Lunar structure and dynamics - results from the apollo passive seismic experiment

Analysis of seismic signals from man-made impacts, moonquakes, and meteoroid impacts has established the presence of a lunar crust, approximately 60 km thick in the region of the Apollo seismic network; an underlying zone of nearly constant seismic velocity extending to a depth of about 1000 km, referred to as the mantle; and a lunar core, beginning at a depth of about 1000 km, in which shear waves are highly attenuated suggesting the presence of appreciable melting. Seismic velocitites in the crust reach 7 km s^–1 beneath the lower-velocity surface zone. This velocity corresponds to that expected for the gabbroic anorthosites found to predominate in the highlands, suggesting that rock of this composition is the major constituent of the lunar crust. The upper mantle velocity of about 8 km s^–1 for compressional waves corresponds to those of terrestrial olivines, pyroxenites and peridotites. The deep zone of melting may simply represent the depth at which solidus temperatures are exceeded in the lower mantle. If a silicate interior is assumed, as seems most plausible, minimum temperatures of between 1450°C and 1600°C at a depth of 1000 km are implied. The generation of deep moonquakes, which appear to be concentrated in a zone between 600 km and 1000 km deep, may now be explained as a consequence of the presence of fluids which facilitate dislocation. The preliminary estimate of meteoroid flux, based upon the statistics of seismic signals recorded from lunar impacts, is between one and three orders of magnitude lower than previous estimates from Earth-based measurements.Paper dedicated to Professor Harold C. Urey on the occasion of his 80th birthday on 29 April, 1973.     

Dispersion and stability of waves in plasmas in the presence of a coriolis force

The dispersion law for the propagation of waves in cold magnetized plasmas is derived for arbitrary directions of the rotation axis with respect to the static magnetic field. The waves are shown to be stable, not only in the case of a cold plasma, but in any plasma case which yields hermitian mobility tensors. An interesting special case is when the rotation and magnetization axes are parallel, because then for suitable values of rotation and external magnetic field the two effects can cancel each other, though only for one plasma species at the time. The rotation thus decisively affects and shifts the number and width of the existing pass- and stop-bands in a magnetized plasma. The inclusion of thermal effects through a scalar barotropic pressure is not nearly as significant.     

A comparison between compton-synchrotron and Compton black-body emission in radio sources

A simple relation between observational parameters of radiosources that allows to state the predominance in the X-ray emission of either the Compton-synchrotron or the Compton black-body effect is derived.The obtained results suggest that the Compton-synchrotron contribution is dominant in compact radiosources.Operated by the CNICT with the participation of the University of Buenos Aires and the Comisión Nacional de Estudios Geoheliofísicos.     

Observations of the inner F and K coronas below λ2220

The inner coronal continuum has been observed and measured below 2220 on the slitless spectra obtained by Speer et al. (1970) at the 7 March 1970 eclipse. These observations set some constraints on the brightness of the inner F corona and hence on the scattering efficiency of the inner interplanetary dust cloud particles in the far ultraviolet. They neither confirm nor reject the possibility that the inner dust cloud has the same sharp upturn in scattering efficiency below 2000 observed in the zodiacal light and in the interstellar medium.On leave from Imperial College, London.This work was supported in part by NASA grant NGL 12-001-011. An I.A.U. travelgrant to one of us (R.J.S.) is gratefully acknowledged.     

Modification Of The Standard ∈-Equation For The Stable Abl Through Enforced Consistency With Monin–Obukhov Similarity Theory

A condition is derived for consistency of the standard-equation with Monin–Obukhov (MO) similarity theory of thestably-stratified surface layer. The condition is derivedby extending the procedure used to derive the analogous condition forneutral theory to stable stratification. It is shown that consistencywith MO theory requires a function of flux Richardson number, Ri_f, to be absorbed into either of two closure parameters, c ₁ or c ₂.Inconsistency, on the other hand, results if constant values of these are maintained for all Ri_f, as is done in standardapplication of the equation, and the large overpredictions ofturbulence found in such application to the one-dimensionalstable atmospheric boundary layer (1D-SBL) are traced to thisinconsistency. Guided by this, we formulate a MO-consistent-equation by absorbing the aforementioned function intoc ₁, and combine this with a Level-2.5 second-orderclosure model for vertical eddy viscosity and diffusivities.Numerical predictions of the 1D-SBL by the modified model converge to a quasi-steady state, rectifying the predictive failure of the standard -equation for the case.Quasi-steady predictions of non-dimensional variables agree stronglywith Nieuwstadt's theory. Qualitative accuracy of predictionsis inferred from comparisons to field data, large-eddy simulationresults and Rossby-number similarity relationships.     

A methodology to estimate renewal time scales in estuaries: the Tagus Estuary case

High-resolution hydrodynamic models are a common tool to simulate water dynamics in estuaries. Results from these models are, however, difficult to interpret without the aid of additional parameters to integrate the information. In this paper a methodology to understand the transport patterns in the Tagus Estuary is proposed. It is based on the computation of two renewal time scales: residence time and integrated water fraction. This last parameter is used to build a dependency matrix that gives the integrated influence of each region of the estuary at a selected point. The parameters are computed using a Lagrangian transport model coupled to the hydrodynamic model. Results show that Tagus Estuary has two different types of regions: the central part of the estuary, with low renewal efficiency, and three regions with higher renewal efficiency. Renewal mechanisms are, however, different for each region as shown by the dependency matrix. Comparison of renewal time scales with results from a water-quality model revealed that residence time is not a limiting parameter for primary production in the Tagus Estuary.Responsible Editor: Hans Burchard     

Mineral-scale Sr-isotope constraints on magma evolution and chamber dynamics in the Rum layered intrusion,Scotland

Sr isotopic zoning within single plagioclase crystals from rocks from Unit 9 of the Rum layered intrusion is used to infer events during crystal growth in a magma undergoing contamination. The ⁸⁷Sr/⁸⁶Sr diversity among minerals and between cores and rims of plagioclase crystals increases as the boundary between unit 9 and the overlying Unit 10 peridotite is approached. Models of near-solidus interaction of the cumulate with a fluid or melt, or large scale textural re-equilibration, cannot easily account for the systematic differences in ⁸⁷Sr/⁸⁶Sr between small crystals and the rims of larger crystals.We propose a simple interpretation in which crystal growth is concentrated along the cool margins of the reservoir. Crystals are subsequently advected to a site of accumulation at the base of the reservoir, probably by episodic plume-like dense downwellings allowing mixing of isotopically zoned and unzoned crystals.If the core-rim isotope variations are inherited from primary magmatic growth, then the small distances over which they are now preserved (1–2 mm) place constraints on the minimum cooling rate of the intrusion. Although the length scale of diffusive equilibration is influenced by a number of poorly-constrained variables (starting temperature, feldspar composition, temperature-time path) cooling was clearly very rapid with cooling to effective closure (~1,000 °C) within a few thousand years.Editorial responsibility: I. Parsons     

Adakite-like signature of Late Miocene intrusions at the Los Pelambres giant porphyry copper deposit in the Andes of central Chile: metallogenic implications

Adakite-like features are recognized in the Late Miocene (~10 Ma) porphyritic intrusions of the Los Pelambres giant porphyry copper deposit, central Chile (32°S). Located within the southern portion of the flat-slab segment (28–33°S) of the Chilean Andes, the Al- and Na-rich porphyries of Los Pelambres display distinctly higher Sr/Y (~100–300) and La_N/Yb_N (~25–60) ratios than contemporaneous and barren magmatic units (e.g., La Gloria pluton, Cerro Aconcagua volcanic rocks) of the same Andean magmatic belt. Strong fractionation of heavy rare earth elements (HREE), absence of Eu anomalies, high Sr/Y and Zr/Sm and low Nb/Ta ratios suggest melt extraction from a garnet-amphibolite source. The Late-Miocene adakite-like porphyritic intrusions at Los Pelambres formed closely related in time and space to the subduction of the Juan Fernández Ridge (JFR) hotspot chain along the Chilean margin. Current tectonic reconstructions reveal that, at the time of formation of the Los Pelambres rocks, a W-E segment of the JFR started to subduct beneath them, producing a slow-down of a previously rapid southward migration of a NE-ridge—trench collision. These particular tectonic conditions are favorable for the origin of the Los Pelambres porphyry suite by melting of subducting young hotspot rocks under flat-slab conditions. The incorporation of crustal components into the oceanic lithopheric magma source by subduction erosion is evidenced by the Sr-Nd isotope composition of the Los Pelambres rocks different from the MORB signatures of true adakites. A close relationship apparently exists between the origin of this adakite-like magmatism and the source of the mineralization in the Los Pelambres porphyry copper deposit.Editorial handling: R.J. Goldfarb     

Regional-scale hydrothermal alteration in the Central Blake River Group,western Abitibi subprovince,Canada: implications for VMS prospectivity

The Late Archean Blake River Group is a thick succession of predominantly mafic volcanic rocks within the southern zone of the Abitibi greenstone belt. It contains a number of silicic volcanic centers of different size, including the large Noranda volcanic complex, which is host to 17 past-producing volcanogenic massive sulfide deposits. The Noranda complex consists of a 7- to 9-km-thick succession of bimodal mafic and felsic volcanic rocks erupted during five major cycles of volcanism. Massive sulfide formation coincided with a period of intense magmatic activity (cycle III) and the formation of the Noranda cauldron. Hydrothermal alteration in these rocks is interpreted to reflect large-scale hydrothermal fluid flow associated with rapid crustal extension and rifting of the volcanic complex. The alteration includes abundant albite, chlorite, epidote and quartz (silicification), which exhibit broad stratigraphic and structural control and correlate with previously mapped whole-rock oxygen isotope zonation. The Mine Sequence volcanic rocks are characterized by abundant iron-rich chlorite (Fe/Fe+Mg >0.5), hydrothermal amphibole (ferroactinolite) and coarse-grained epidote of clinozoisite composition (<10 wt% Fe ₂O ₃). Volcanic rocks of the pre-cauldron sequences, which contain only subeconomic stringer mineralization, are characterized by less abundant chlorite and mainly fine-grained epidote (>10 wt% Fe ₂O ₃) lacking the clinozoisite solid solution. Alteration in the Mine Sequence volcanic rocks persists along strike well beyond the limits of the main ore deposits (as far as several tens of kilometers) and can be readily distinguished from greenschist facies metamorphic assemblages at a regional scale. The lack of similar alteration in the pre-cauldron sequences is consistent with limited ¹⁸O-depletion and suggests that the early history of the volcanic complex did not support large-scale, high-temperature fluid flow in these rocks. Comparisons with a much smaller, barren volcanic complex in nearby Ben Nevis township reveal important differences in the alteration mineralogy between volcanoes of different size, with implications for area selection during regional-scale mineral exploration. The Ben Nevis Complex consists of a 3- to 4-km-thick succession of mafic, intermediate and felsic volcanic rocks centered on a small subvolcanic intrusion. Alteration of the volcanic rocks comprises mainly low-temperature assemblages of prehnite, pumpellyite, magnesium-rich chlorite (Fe/Fe+Mg <0.5), iron-rich epidote (>10 wt% Fe ₂O ₃) and calcite. Actinolite ± magnetite alteration occurs proximal to the intrusive core of the complex, but the limited extent of this alteration indicates only local high-temperature fluid circulation adjacent to the intrusion. A distal zone of carbonate alteration is located 4–6 km from the center of the volcano. Although iron-bearing carbonates are present locally within this zone, the absence of siderite argues against a high-temperature origin for this alteration. These observations do not offer positive encouragement for the existence of a fossil geothermal system of sufficient size or intensity to have produced a large massive sulfide deposit.