Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

Controls on porphyroblast size along a regional metamorphic field gradient

Garnet-bearing schists from the Waterville Formation of south-central Maine provide an opportunity to examine the factors governing porphyroblast size over a range of metamorphic grade. Three-dimensional sizes and locations for all garnet porphyroblasts were determined for three samples along the metamorphic field gradient spanning lowest garnet through sillimanite grade, using high-resolution X-ray computed tomography. Comparison of crystal size distributions to previous data sets obtained by stereological methods for the same samples reveals significant differences in mode, mean, and shape of the distributions. Quantitative textural analysis shows that the garnets in each rock crystallized in a diffusion-controlled nucleation and growth regime. In contrast to the typical observation of a correlation between porphyroblast size and position along a metamorphic field gradient, porphyroblast size of the lowest-grade specimen is intermediate between the high- and middle-grade specimens’ sizes. Mean porphyroblast size does not correlate with peak temperatures from garnet-biotite Fe-Mg exchange thermometry, nor is post-crystallization annealing (Ostwald Ripening) required to produce the observed textures, as was previously proposed for these rocks. Robust pseudosection calculations fail to reproduce the observed garnet core compositions for two specimens, suggesting that these calc-pelites experienced metasomatism. For each of these two specimens, Monte Carlo calculations suggest potential pre-metasomatism bulk compositions that replicate garnet core compositions. Pseudosection analyses allow the estimation of the critical temperatures for garnet growth: ∼481, ∼477, and ∼485°C for the lowest-garnet-zone, middle-garnet-zone, and sillimanite-zone specimens, respectively. Porphyroblast size appears to be determined in this case by a combination of the heating rate during garnet crystallization, the critical temperature for the garnet-forming reaction and the kinetics of nucleation. Numerical simulations of thermally accelerated, diffusion-controlled nucleation, and growth for the three samples closely match measured crystal size distributions. These observations and simulations suggest that previous hypotheses linking the garnet size primarily to the temperature at the onset of porphyroblast nucleation can only partially explain the observed textures. Also important in determining porphyroblast size are the heating rate and the distribution of favorable nucleation sites.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

北黄海长山群岛海域沉积环境初步研究

本文在获取１９８９－１９９３年黄海北部长山群岛海域沉积物大量数据基础上，借助沉积物粒度分析（Ｑ型），揭示出该海域具有在“岛屿效应”影响下的４种环境能量类型，分析了与其适应的环岛沉积环境及其分布特征。     

Uncertainty as the overlap of alternate conditional distributions

An important task in modern geostatistics is the assessment and quantification of resource and reserve uncertainty. This uncertainty is valuable support information for many management decisions. Uncertainty at specific locations and uncertainty in the global resource is of interest. There are many different methods to build models of uncertainty, including Kriging, Cokriging, and Inverse Distance. Each method leads to different results. A method is proposed to combine local uncertainties predicted by different models to obtain a combined measure of uncertainty that combines good features of each alternative. The new estimator is the overlap of alternate conditional distributions.     

Origin of a large breccia-vein system in the Sanerlin uranium deposit, southern China: a reinterpretation

The early Tertiary Sanerlin uranium deposit is located near the southwestern margin of the Chaling-Yongxing pull-apart basin defined by the Chaling-Yongxing and Chenxian-Linwu sinistral strike-slip faults in southern China. The uranium ores are hosted in 15 breccia-vein bodies, which are separately located in the cores of three secondary anticlines of the Upper Permian Dangchong Formation. Individual breccia-vein bodies are composed of fragments of silicified shale and sandstone from the Dangchong Formation, and quartz veinlets as cements. These fragments, together with quartz veins, form a mosaic texture. Hydrothermal pitchblende is the only commercial uranium mineral, mainly occurring as disseminated grains within quartz veins or coating fragments. Other metallic minerals include molybdenite, pyrite, chalcopyrite, galena, sphalerite, and red microcrystalline hematite. Fluid inclusions in quartz veins have homogenization temperatures ranging from 150 to 280 °C, and calculated salinity values between 5.6 and 13.4 wt% NaCl equivalent. Stable isotope analyses show that the mineralizing fluid was characterized by '¹⁸O values of -2.2 to +2.6‰ and 'D_H2O values of -134 to -110‰. These analytical data demonstrate that hydrothermal fluids were mainly derived from formation waters (brines) of the Chaling-Yongxing basin. Fluid overpressuring was caused by an abnormal geothermal gradient and impermeable shales in the deposit area. The geometry, texture, and structure of the breccia-vein system, along with the fluid pressure estimates, suggest that hydraulic fracturing generated the mineralized breccia-vein system. Pitchblende and associated minerals were deposited when gaseous phases were released abruptly from the ore fluids due to the hydraulic fracturing.     

Kosa (yellow sand) components in precipitation collected at central Japan

In east Asia, acidic gases derived from fossil fuel combustion have increased in the past decades. On the other hand, the Asian dust, also called Kosa (yellow sand) is transported following windstorms from arid lands in the Asian continent. Many researchers have been interested in the reaction between acidic aerosols and Kosa aerosols as well as the long-range transport of these emissions. To investigate the characteristics of chemical components in precipitation on a long-term basis over Japan, precipitation was sequentially collected from April 1984 to March 1997 at Kanazawa located near the coast of the Sea of Japan. Precipitation samples were collected at 1 mm intervals for the first 5 mm rainfall and all volume of rainwater after 6 mm for all precipitation events with an automatic wet only precipitation collector. According to the analyses of precipitation including Kosa aerosols during Kosa periods, the reaction in the air between Kosa and acidic components during the long-range transport was discussed.     

试述福建顺昌南舟萤石矿地质特征

顺昌南舟萤石矿位于顺昌县埔上镇南舟村境内，1996年福建省区域地质调查队开展1：5万埔上幅区调时发现矿体，后开展普查工作表明该矿床规模大、交通方便，易于开采，现已投入开发利用。南舟萤石矿成矿地质特征在闽北丰富的萤石资源中具有一定代表性。