Floodplain sedimentation rates in an alpine watershed determined by radionuclide techniques

Vertical profiles of the activities of ¹³⁷Cs and ²¹⁰Pb were measured on floodplain sediment cores and upland soil cores along the Soda Butte Creek and the Yellowstone River to determine floodplain sedimentation rates. The position of mine tailings from a 1950 impoundment failure was used as a stratigraphic marker to estimate the sedimentation rates and to make comparisons with rates provided by radionuclide‐based methods. Mass accumulation (sedimentation) rates calculated from the position of the mine tailings ranged from 0·00 to 0·17 g cm^?2 yr^?1 and were in good agreement with sedimentation rates calculated from the inventories of ¹³⁷Cs and ²¹⁰Pb. Sedimentation rates calculated from the position of the ¹³⁷Cs peak generally overestimated the sedimentation rates, probably because of increased downward migration of ¹³⁷Cs caused by the low pH of water moving through the mine tailings or the high permeability of floodplain sediments relative to upland reference soils. This study demonstrates that the ¹³⁷Cs and ²¹⁰Pb inventory methods for determining sedimentation rates can be applied to an alpine floodplain where sedimentation events are episodic and where orographic effects on precipitation generate strong downstream gradients in the delivery of atmospheric radionuclides. Copyright © 2007 John Wiley & Sons, Ltd.     

Imaging spectrometer study of Jupiter and Saturn

Observations with a new near infrared imaging spectrometer with ～15 Å resolution are presented. Twelve spectral images of Saturn in the vicinity of the 8900 Å CH₄ absorption complex were obtained and their interpretation discussed. Spectral images of Jupiter were also obtained and several of these at widely separated wavelengths were subjected to a Minnaert analysis.     

A paleolimnological record of Holocene climate and environmental change in the Temagami region,northeastern Ontario

The Arcellacean (Thecamoebian) fauna was assessed in five Holocene sediment cores obtained from James and Granite lakes in the Temagami region of northeastern Ontario. In addition, palynological analysis was carried out on two of these cores, one each from James and Granite lakes. The first indication of postglacial colonization by plants was the appearance of rare Cupressaceae pollen, dated to 10,800 yr BP. Plant diversity began to increase by 10,770 yr BP when Pinus spp. and Larix migrated into the area. The first appearance of arcellaceans occurred after 9650 yr BP in assemblages dominated by Centropyxis constricta and opportunistic Centropyxis aculeata. High abundances of charophytes in the cores until 8800 yr BP indicated that macroalgae were proliferating at this time. This deposition is interpreted to have occurred during the draining of an ice-marginal lake following the retreat of the Laurentide Ice Sheet. Based on pollen analysis, warmer conditions associated with the Holocene Hypsithermal prevailed in the area from 6250 to 4115 yr BP. The stable, open Great Lakes – St. Lawrence type forest that developed here at the beginning of the Hypsithermal continues to prevail to the present. The periodic colonization of the lake by beavers (Castor canadensis) acted as a control on water-level and eutrophication through the Holocene. Evidence of eutrophication was indicated in the core samples by the abundance of high levels of the alga Pediastrum and the arcellacean Cucurbitella tricuspis. Eutrophication periodically developed when beavers dammed a site, causing the rate of flow in drainage streams to slow and stagnant conditions occurred. When the site became depleted of the nearby trees, which were preferred by beaver (Betula, Alnus and Populus), the dam would be abandoned, causing the water-level to drop. Stagnant conditions were reduced as flow levels increased, reducing eutrophication and resulting in recovering forest stands. In addition, the lowering water levels would result in encroachment of the forest along the lake shore. This cycle occurred many times in the history of this lake as indicated by fluctuations in the size of arcellacean populations.     

Micromechanical modeling for rate‐dependent behavior of salt rock under cyclic loading

The dependence of rock behavior on the deformation rate is still not well understood. In salt rock, the fundamental mechanisms that drive the accumulation of irreversible deformation, the reduction of stiffness, and the development of hysteresis during cyclic loading are usually attributed to intracrystalline plasticity and diffusion. We hypothesize that at low pressure and low temperature, the rate‐dependent behavior of salt rock is governed by water‐assisted diffusion along grain boundaries. Accordingly, a chemo‐mechanical homogenization framework is proposed in which the representative elementary volume (REV) is viewed as a homogeneous polycrystalline matrix that contains sliding grain‐boundary cracks. The slip is related to the mass of salt ions that diffuse along the crack surface. The relationship between fluid inclusion‐scale and REV‐scale stresses and strains is established by using the Mori–Tanaka homogenization scheme. It is noted from the model that a lower strain rate and a larger number of sliding cracks enhance stiffness reduction and hysteresis. Thinner sliding cracks (i.e., thinner brine films) promote stiffness reduction and accelerate stress redistributions. The larger the volume fraction of the crack inclusions, the larger the REV deformation and the larger the hysteresis. Results presented in this study shed light on the mechanical behavior of salt rock that is pertinent to the design of geological storage facilities that undergo cyclic unloading, which could help optimize the energy production cycle with low carbon emissions.     

Experimental Study of the Brittle Behavior of Clay shale in Rapid Unconfined Compression

The mechanical behavior of clay shales is of great interest in many branches of geo-engineering, including nuclear waste disposal, underground excavations, and deep well drilling. Observations from test galleries (Mont Terri, Switzerland and Bure, France) in these materials have shown that the rock mass response near the excavation is associated with brittle failure processes combined with bedding parallel shearing. To investigate the brittle failure characteristics of the Opalinus Clay recovered from the Mont Terri Underground Research Laboratory, a series of 19 unconfined uniaxial compression tests were performed utilizing servo-controlled testing procedures. All specimens were tested at their natural water content with loading approximately normal to the bedding. Acoustic emission (AE) measurements were utilized to help quantify stress levels associated with crack initiation and propagation. The unconfined compression strength of the tested specimens averaged 6.9 MPa. The crack initiation threshold occurred at approximately 30% of the rupture stress based on analyzing both the acoustic emission measurements and the stress–strain behavior. The crack damage threshold showed large variability and occurred at approximately 70% of the rupture stress.     

Numerical investigation of the seakeeping behavior of a catamaran advancing in regular head waves

A numerical study was undertaken in order to assess the capability of an unsteady RANS code to predict the seakeeping characteristics of a high-speed multi-hull vessel in high sea states. Numerical analysis includes evaluation of ship motions, effects of wave steepness on ship response, catamaran natural frequency and added resistance in waves. Computations were performed for the DELFT 372 catamaran by the URANS solver CFDSHIP-Iowa V.4. The code was validated with encouraging results for high ship speeds (0.3≤Fn≤0.75) and high wave amplitudes (0.025≤Ak≤0.1). Comparison with strip theory solutions shows that the RANS method predicts ship motions with higher accuracy and allows the detection of nonlinear effects. Current computations evidence that heave peaks occur at resonance for all Fn, and reach the absolute maximum at Fn=0.75. Maximum pitch occurs at frequencies lower than resonance, for each speed, and absolute maximum occurs at medium Fn=0.6. Maximum added resistance, R_aw, was computed at Fn=0.45, which, interestingly, is near the catamaran Fn_coincidence. Overall, we found similar results as Simonsen et al. (2008) for KCS containership, though, herein, a multi-hull geometry and higher speeds were tested. Also, our results are useful to further evaluate the exciting forces and their correlation with f_e and λ/L_pp.