Biochemical and microbial features of shallow marine sediments along the Terra Nova Bay (Ross Sea,Antarctica)

Shallow marine sediments were collected from seven stations (three of which located at Gerlache Inlet, two at Tethys Bay, one at Adelie Cove and one just beneath the Italian Research Base) along the Terra Nova Bay coast (Ross Sea, Antarctica). Their chemical, biochemical and microbiological properties were studied in order to provide further insights in the knowledge of this Antarctic benthic ecosystem. Overall, the organic carbon (OC) represented the major fraction of total carbon (TC) and displayed concentrations similar to or slightly lower than those previously measured in Antarctic bottom sediments. The biopolymeric carbon within OC ranged from 4.1% to 19.9% and showed a wide trophic range (65–834 μg g⁻¹ d.w.). Proteins (PRT) represented on average the main biochemical class contributing to labile organic carbon, followed by lipids (LIP) and carbohydrates (CHO). The activity of aminopeptidase, β-d-glucosidase, alkaline phosphatase and esterase was checked, giving the highest values at Tethys Bay and at the deepest water sediments. The principal component analysis, which was computed considering physical, chemical (elemental and biochemical sedimentary composition) and microbiological parameters (including bacterial abundance, ectoenzymatic activities, T-RFs richness and diversity indices), allowed to obtain two main clusters (“Tethys Bay” and “other stations”). Based on data obtained, two representative 16S rRNA clone libraries using samples from Tethys Bay and Gerlache Inlet were constructed. The sequences of 171 clones were compared to those available in public databases to determine their approximate phylogenetic affiliations. Both aerobic and anaerobic bacteria were disclosed, with the majority of them affiliated with the Gamma- and Deltaproteobacteria, Bacteroidetes and Acidobacteria. The occurrence of strictly anaerobic bacteria suggests that sediments might also undergo anoxic conditions that, in turn, could favor the accumulation of PRT in respect to CHO, assuming that fermentation of amino acids is slower than that of sugars from decomposing polysaccharides.     

Butyltin compounds,sterility and imposex assessment in Nassarius reticulatus (Linnaeus, 1758), prior to the 2008 European ban on TBT antifouling paints,within Basque ports and along coastal areas

Levels of imposex (superimposition of male characters, upon females) and the presence of sterile females are assessed in the gastropod Nassarius reticulatus (L.), at 35 locations in the Basque Country. At 18 of these localities, organotin bioaccumulation (tributyltin (TBT); dibutyltin; monobutyltin) was evaluated, using isotope dilution GC–ICP–MS. Higher imposex levels and TBT body burden were found in confined harbours, with large vessel traffic or the presence of an offshore fleet. The highest values were found for the port of Pasaia, near to a shipyard (a relative penis size index of up to 92%, and TBT body burden up to 405 ng g^?1 – given on a dry weight basis as Sn). Imposex effects were evaluated also in parasitized females, at some of the sampling sites. The percentage of presence of c-type Vas Deferens sequence stages (i.e., with vas deferens beginning at the oviduct opening) was higher in parasitized females. In turn, there was an absence of highly convoluted oviduct in parasitized females.     

Isotope geochemistry of the Tieluping silver-lead deposit, Henan, China: A case study of orogenic silver-dominated deposits and related tectonic setting

The Tieluping silver deposit, which is sited along NE-trending faults within the high-grade metamorphic basement of the Xionger Terrane in the Qinling orogenic belt, is part of an important, recently discovered Mesozoic orogenic-type Ag-Pb belt. Ore formation includes three stages: an early barren quartz-pyrite stage (E), an intermediate polymetallic sulfide ore stage (M), and a late barren carbonate stage (L). Carbon, sulfur and lead isotope systematics indicate that the E-stage fluids are deeply sourced; the L-stage fluids are shallow-sourced meteoric water; whereas the M-stage fluids are a mix of deep-sourced and shallow-sourced fluids. Sulfur and lead isotope data show that the ore-forming fluids must have originated from a source with elevated radiogenic lead and low ³⁴S values, that differs significantly from exposed geologic units in the Xionger Terrane, the lower crust and the mantle. This supports the view that the carbonate-shale-chert sequences of the Guandaokou and Luanchuan Groups south of the Machaoying fault might be the favorable sources, although little is known about their isotopic compositions. A tectonic model that combines collisional orogeny, metallogeny and hydrothermal fluid flow is proposed to explain the formation of the Tieluping silver deposit. During the Mesozoic collision between the North China Craton and South China Block (Early-Mid Triassic Indosinian Orogeny), crustal slabs containing the carbonate-shale-chert sequences of the Guandaokou and Luanchuan Groups, locally rich in organic matter (carbonaceous shale), were thrust northwards beneath the Xionger Terrane along the Machaoying fault. Metamorphic devolatilisation of this underthrust slab probably provided the ore-forming fluids to develop the Ag-Pb ore belt, which includes the Tieluping silver deposit. Fluids and magmas were emplaced during extensional stages related to the Jurassic-Cretaceous Yanshanian Orogeny.Editorial Handling: B. Lehmann     

Copper–gold occurrences in the Palaeoproterozoic Inglefield mobile belt, northwest Greenland: a new mineralisation style?

Inglefield Land in northwest Greenland is an ice-free 7000 km² region underlain by the Palaeoproterozoic Inglefield mobile belt, composed of quartzo-feldspathic gneisses, meta-igneous and supracrustal rocks. These rocks are unconformably overlain by an unmetamorphosed cover of sedimentary and igneous rocks of the Mesoproterozoic Thule Basin and the Lower Palaeozoic Franklinian Basin. Mineralisation in Inglefield Land is characterised by a copper–gold metal association that can be classified in terms of the hosting rocks, namely: garnet–sillimanite paragneiss-hosted, orthogneiss-hosted and mafic–ultramafic-hosted. The paragneiss-hosted mineralisation, the topic of this paper, is essentially confined within a NE-trending structural corridor and consists of bands of sulphide±graphite-bearing, hydrothermally altered, quartzo-feldspathic gneiss, called “rust zones”. These are commonly parallel to the paragneiss main foliation, suggesting a close relationship. The rust zones have strike lengths from a few metres to more than 5 km, and widths ranging from a few centimetres to 200 m. Sulphides mainly include pyrrhotite, pyrite and chalcopyrite. The sulphides form disseminations, up to 30% by volume, but in places they form massive pods or lenses up to 20–30 m, and about 0.1–0.5 m wide. Graphite contents are up to 5 vol.%. Rust zones typically consist of a quartz–plagioclase mosaic associated with a late generation of red-brown biotite, sericite, chlorite and epidote. Mylonitic or cataclastic textures are locally recognisable. XRD analyses of graphite indicate temperatures of between 650 and 700 °C. Sulphur isotope analyses show δ³⁴S values ranging from −6.2‰ to +9.3‰.An ore genesis model is proposed in which the Palaeoproterozoic precursor sandstone–carbonaceous shale succession is polydeformed and polymetamorphosed to granulite facies quartzo-feldspathic and pelitic gneisses, with transposition of layering to axial plane of folds, followed by ductile shearing and mylonitisation, from which future rust zones were derived. The mylonitic zones were infiltrated by fluids, whose origin can be ascribed to deep-penetrating surface waters and/or external brines. In our ore genesis model, we envisage that brines derived from the overlying Lower Palaeozoic Franklinian succession infiltrated the basement into the structural channels provided by the shear/mylonitic zones. At the regional scale, this infiltration was facilitated by a NE-trending corridor, postulated to be a deep structure.     

The role of syn-eruptive vesiculation on explosive basaltic activity at Mt. Etna,Italy

We investigated the dynamics of explosive activity at Mt. Etna between 31 August and 15 December 2006 by combining vesicle studies in the erupted products with measurements of the gas composition at the active, summit crater. The analysed scoria clasts present large, connected vesicles with complex shapes and smaller, isolated, spherical vesicles, the content of which increases in scoriae from the most explosive events. Gas geochemistry reports CO₂/SO₂ and SO₂/HCl ratios supporting a deep-derived gas phase for fire-fountain activity. By integrating results from scoria vesiculation and gas analysis we find that the highest energy episodes of Mt. Etna activity in 2006 were driven by a previously accumulated CO₂-rich gas phase but we highlight the lesser role of syn-eruptive vesicle nucleation driven by water exsolution during ascent. We conclude that syn-eruptive vesiculation is a common process in Etnean magmas that may promote a deeper conduit magma fragmentation and increase ash formation.     

Evolution of Stratocumulus Over Land: Comparison of Ground and Aircraft Observations with Numerical Weather Prediction Simulations

Forecasting of low cloud continues to challenge numerical weather prediction. With this in mind, surface and airborne observations were made over East Anglia, UK, during March 2011 to investigate stratus and stratocumulus advecting from the sea over land. Four surface sites were deployed at various distances inland aligned approximately along the flow. In situ data include cloud-droplet measurements from an aircraft operating off the coast and a tethered balloon 100 km inland. Comparisons of thermodynamic and cloud properties are made with Met Office operational model simulations at horizontal resolutions of 4 and 1.5 km. The clouds contained droplet concentrations up to 600 cm \(^{-3}\) within polluted outflow off Europe. These measurements were compared to three different model schemes for predicting droplet concentration: two of them perform well at low to moderate concentrations but asymptote to 375 cm \(^{-3}\) . Microwave radiometers at the ground sites retrieved liquid water paths that reduced with distance inland and were generally below 200 g m \(^{-2}\) . The modelled water path performs well upstream but more erratically far inland. Comparisons of thermodynamic profiles are made within both Lagrangian and Eulerian frameworks and show the model predicted changes in equivalent potential temperature generally within 1 K, with occasional errors of 2 K or more. The modelled cloud-top temperatures were in good agreement with the observations down to \(-\) 7  \(^{\circ }\) C, but the magnitude of the temperature inversion, although good at times, was too small by on average 1.6 K. The different simulations produced different cloud-top water contents due to a combination of resolution and scientific upgrades to the model, but they generally underestimate the amount of cloud water. Major changes, such as the mesoscale temporary cloud breaks on 2 March 2011 and the complete clearance on 4 March, were seemingly predicted by the model for the correct reasons.     

Re-assessing the surface cycling of molybdenum and rhenium

We re-evaluate the cycling of molybdenum (Mo) and rhenium (Re) in the near-surface environment. World river average Mo and Re concentrations, initially based on a handful of rivers, are calculated using 38 rivers representing five continents, and 11 of 19 large-scale drainage regions. Our new river concentration estimates are 8.0 nmol kg⁻¹ (Mo), and 16.5 pmol kg⁻¹ (Re, natural + anthropogenic). The linear relationship of dissolved Re and in global rivers (R² = 0.76) indicates labile continental Re is predominantly hosted within sulfide minerals and reduced sediments; it also provides a means of correcting for the anthropogenic contribution of Re to world rivers using independent estimates of anthropogenic sulfate. Approximately 30% of Re in global rivers is anthropogenic, yielding a pre-anthropogenic world river average of 11.2 pmol Re kg⁻¹. The potential for anthropogenic contribution is also seen in the non-negligible Re concentrations in precipitation (0.03-5.9 pmol kg⁻¹), and the nmol kg⁻¹ level Re concentrations of mine waters. The linear Mo- relationship (R² = 0.69) indicates that the predominant source of Mo to rivers is the weathering of pyrite. An anthropogenic Mo correction was not done as anthropogenically-influenced samples do not display the unambiguous metal enrichment observed for Re. Metal concentrations in high temperature hydrothermal fluids from the Manus Basin indicate that calculated end-member fluids (i.e. Mg-free) yield negative Mo and Re concentrations, showing that Mo and Re can be removed more quickly than Mg during recharge. High temperature hydrothermal fluids are unimportant sinks relative to their river sources 0.4% (Mo), and 0.1% (pre-anthropogenic Re). We calculate new seawater response times of 4.4 × 10⁵ yr (τ_Mo) and 1.3 × 10⁵ yr (τ_Re, pre-anthropogenic).     

A tectono-genetic model for porphyry–skarn–stratabound Cu–Au–Mo–Fe and magnetite–apatite deposits along the Middle–Lower Yangtze River Valley, Eastern China

The Middle–Lower Yangtze River Valley metallogenic belt (YRB), situated along the northern margin of the Yangtze craton, is characterized by porphyry–skarn–stratabound Cu–Au–Mo–Fe deposits in the areas of uplift and magnetite–apatite deposits in Cretaceous fault basins. Following detailed field investigations and a review of published data, we recognize two episodes of magmatism and mineralization in the YRB: 1) 156–137 Ma high-K calc-alkaline granitoids associated with 148–135 Ma porphyry–skarn–stratabound Cu–Au–Mo–Fe deposits and 2) 135–123 Ma shoshonitic series, associated with 134.9–122.9 Ma magnetite–apatite deposits. A-type granitoids and associated alkaline volcanic have a small age range from 126.5 to 124.8 Ma and are temporally, spatially and genetically associated with the second episode. The geodynamic history of the YRB did not experience the Paleozoic to Mesozoic lithospheric thickening that took place in the North China craton. This process is inferred to be linked to partial melting of the delaminated lower crust at high pressures, resulting in the development of C-type adakitic rocks. The petrochemical and Sr/Nd isotopic data show that both the shoshonitic series and A-type granitoids are quite different from adakites, with only some of the K-calc-alkaline granitoids having adakitic signatures. Previous ore genesis models were established based on an assumed relationship with adakites and a continuous tectono-thermal evolution from 150 to 100 Ma.All data obtained for the Middle–Lower Yangtze River region consistently show that the Tan–Lu regional strike-slip fault zone, initiated at 233 ± 6 to 225 ± 6 Ma from the collision between the North China and Yangtze cratons and was reactivated at ca. 160 Ma. The Tan–Lu fault was caused by the oblique subduction of the Izanagi plate, which along the YRB the low-angle subducted slab and the overlying crust was disrupted or broken due to the disharmonious movement of the two blocks. The high-K calc-alkaline granitoids magmas were derived from melting of the subducted slab, with some input of crustal material. These magmas were emplaced at the intersections between NE- and EW-trending faults and formed porphyry–skarn–stratabound Cu–Au–Mo–Fe deposits between 156 and 137 Ma. After 135 Ma the subducted plate changed its direction of motion to northeast, now running parallel to the Eurasian continental margin, and leading to large-scale continental extension. The shoshonitic series and subsequent A-type granitoids magmatism and the development of magnetite–apatite ores in the YRB, took place in both fault basins and NE-trending rifts between 135 and 124 Ma.