Anthropogenic subsidence in the Mexicali Valley,Baja California,Mexico, and slip on the Saltillo fault

Deep fluid extraction in the Cerro Prieto geothermal field (CPGF) has caused subsidence and induced slip on tectonic faults in the Mexicali Valley (Baja California, Mexico). The Mexicali Valley is located in the southern part of the Salton Trough, at the boundary between the Pacific and North American plates. The Valley is characterized by being a zone of continuous tectonic deformation, geothermal activity, and seismicity. Within the Cerro Prieto pull-apart basin, seismicity is concentrated mainly in swarms, while strong earthquakes have occurred in the Imperial and Cerro Prieto transform faults, that are the eastern and western bound of the basin. Since 1973, fluid extraction at the CPGF has influenced deformation in the area, accelerating the subsidence and causing rupture (frequently as vertical slip or creep) on the surface traces of tectonic faults. Both subsidence and fault slip are causing damage to infrastructure like roads, railroad tracks, irrigation channels, and agricultural fields. Currently, accelerated extraction in the eastern part of CPGF has shifted eastwards the area of most pronounced subsidence rate; this accelerated subsidence can be observed at the Saltillo fault, a southern branch of the Imperial fault in the Mexicali Valley. Published leveling data, together with field data from geological surveys, geotechnical instruments, and new InSAR images were used to model the observed deformation in the area in terms of fluid extraction. Since the electricity production in the CPGF is an indispensable part of Baja California economy, extraction is sure to continue and may probably increase, so that the problem of damages caused by subsidence will likely increase in the future.     

Pockmarks on either side of the Strait of Gibraltar: formation from overpressured shallow contourite gas reservoirs and internal wave action during the last glacial sea-level lowstand?

Integrating novel and published swath bathymetry (3,980 km²), as well as chirp and high-resolution 2D seismic reflection profiles (2,190 km), this study presents the mapping of 436 pockmarks at water depths varying widely between 370 and 1,020 m on either side of the Strait of Gibraltar. On the Atlantic side in the south-eastern Gulf of Cádiz near the Camarinal Sill, 198 newly discovered pockmarks occur in three well localized and separated fields: on the upper slope (n=14), in the main channel of the Mediterranean outflow water (MOW, n=160), and on the huge contourite levee of the MOW main channel (n=24) near the well-known TASYO field. These pockmarks vary in diameter from 60 to 919 m, and are sub-circular to irregularly elongated or lobate in shape. Their slope angles on average range from 3° to 25°. On the Mediterranean side of the strait on the Ceuta Drift of the western Alborán Basin, where pockmarks were already known to occur, 238 pockmarks were identified and grouped into three interconnected fields, i.e. a northern (n=34), a central (n=61) and a southern field (n=143). In the latter two fields the pockmarks are mainly sub-circular, ranging from 130 to 400 m in diameter with slope angles averaging 1.5° to 15°. In the northern sector, by contrast, they are elongated up to 1,430 m, probably reflecting MOW activity. Based on seismo-stratigraphic interpretation, it is inferred that most pockmarks formed during and shortly after the last glacial sea-level lowstand, as they are related to the final erosional discontinuity sealed by Holocene transgressive deposits. Combining these findings with other existing knowledge, it is proposed that pockmark formation on either side of the Strait of Gibraltar resulted from gas and/or sediment pore-water venting from overpressured shallow gas reservoirs entrapped in coarse-grained contourites of levee deposits and Pleistocene palaeochannel infillings. Venting was either triggered or promoted by hydraulic pumping associated with topographically forced internal waves. This mechanism is analogous to the long-known effect of tidal pumping on the dynamics of unit pockmarks observed along the Norwegian continental margin.     

Influence of relative density,particle shape,and stress path on the plane strain compression behavior of granular materials

Two types of stress path-controlled plane strain compression tests were performed on both loose and dense specimens of angular and sub-angular sands and two rounded glass beads with different particle sizes. Digital image correlation method was used to analyze local deformation developments, especially shear band patterns. The material behavior in response to shearing has been found to be dependent on the relative density, particle shape, and stress path. The results of analysis on local deformation developments showed that the onset of shear bands occurred prior to their peak strengths in both dense and loose specimens. The growth rates of local maximum shear strain along a shear band were approximately consistent with an increasing global axial strain after the onset of shear band. The shear band width was influenced by both the mean particle size and the particle shape. The measured shear band inclination angles were in between those estimated by Coulomb’s and Roscoe’s formulas.     

Building a 3D geomodel for water resources management: case study in the Regional Park of the lower courses of Manzanares and Jarama Rivers (Madrid, Spain)

Water resources management of protected sites requires a powerful tool to analyze the process and changes that are occurring in the environment. This paper describes a 3D geomodel design of the Jarama River Detrital Aquifer located in Madrid (Spain). That hydrogeological unit is included in the “Parque Regional de los Cursos Bajos de los Ríos Manzanares y Jarama” (Regional Park of the Lower Courses of Manzanares and Jarama Rivers). The goal of this work is to define a method by which a three-dimensional (3D) model can be created with hydrogeologic geometry real of main aquifer, to accomplish an adequate management of the groundwater resources. All data used in this study were integrated in a geographic database: geological and hydrogeological information, geological map (1:25,000), eleven cross-sections, piezometric maps and a digital elevation model. The constructed 3D model of the Jarama Aquifer shows geometric features and spatial distribution and variations of geologic units. Thus, the 3D model allows the assessment of volumes of each unit, the depth and thickness variations of the main aquifer, and the spatial and temporal variations of water tables. From the 3D model, the most suitable areas (in terms of groundwater protection) for managed recharge and mining works have been identified.     

Magnetic susceptibility and electrical conductivity as a proxy for evaluating soil contaminated with arsenic,cadmium and lead in a metallurgical area in the San Luis Potosi State,Mexico

A total of 113 samples of waste and soil were collected from a site in the state of San Luis Potosi, Mexico, that was occupied for several years by the metallurgical industry. Specific magnetic susceptibility (MS), electrical conductivity (EC) and pH were determined, as well as the total and available concentrations of potentially toxic elements (PTEs) such as As, Cd, Cu, Fe, Pb and Zn, which may cause a health risk for humans, animals and ecosystems, and the concentrations of major ions in aqueous extracts of soils and wastes. The solid phases of the samples were also characterized. The results revealed that the soils and wastes exhibited elevated values of PTEs, MS and EC. For soils these values decreased with increasing distance from the waste storage sites. The MS values were elevated primarily due to the presence of Fe-oxyhydroxides, such as magnetite, hematite and goethite, which contain PTEs in their structure leading to a high correlation between the value of MS and the As, Cd, Fe and Pb contents (r = 0.57–0.91) as well as between the PTEs values (r = 0.68–0.92). The elevated EC values measured in the metallurgical wastes were the result of presence of the sulfate minerals of Ca, Mg and Fe. The pollution index, which indicates the levels of simultaneous toxicity from elements such as As, Cd and Pb, was determined, with extreme hazard zones corresponding to areas that exhibit high MS values (0.91 correlation). In conclusion, MS measurements can be used as an indirect indicator to evaluate the PTE contamination in metallurgical areas, and EC measurements can aid in the identification of pollution sources.     

Detection and mapping of burnt areas from time series of MODIS-derived NDVI data in a Mediterranean region

Moderate resolution remote sensing data, as provided by MODIS, can be used to detect and map active or past wildfires from daily records of suitable combinations of reflectance bands. The objective of the present work was to develop and test simple algorithms and variations for automatic or semiautomatic detection of burnt areas from time series data of MODIS biweekly vegetation indices for a Mediterranean region. MODIS-derived NDVI 250m time series data for the Valencia region, East Spain, were subjected to a two-step process for the detection of candidate burnt areas, and the results compared with available fire event records from the Valencia Regional Government. For each pixel and date in the data series, a model was fitted to both the previous and posterior time series data. Combining drops between two consecutive points and 1-year average drops, we used discrepancies or jumps between the pre and post models to identify seed pixels, and then delimitated fire scars for each potential wildfire using an extension algorithm from the seed pixels. The resulting maps of the detected burnt areas showed a very good agreement with the perimeters registered in the database of fire records used as reference. Overall accuracies and indices of agreement were very high, and omission and commission errors were similar or lower than in previous studies that used automatic or semiautomatic fire scar detection based on remote sensing. This supports the effectiveness of the method for detecting and mapping burnt areas in the Mediterranean region.     

Magmatic inclusions and felsic clasts in the Dar al Gani 319 polymict ureilite

Abstract— Magmatic inclusions occur in type II ureilite clasts (olivine‐orthopyroxene‐augite assemblages with essentially no carbon) and in a large isolated plagioclase clast in the Dar al Gani (DaG) 319 polymict ureilite. Type I ureilite clasts (olivine‐pigeonite assemblages with carbon), as well as other lithic and mineral clasts in this meteorite, are described in Ikeda et al.(2000). The magmatic inclusions in the type II ureilite clasts consist mainly of magnesian augite and glass. They metastably crystallized euhedral pyroxenes, resulting in feldspar component‐enriched glass. On the other hand, the magmatic inclusions in the large plagioclase clast consist mainly of pyroxene and plagioclase, with a mesostasis. They crystallized with a composition along the cotectic line between the pyroxene and plagioclase liquidus fields. DaG 319 also contains felsic lithic clasts that represent various types of igneous lithologies. These are the rare components not found in the common monomict ureilites. Porphyritic felsic clasts, the main type, contain phenocrysts of plagioclase and pyroxene, and their groundmass consists mainly of plagioclase, pyroxene, and minor phosphate, ilmenite, chromite, and/or glass. Crystallization of these porphyritic clasts took place along the cotectic line between the pyroxene and plagioclase fields. Pilotaxitic felsic clasts crystallized plagioclase laths and minor interstitial pyroxene under metastable conditions, and the mesostasis is extremely enriched in plagioclase component in spite of the ubiquitous crystallization of plagioclase laths in the clasts. We suggest that there are two crystallization trends, pyroxene‐metal and pyroxene‐plagioclase trends, for the magmatic inclusions and felsic lithic clasts in DaG 319. The pyroxene‐metal crystallization trend corresponds to the magmatic inclusions in the type II ureilite clasts and the pilotaxitic felsic clasts, where crystallization took place under reducing and metastable conditions, suppressing precipitation of plagioclase. The pyroxene‐plagioclase crystallization trend corresponds to the magmatic inclusions in the isolated plagioclase clast and the porphyritic felsic clasts. This trend developed under oxidizing conditions in magma chambers within the ureilite parent body. The felsic clasts may have formed mainly from albite component‐rich silicate melts produced by fractional partial melting of chondritic precursors. The common monomict ureilites, type I ureilites, may have formed by the fractional partial melting of alkali‐bearing chondritic precursors. However, type II ureilites may have formed as cumulates from a basaltic melt.     

Astrometry in the Kerr field inPPN approximation

The equation of motion written down using a metric obtained from the Kerr metric allows us to get both the deflection angle of light ray bending by the gravitational field of the Sun and its corresponding time delay. We reproduce the experimental data of Epstein-Shapiro and also it is in accordance with the theoretical results obtained by Brumberget al. (1990) using another approach to this problem.Presented at the 2nd UN/ESA Workshop, held in Bogotá, Colombia, 9–13 November, 1992.     

On the Use of Random Material in Dam Cores: Case of the Manso Dam,Brazil

Geotechnical and Geological Engineering - The Manso Dam, in the Brazilian State of Mato Grosso, intended for flood control and electricity generation, was built by a state-owned energy company in...