Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

Unusual large-scale phytoplankton blooms in the equatorial Pacific

Unusual large-scale accumulations of phytoplankton occurred across 10,000 km of the equatorial Pacific during the 1998 transition from El Niño to La Niña. The forcing and dynamics of these phytoplankton blooms were studied using satellite-based observations of sea surface height, temperature and chlorophyll, and mooring-based observations of winds, hydrography and ocean currents. During the bloom period, the thermocline (nutricline) was anomalously shallow across the equatorial Pacific. The relative importance of processes that enhanced nutrient flux into the euphotic zone differed between the western and eastern regions of the blooms. In the western bloom region, the important vertical processes were turbulent vertical mixing and wind-driven upwelling. In contrast, the important processes in the eastern bloom region were wave-forced shoaling of nutrient source waters directly into the euphotic zone, along-isopycnal upwelling, and wind-driven upwelling. Advection by the Equatorial Undercurrent spread the largest bloom 4500 km east of where it began, and advection by meridional currents of tropical instability waves transported the bloom hundreds of kilometers north and south of the equator. Many processes influenced the intricate development of these massive biological events. Diverse observations and novel analysis methods of this work advance the conceptual framework for understanding the complex dynamics and ecology of the equatorial Pacific.     

Longitudinal strength of a high-speed ferry

The longitudinal strength of the high-speed ferry was investigated by subjecting the ship's hull girder to long-term loads obtained from a frequency-domain panel code. Prior to the statistical analysis, linearly computed transfer functions were corrected for nonlinear effects, yielding two sets of transfer functions valid for different wave amplitudes. One set corresponded to the hogging condition; the other set, to the sagging condition. Two regular equivalent design waves were specified that resulted in loads representing the most severe global design load conditions. The still-water loading condition, yielding a still-water vertical bending moment in hogging, was superimposed on the wave-induced loads to obtain the total (design) loads in hogging. For the sagging condition only, additional impact-related loads were superimposed to obtain the total (design) loads in sagging. A finite element model of the ship's structure was subjected to pressure distributions according to the two regular design waves. For comparison with classification society rule values, a simple beam theory strength analysis of the ship's midship section was performed first, and then another finite element analysis was carried out, whereby the imposed loads were tuned to the rule values of vertical bending moments. Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25–39%) from comparable stresses obtained by the panel code based finite element analysis. However, stresses obtained from the rule-based finite element analysis agreed more favorably, especially in hogging. In the uppermost deck, for example, the panel code based compressive stress was only 9% larger than the comparable stress from the rule-based finite element analysis.     

Spatial, temporal and diel variations of fish assemblages at two sandy beaches in the Sepetiba Bay, Rio de Janeiro, Brazil

Fish assemblages from two beaches, one in the inner and the other in the outer Sepetiba Bay (latitude: 22°54′–23°04′S; longitude: 43°34′–44°10′W), Southeast Brazil, were sampled by beach seine net, simultaneously, on both seasonal and diel scales, between August 1998 and June 1999. Sites were selected to encompass different environmental conditions which reflect the two bay zones, thus providing a comprehensive assessment of the factors influencing surf zone fish assemblages, and their spatial, seasonal and diel variations. A total of 55 fish species was recorded, mostly young-of-the-year. Anchoa tricolor, Micropogonias furnieri, Gerres aprion, Diapterus rhombeus, Harengula clupeola, Atherinella brasiliensis and Mugil liza were numerically dominant and contributed to 95.2% of the total fish catches. Strong differences in fish assemblages were observed between the two areas, with higher number of species in the outer bay. Increases in fish numbers occurred in winter, while the highest biomass occurred in winter and summer. Transparency, followed by salinity, was responsible for most of the spatial variability and played an important role in structuring fish assemblages. Overall, diel patterns did not reveal any significant trends; however, if we consider each season separately, an increase in fish numbers during the day with peak at sunset was observed in winter, and a higher biomass occurred at night in winter and summer. Species preferences for various combinations of environmental variables are responsible for shifts in the structure and overall abundance of assemblages and dictated some patterns. The sciaenid M. furnieri, the second most abundant species, occurred only in the inner zone, being more abundant in winter. The species of Engraulidae were more abundant in the outer zone in winter/spring during the day. The gerreids G. aprion and D. rhombeus occurred mainly in summer. Overall, temporal fluctuations act more at a specific level than at a structural one, and may be linked to some particular stages of the fish life cycle, but do not significantly influence the spatial organization.     

Community structure and dynamics of deep-water decapod assemblages from Le Danois Bank (Cantabrian Sea, NE Atlantic): Influence of environmental variables and food availability

The community structure of the decapod crustaceans inhabiting Le Danois Bank (Cantabrian Sea, NE Atlantic Ocean) was studied on two cruises performed in October 2003 and April 2004. Otter and beam-trawls were used to collect this fauna. At depths ranging between 455 and 1048 m, we found distinct decapod assemblages on the bank summit and deeper in the inner basin (between the bank and the continental shelf). The faunal discontinuity between these groups appeared at around 600 m (e.g. between 612 and 642 m in the basis of species replacement). The summit assemblage was characterized by low diversity (in terms of number and relative abundances of species) and by the dominance of hermit crabs (Pagurus alatus, Anapagurus laevis, Pagurus excavatus), the crangonid Pontophilus spinosus and the squat lobster Munida sarsi. Species characterizing the deeper assemblage, which was richer in terms of diversity, were Munida tenuimana, Parapagurus pilosimanus, Pontophilus norvegicus, the crab Geryon trispinosus and a number of bathypelagic shrimps (Sergia robusta, Acanthephyra pelagica and Pasiphaea tarda). Changes in decapod composition characterized by multidimensional scaling analyses were correlated with different variables, e.g. %mud and %organic matter (OM), temperature and salinity close to the bottom. Among those the %OM and %mud in sediments affected decapod distributions the most. The summit of the bank was covered by fine sediments with low proportion of mud (13.9–29.3%) and OM (2.55–3.50%). By contrast, sediment of the inner basin had a higher proportion of OM and mud (64.1–84.2%; 6.26–7.00%, respectively). The low proportion of mud at the summit of Le Danois Bank may explain the absence or scarcity of burrowing species (e.g. the lobster Nephrops norvegicus, the shrimps Calocaris macandreae and Alpheus glaber and the crab Goneplax rhomboides), that are dominant at similar depths (400–500 m) in the upper muddy assemblage on the mainland-continental slope in the Bay of Biscay (44–46°N). The dominance of certain species on the summit of submarine mounts can probably be related to their biology and feeding ecology. For example, pagurids are deposit feeders, even consuming marine snow (e.g. Chl-a identified in guts of Pagurus alatus), and they have low gut fullness (probably indicating a capacity to withstand long periods under starvation), that would favour their adaptability to a rather unpredictable habitat such as Le Danois Bank summit. Regarding prey availability, zooplankton/micronekton and infauna distributed around Le Danois Bank showed different depth-related patterns. Among zooplankton, mesopelagic decapods, mysids, and fishes were absent at the bank summit, while euphausiids exhibited high abundances over the summit. No significant trends with depth were found for infauna abundance, and for instance polychaete densities were similar both at the summit and the inner basin. Therefore, prey availability was lower for summit assemblages regarding zooplankton/micronekton. Patterns in mean size vs. depth were species specific for decapods, and the possible role of the bank summit as a recruitment area was not general for the whole decapod assemblage.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

On the estimation of mooring line characteristic resistance for reliability analysis

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.