Africa

Land surface albedo is an important variable in General Circulation Models (GCMs). When land cover is modified through anthropogenic land use, changes in land-surface albedo may produce atmospheric subsidence and reduction of rainfall. In this study we examined albedo time series and their relationships with rainfall, land cover, and population in West Africa. This particular region was selected because it has become a focal point in debates over biophysical impacts of desertification and deforestation. Our analyses revealed that albedo and rainfall were related only modestly at short time scales (monthly and annual) and that mean annual albedo values remained relatively stable from 1982–1989 over a widerange of climatic and vegetation zones in West Africa. The relationship between long-term mean rainfall and mean albedo was strong and curvilinear(r² = 0.802). The same was true for the relationship betweenpercent tree cover and mean albedo (r² = 0.659). These results suggest that long-term climate patterns, which control vegetation type and canopy structure, have greater influence on albedo than short-term fluctuations in rainfall. Our results reinforce other recent studies based on satellite data that have questioned the extent and pervasiveness of desertification in West Africa.     

The JCMT Legacy Survey of the Gould Belt: a first look at Orion B with HARP

The Gould Belt Legacy Survey will survey nearby star-forming regions (within 500 pc), using Heterodyne Array Receiver Programme (HARP), Submillimetre Common-User Bolometer Array 2 and Polarimeter 2 on the James Clerk Maxwell Telescope. This paper describes the initial data obtained using HARP to observe ¹²CO, ¹³CO and C¹⁸O   J = 3 → 2  towards two regions in Orion B, NGC 2024 and NGC 2071. We describe the physical characteristics of the two clouds, calculating temperatures and opacities utilizing all the three isotopologues. We find good agreement between temperatures calculated from CO and from dust emission in the dense, energetic regions. We determine the mass and energetics of the clouds, and of the high-velocity material seen in ¹²CO emission, and compare the relative energetics of the high- and low-velocity material in the two clouds. We present a clumpfind analysis of the ¹³CO condensations. The slope of the condensation mass functions, at the high-mass ends, is similar to the slope of the initial mass function.     

International Heliophysical Year: GPS Network in Africa

The main scientific objectives of the International Heliophysical Year are to discover and study all the physical processes coupling the Earth to the Sun. During the IHY a number of scientific instruments are being deployed all over the world. This brief report presents the scientific objectives, the GPS receiver network over Africa and the long lasting research planned for the next decades in Africa.     

Structural characterization of terrestrial microbial Mn oxides from Pinal Creek, AZ

The microbial catalysis of Mn(II) oxidation is believed to be a dominant source of abundant sorption- and redox-active Mn oxides in marine, freshwater, and subsurface aquatic environments. In spite of their importance, environmental oxides of known biogenic origin have generally not been characterized in detail from a structural perspective. Hyporheic zone Mn oxide grain coatings at Pinal Creek, Arizona, a metals-contaminated stream, have been identified as being dominantly microbial in origin and are well studied from bulk chemistry and contaminant hydrology perspectives. This site thus presents an excellent opportunity to study the structures of terrestrial microbial Mn oxides in detail. XRD and EXAFS measurements performed in this study indicate that the hydrated Pinal Creek Mn oxide grain coatings are layer-type Mn oxides with dominantly hexagonal or pseudo-hexagonal layer symmetry. XRD and TEM measurements suggest the oxides to be nanoparticulate plates with average dimensions on the order of 11 nm thick × 35 nm diameter, but with individual particles exhibiting thickness as small as a single layer and sheets as wide as 500 nm. The hydrated oxides exhibit a 10-Å basal-plane spacing and turbostratic disorder. EXAFS analyses suggest the oxides contain layer Mn(IV) site vacancy defects, and layer Mn(III) is inferred to be present, as deduced from Jahn-Teller distortion of the local structure. The physical geometry and structural details of the coatings suggest formation within microbial biofilms. The biogenic Mn oxides are stable with respect to transformation into thermodynamically more stable phases over a time scale of at least 5 months. The nanoparticulate layered structural motif, also observed in pure culture laboratory studies, appears to be characteristic of biogenic Mn oxides and may explain the common occurrence of this mineral habit in soils and sediments.     

Estimating selenium removal by sedimentation from the Great Salt Lake,Utah

The mass of Se deposited annually to sediment in the Great Salt Lake (GSL) was estimated to determine the significance of sedimentation as a permanent Se removal mechanism. Lake sediment cores were used to qualitatively delineate sedimentation regions (very high to very low), estimate mass accumulation rates (MARs) and determine sediment Se concentrations. Sedimentation regions were defined by comparison of isopach contours of Holocene sediment thicknesses to linear sedimentation rates determined via analysis of ²¹⁰Pb, ²²⁶Ra, ⁷Be and ¹³⁷Cs activity in 20 short cores (<5 cm), yielding quantifiable results in 13 cores. MARs were developed via analysis of the same radioisotopes in eight long cores (>10 cm). These MARs in the upper 1–2 cm of each long core ranged from 0.019 to 0.105 g_sed/cm²/a. Surface sediment Se concentrations in the upper 1 or 2 cm of each long core ranged from 0.79 to 2.47 mg/kg. Representative MARs and Se concentrations were used to develop mean annual Se removal by sedimentation in the corresponding sedimentation region. The spatially integrated Se sedimentation rate was estimated to be 624 kg/a within a range of uncertainty between 285 and 960 kg/a. Comparison to annual Se loading and other potential removal processes suggests burial by sedimentation is not the primary removal process for Se from the GSL.     

Change of collision efficiency with distance in bacterial transport experiments

Understanding the mechanisms of bacterial transport in aquifers is important in developing bioremediation strategies. Collision efficiency (alpha) is one important parameter used in modeling bacterial transport. This study was undertaken to measure change in alpha with distance by performing a bacterial transport experiment in Oyster, Virginia. Following injection of a bacterium, Comamonas sp., into a well, water samples were collected at various distances along the flowpath and injected into columns packed with homogenized South Oyster focus area sediment. Zeta potentials of the bacteria in the samples were measured. Values of alpha were determined at various locations in the field in two ways: based on field breakthrough concentrations at the sampling points and based on column breakthrough concentrations. The alpha values estimated from field breakthrough decreased with distance, whereas those estimated from column breakthrough increased with distance. Bacterial cell surface charge became progressively more negative with distance in the field. We hypothesize that the apparent contradiction between field and column alpha values was caused by differences in the flow of the two systems. Flow in the columns was forced to occur through fine-grained zones of iron and aluminum hydroxide coatings that selectively removed the most negatively charged bacteria. In contrast, in the field, the injected cells did not come into contact with the positively charged coatings because the bulk solution bypassed them due to heterogeneous hydraulic properties. These results suggest that laboratory-based models may underestimate bacterial transport distance in the field. A more realistic approach may be necessary to capture the degree of heterogeneity.     

The Spey Bay geomorphological study

The Spey Bay coastline and the estuary of the River Spey exhibit a rapidly evolving planform. They provide an opportunity to study geomorphological changes in a coupled coastal/estuarine system which can be measured over hours and days rather than the years and decades associated with more slowly evolving landscape features. Attempting to understand coastal and estuarine geomorphology provides engineers and earth scientists with an exciting intellectual challenge. This is not, however, simply an academic challenge because the successful management of coastal and estuarine environments depends on improving this understanding. The impetus behind our work in this area is the protection of land-use interests. It is in this context that Babtie Dobbie Limited have been employed in studying the River Spey since 1962. This paper is based on a practical case study performed for coastal and river engineering purposes between 1990 and 1992. The case study was formulated using the results and conclusions of earlier geomorphological studies of the area undertaken over the past 32 years. Knowledge gained from previous studies was crucial in designing the detailed methods and techniques employed in the 1990–1992 geomorphological study. Methods used included historical analyses, photogrammetry, numerical modelling, geographic information systems (GIS) and interpretation of the complex processes which drive landform changes in the estuary and along the adjacent shoreline. The improved understanding of geomorphological processes that has been achieved has enabled engineers to formulate a new management strategy. Central to this strategy are engineering solutions to river and coastal stability and flooding problems which are in sympathy with the environment and which take maximum advantage of our understanding of geomorphological processes.