Designation of marine protected areas in Belgium: A legal and ecological success?

In Belgium a long process (1999–2005) led to the designation of several marine protected areas (MPAs). In order to analyse the designation process, the ‘policy arrangement approach’ was used as an analytical tool. Attention was given to four dimensions (actors and coalitions, arguments, rules and resources). Particular attention was paid to the switch from an authoritative to a more deliberated policy style in reaction to conflicts with stakeholders. This switch in policy style contributed to a successful legal designation, but does not guarantee the best protection of marine biodiversity. This case study linked science (setting ecological goals) to policy (analysis of a policy process) and led to some more general conclusions on the designation of MPAs and the role of participation in this process.     

Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston–cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 °C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm^?1 Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P–T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from ??0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P–T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than ~?10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.     

Implications of subsurface thermal–hydraulic–mechanical processes associated with glaciation on Shield flow system evolution and performance assessment

A deep geologic repository (DGR) situated on the Canadian Shield will be subject to long-term climate change that will markedly alter surface conditions as a result of glaciation and permafrost penetration. Systematic, two-dimensional and three-dimensional coupled thermal–hydraulic–mechanical finite-element simulations with varying degrees of coupling, including depth-dependent salinity (represented as a change in groundwater density) and temperature-dependent density and viscosity, were undertaken to address the implications of glaciation on groundwater flow system dynamics as it could affect DGR performance. The modelling domain consisted of a 1.6-km deep sub-regional scale (≈100 km²) fractured Shield flow system. Initial and transient thermal, hydraulic and mechanical boundary conditions were developed from two realizations of the University of Toronto Glacial Systems Model of the last Laurentide glaciation. Results indicate that during the glacial loading/unloading cycle, for this particular conceptual model, there is limited penetration of glacial meltwaters to depth and small residual anomalous hydraulic head. During glacial coverage, the mechanical factor of safety increases in the moderately fractured and sparsely fractured rock mass, but principal effective stress reorientation also occurs. Given the assumed nonglacial in situ state of stress and mechanical properties, the fracture zones were predicted to be less stable under glacial conditions.

Satellite altimetry for measuring river stages in remote regions

The advent in satellite altimetry with the most accurate satellite radar altimeter since 1992 and its successive missions have enabled the routine global monitoring of water-level (or stage) for surface waters and changes in the quantities of dammed water reservoirs. However, satellite altimeter measurements typically have spatial resolution capable of observing only large water bodies, such as major lakes and rivers. This paper addresses the challenges of how to investigate water levels in medium (~?1 km in width) to small (~?100 m and narrower) rivers. Comparisons between the ENVISAT altimetry ICE-1 waveform retracking height and standard water-level measurements for multiple sections of Ohio River, Columbia River, and Red River of the North in the United States (US) reveals that the satellite altimetry measured water levels agree well with those observed at nearby US Geological Survey gaging stations over the 10-year period starting from 2002. The significant results include those obtained at Thompson, North Dakota (ND, correlation coefficient or R value of 0.76 between satellite and in situ water-level measurements) and Fargo, ND (R?=?0.74), where the stream channels of Red River are merely?~?50 m and ~?40 m wide, respectively, under normal climatic conditions. In addition, demonstrations of the approach over largely inaccessible portions of Tigris–Euphrates Rivers and Helmand River in the Middle East aided in understanding hydrology in these systems. This study demonstrates the ability of satellite radar altimetry to characterize rivers in these study regions which are much narrower than 100 m in width.     

Rigid unit modes in the molecular dynamics simulation of quartz and the incommensurate phase transition

A molecular dynamics simulation of quartz at different temperatures both in the a and in the phase has been conducted. The - phase transition could be observed. A phonon analysis of the -phase confirms and rounds out in a quantitative way the origin of the incommensurate (ic) modulated phase. In particular it traces the optic soft mode at becoming (to a good approximation) a so-called rigid unit mode (RUM) at q0, and elucidates its coupling to the transverse acoustic mode which precipitates the incommensurate transition. This success underpins and illuminates the concept of RUMs and their role in structural phase transitions.     

Very high-frequency and seasonal cave atmosphere PCO2 variability: Implications for stalagmite growth and oxygen isotope-based paleoclimate records

Cave air P_CO2 at two Irish sites varied dramatically on daily to seasonal timescales, potentially affecting the timing of calcite deposition and consequently climate proxy records derived from stalagmites collected at the same sites. Temperature-dependent biochemical processes in the soil control CO₂ production, resulting in high summer P_CO2 values and low winter values at both sites. Large Large-amplitude, high-frequency variations superimposed on this seasonal cycle reflect cave air circulation. Here we model stalagmite growth rates, which are controlled partly by CO₂ degassing rates from drip water, by considering both the seasonal and high-frequency cave air P_CO2 variations. Modeled hourly growth rates for stalagmite CC-Bil from Crag Cave in SW Ireland reach maxima in late December (0.063 μm h^− 1) and minima in late June/early July (0.033 μm h^− 1). For well-mixed ‘diffuse flow’ cave drips such as those that feed CC-Bil, high summer cave air P_CO2 depresses summer calcite deposition, while low winter P_CO2 promotes degassing and enhances deposition rates. In stalagmites fed by well-mixed drips lacking seasonal variations in δ¹⁸O, integrated annual stalagmite calcite δ¹⁸O is unaffected; however, seasonality in cave air P_CO2 may influence non-conservative geochemical climate proxies (e.g., δ¹³C, Sr/Ca). Stalagmites fed by ‘seasonal’ drips whose hydrochemical properties vary in response to seasonality may have higher growth rates in summer because soil air P_CO2 may increase relative to cave air P_CO2 due to higher soil temperatures. This in turn may bias stalagmite calcite δ¹⁸O records towards isotopically heavier summer drip water δ¹⁸O values, resulting in elevated calcite δ¹⁸O values compared to the ‘equilibrium’ values predicted by calcite–water isotope fractionation equations. Interpretations of stalagmite-based paleoclimate proxies should therefore consider the consequences of cave air P_CO2 variability and the resulting intra-annual variability in calcite deposition rates.     

Embryo dune development drivers: beach morphology,growing season precipitation,and storms

For development of embryo dunes on the highly dynamic land–sea boundary, summer growth and the absence of winter erosion are essential. Other than that, however, we know little about the specific conditions that favour embryo dune development. This study explores the boundary conditions for early dune development to enable better predictions of natural dune expansion. Using a 30 year time series of aerial photographs of 33 sites along the Dutch coast, we assessed the influence of beach morphology (beach width and tidal range), meteorological conditions (storm characteristics, wind speed, growing season precipitation, and temperature), and sand nourishment on early dune development. We examined the presence and area of embryo dunes in relation to beach width and tidal range, and compared changes in embryo dune area to meteorological conditions and whether sand nourishment had been applied. We found that the presence and area of embryo dunes increased with increasing beach width. Over time, embryo dune area was negatively correlated with storm intensity and frequency. Embryo dune area was positively correlated with precipitation in the growing season and sand nourishment. Embryo dune area increased in periods of low storm frequency and in wet summers, and decreased in periods of high storm frequency or intensity. We conclude that beach morphology is highly influential in determining the potential for new dune development, and wide beaches enable development of larger embryo dune fields. Sand nourishment stimulates dune development by increasing beach width. Finally, weather conditions and non‐interrupted sequences of years without high‐intensity storms determine whether progressive dune development will take place. Copyright © 2017 John Wiley & Sons, Ltd.     

Spatial and temporal changes in dry-snow line altitude on the Antarctic Peninsula

Drastic changes were detected in glacial systems of the Antarctic Peninsula in the last decades. The observed phenomena comprise the disintegration of ice shelves, acceleration and thinning of glaciers, and retreat of glacier fronts. However, due to the lack of consistent systematic observations in particular of the higher parts of the glacial systems, it is difficult to predict further responses of the Antarctic Peninsula glaciers to climatic change. The present paper analyses spatial and temporal variations of changes in the dry-snow line altitude on the Antarctic Peninsula as extracted from a time series (1992–2005) of ERS-1/2 SAR and Envisat ASAR data. Upward changes in dry-snow line altitude were observed in general, and are attributed to extreme high-temperature events impacting the central plateaus of the Antarctic Peninsula and the increasing duration of warming periods. A mean decrease in dry-snow line altitude was detected on the west side of the peninsula and is identified as a response to recorded increase in precipitation and accumulation. These results validate the capability of SAR data for deriving superficial parameters of glaciers to be used as indicators of climatic changes in high-latitude regions where operational restrictions limit conventional meteorological observations.     

Mineral-scale Sr-isotope constraints on magma evolution and chamber dynamics in the Rum layered intrusion,Scotland

Sr isotopic zoning within single plagioclase crystals from rocks from Unit 9 of the Rum layered intrusion is used to infer events during crystal growth in a magma undergoing contamination. The ⁸⁷Sr/⁸⁶Sr diversity among minerals and between cores and rims of plagioclase crystals increases as the boundary between unit 9 and the overlying Unit 10 peridotite is approached. Models of near-solidus interaction of the cumulate with a fluid or melt, or large scale textural re-equilibration, cannot easily account for the systematic differences in ⁸⁷Sr/⁸⁶Sr between small crystals and the rims of larger crystals.We propose a simple interpretation in which crystal growth is concentrated along the cool margins of the reservoir. Crystals are subsequently advected to a site of accumulation at the base of the reservoir, probably by episodic plume-like dense downwellings allowing mixing of isotopically zoned and unzoned crystals.If the core-rim isotope variations are inherited from primary magmatic growth, then the small distances over which they are now preserved (1–2 mm) place constraints on the minimum cooling rate of the intrusion. Although the length scale of diffusive equilibration is influenced by a number of poorly-constrained variables (starting temperature, feldspar composition, temperature-time path) cooling was clearly very rapid with cooling to effective closure (~1,000 °C) within a few thousand years.Editorial responsibility: I. Parsons