Land surface coupling in regional climate simulations of the West African monsoon

Coupling of the Community Land Model (CLM3) to the ICTP Regional Climate Model (RegCM3) substantially improves the simulation of mean climate over West Africa relative to an older version of RegCM3 coupled to the Biosphere Atmosphere Transfer Scheme (BATS). Two 10-year simulations (1992–2001) show that the seasonal timing and magnitude of mean monsoon precipitation more closely match observations when the new land surface scheme is implemented. Specifically, RegCM3–CLM3 improves the timing of the monsoon advance and retreat across the Guinean Coast, and reduces a positive precipitation bias in the Sahel and Northern Africa. As a result, simulated temperatures are higher, thereby reducing the negative temperature bias found in the Guinean Coast and Sahel in RegCM3–BATS. In the RegCM3–BATS simulation, warmer temperatures in northern latitudes and wetter soils near the coast create excessively strong temperature and moist static energy gradients, which shifts the African Easterly Jet further north than observed. In the RegCM3–CLM3 simulation, the migration and position of the African Easterly Jet more closely match reanalysis winds. This improvement is triggered by drier soil conditions in the RegCM3–CLM3 simulation and an increase in evapotranspiration per unit precipitation. These results indicate that atmosphere–land surface coupling has the ability to impact regional-scale circulation and precipitation in regions exhibiting strong hydroclimatic gradients.     

Altitudinal trends in δ<Superscript>13</Superscript>C value,stomatal density and nitrogen content of <Emphasis Type="Italic">Pinus tabuliformis</Emphasis> needles on the southern slope of the middle Qinling Mountains,China

In this study, a coniferous tree species (Pinus tabuliformis Carr.) was investigated at a moderate-altitude mountainous terrain on the southern slope of the middle Qinling Mountains (QLM) to detect the trends in carbon isotope ratio (δ¹³C), leaf nitrogen content (LNC) and stomatal density (SD) with altitude variation in north-subtropical humid mountain climate zone of China. The results showed that LNC and SD both significantly increased linearly along the altitudinal gradient ranging from 1000 to 2200 m, whereas leaf δ¹³C exhibited a significantly negative correlation with the altitude. Such a correlation pattern differs obviously from that obtained in offshore low-altitude humid environment or inland high-altitude semi-arid environment, suggesting that the pattern of increasing δ¹³C with the altitude cannot be generalized. The negative correlation between δ¹³C and altitude might be attributed mainly to the strengthening of carbon isotope fractionation in plants caused by increasing precipitation with altitude. Furthermore, there was a remarkable negative correlation between leaf δ¹³C and LNC. One possible reason was that increasing precipitation that operates to increase isotopic discrimination with altitude overtook the LNC in determining the sign of leaf δ¹³C. The significant negative correlation between leaf δ¹³C and SD over altitudes was also found in the present study, indicating that increases in SD with altitude would reduce, rather than enhance plant δ¹³C values.     

Indigenous Australians’ knowledge of weather and climate

Although the last 200 years of colonisation has brought radical changes in economic and governance structures for thousands of Aboriginal and Torres Strait Islanders living in remote areas of northern Australia, many of these Indigenous people still rely upon, and live closely connected to, their natural environment. Over millennia, living ‘on country’, many of these communities have developed a sophisticated appreciation of their local ecosystems and the climatic patterns associated with the changes in them. Some of this knowledge is recorded in their oral history passed down through generations, documented in seasonal weather calendars in local languages and, to a limited degree, transcribed and translated into English. This knowledge is still highly valued by these communities today, as it is used to direct hunting, fishing and planting as well as to inform many seasonally dependant cultural events. In recent years, local observations have been recognised by non-Indigenous scientists as a vital source of environmental data where few historic records exist. Similar to the way that phenological observations in the UK and US provide baseline information on past climates, this paper suggests that Indigenous observations of seasonal change have the potential to fill gaps in climate data for tropical northern Australia, and could also serve to inform culturally appropriate adaptation strategies. One method of recording recent direct and indirect climate and weather observations for the Torres Strait Islands is documented in this paper to demonstrate the currency of local observations of climate and its variability. The paper concludes that a comprehensive, participatory programme to record Aboriginal and Torres Strait Islander knowledge of past climate patterns, and recent observations of change, would be timely and valuable for the communities themselves, as well as contributing to a greater understanding of regional climate change that would be useful for the wider Australian population.     

Model for the formation of arsenic contamination in groundwater. 1. Datong Basin,China

Mineral equilibria were analyzed in the system As-bearing rock-meteoric water. It was shown that carbonate rocks are the most probable source of As and Sr in the waters of the Datong Basin (People's Republic of China). The reason for groundwater enrichment in As is the shift of the equilibrium FeCO₃ (siderite) + H₂O = FeOOH(goethite) + CO₂(g) + H₂(g) to the left (toward siderite formation) owing to organic matter oxidation by atmospheric oxygen and an increase in the equilibrium partial pressure of CO₂, while the Eh of the system remains below ?0.30 ± 0.06 V.     

Contribution of rock magnetism to stratigraphy and palaeoenvironment of the Karaïn cave infill,Antalya, Turkey

The magnetic properties of the infill of the Karaïn cave in Turkey were compared to the results of a sedimentological study on three longitudinal sections. The sediments of this site, namely cavity E, cover a period of ca. 500 ka and correspond to a large part of the Middle and Upper Pleistocene. The evolution observed for the various magnetic parameters is mainly related to climatic changes which followed one another during the infilling history of the cave. Two preconditions are necessary to understand the environmental magnetism, namely both the identification and the quantification of different magnetic phases (components) in the sediments, expressed by the ratio of the various magnetic parameters and the analysis of the magnetization curves. The results obtained through the study of the different magnetic parameters (low-field initial bulk (κ_lf) and mass (χ_lf) magnetic susceptibility, frequency dependence of the magnetic susceptibility (χ_fd), anhysteretic remanent magnetization (ARM), hysteresis parameters, anhysteretic susceptibility, ...) on 171 samples allowed us: 1 — to follow the nature, size and source of the grains at each level, and 2 — to identify six alternating levels, having different magnetic susceptibility signatures during warm, damp periods, in which the contribution of prehistorical hominidae (Homo Sapiens or Homo Neandertalensis) and animals, could have modified the original sedimentary structures.This study, in agreement with the sedimentological results, suggests a significant difference between sandy or sandy-silty levels (3 and 5) and those rich in clays and concretions. The sandy or sandy-silty levels are mainly characterized by a low amount of antiferromagnetic type grains, likely goethite and hematite, dominated by single-domain size (SD) and a small content of ferrimagnetic type grains, likely magnetite of multidomain size (MD), inherited from the host rock. Antiferromagnetic grains did not develop and were a priori drifted by the wind. They could be contemporaneous with a cold climate.The clays and clayey-silty levels are characterized by a large amount of superparamagnetic (SP) and SD grains, and a high content of low coercivity magnetic grains (magnetite, maghemite and Ti-magnetite). The saturation remanent magnetization (SIRM) of clayey levels is 5 to 10 times higher than that of sandy levels. The clayey levels are contemporaneous with a humid climate, which favoured the formation of secondary iron oxides, of stalagmitic floors and calcite concretions and of the emplacement of local pedogenesis phenomena, mainly at the top of the infill, i.e. in Level 6.     

Lava flow hazard at Nyiragongo volcano,D.R.C.

The 2002 eruption of Nyiragongo volcano constitutes the most outstanding case ever of lava flow in a big town. It also represents one of the very rare cases of direct casualties from lava flows, which had high velocities of up to tens of kilometer per hour. As in the 1977 eruption, which is the only other eccentric eruption of the volcano in more than 100 years, lava flows were emitted from several vents along a N–S system of fractures extending for more than 10 km, from which they propagated mostly towards Lake Kivu and Goma, a town of about 500,000 inhabitants. We assessed the lava flow hazard on the entire volcano and in the towns of Goma (D.R.C.) and Gisenyi (Rwanda) through numerical simulations of probable lava flow paths. Lava flow paths are computed based on the steepest descent principle, modified by stochastically perturbing the topography to take into account the capability of lava flows to override topographic obstacles, fill topographic depressions, and spread over the topography. Code calibration and the definition of the expected lava flow length and vent opening probability distributions were done based on the 1977 and 2002 eruptions. The final lava flow hazard map shows that the eastern sector of Goma devastated in 2002 represents the area of highest hazard on the flanks of the volcano. The second highest hazard sector in Goma is the area of propagation of the western lava flow in 2002. The town of Gisenyi is subject to moderate to high hazard due to its proximity to the alignment of fractures active in 1977 and 2002. In a companion paper (Chirico et al., Bull Volcanol, in this issue, 2008) we use numerical simulations to investigate the possibility of reducing lava flow hazard through the construction of protective barriers, and formulate a proposal for the future development of the town of Goma.     

JP3D compression of solar data-cubes: Photospheric imaging and spectropolarimetry

Hyperspectral imaging is an ubiquitous technique in solar physics observations and the recent advances in solar instrumentation enabled us to acquire and record data at an unprecedented rate. The huge amount of data which will be archived in the upcoming solar observatories press us to compress the data in order to reduce the storage space and transfer times. The correlation present over all dimensions, spatial, temporal and spectral, of solar data-sets suggests the use of a 3D base wavelet decomposition, to achieve higher compression rates. In this work, we evaluate the performance of the recent JPEG2000 Part 10 standard, known as JP3D, for the lossless compression of several types of solar data-cubes. We explore the differences in: a) The compressibility of broad-band or narrow-band time-sequence; I or V Stokes profiles in spectropolarimetric data-sets; b) Compressing data in [x,y, λ] packages at different times or data in [x,y,t] packages of different wavelength; c) Compressing a single large data-cube or several smaller data-cubes; d) Compressing data which is under-sampled or super-sampled with respect to the diffraction cut-off.     

Heavy metals in mangrove sediments of the central Arabian Gulf shoreline,Saudi Arabia

To assess heavy metals in mangrove swamps of Sehat and Tarut coastal areas along the Arabian Gulf, 18 sediment samples were collected for Al, V, Cr, Mn, Cu, Zn, Cd, Pb, Hg, Sr, As, Fe, Co, and Ni analysis. The results indicated that the distribution of some metals was largely controlled by anthropogenic inputs, while others were of terrigenous origin and most strongly associated with distribution of aluminum and total organic carbon in sediments. Mangrove sediments were extremely severe enriched with Sr (EF?=?67.59) and very severe enriched with V, Hg, Cd, Cu, As (EF?=?44.28, 37.45, 35.77, 25.97, and 11.53, respectively). Average values of Sr, V, Hg, Cd, Cu, Ni, As, and Cr were mostly higher than the ones recorded from the Mediterranean Sea, the Red Sea, the Gulf of Aqaba, the Caspian Sea, the Arabian and Oman gulfs, coast of Tanzania, sediment quality guidelines, and the background shale and the earth crust. Landfilling due to coastal infrastructure development around mangrove forests, oil spills and petrochemical and desalination effluents from Al-Jubail industrial city to the north were the anthropogenic activities that further enhanced heavy metals in the studied mangrove sediments.     

Mn-oxides and sequestration of heavy metals in a suburban catchment basin of the Chesapeake Bay watershed

The Chesapeake Bay is greatly impacted by numerous pollutants including heavy metals and understanding the controls on the distribution of heavy metals in the watershed is critical to mitigation and remediation efforts in controlling this type of pollution. Clasts from a stormwater catchment basin draining a subdivision near George Mason University, Fairfax VA (38°50.090°N 78°19.204°W) were investigated using X-ray diffraction (XRD), Scanning electron microcopy (SEM) and energy dispersive spectroscopy (EDS) to determine the nature of Mn-oxide coatings and relationship to bound heavy metals. Mn-oxides are poorly crystalline and occur as subhedral to anhedral platy particles and more rarely as euhedral plates. Micronodules are a commonly observed texture. Chemical compositions of coatings are variable with average major constituent concentrations being Mn (33.38 wt%), Fe (11.88 wt%), Si (7.33 wt%), Al (5.03 wt%), and Ba (0.90 wt%). Heavy metals are found in the coatings with Zn being most prevalent, occurring in approximately 58% of analyses with an average concentration of (0.66 wt%). Minor amounts of Co, Ni, Pb, and Cl are observed. Heavy metals and Cl are interpreted as being derived from road pollution. Mn-oxides can serve as a sequestration mechanism for pollution but may also release heavy metals. Field and laboratory observations indicate Mn-oxides occurring on the surface of the clasts can be mechanically mobilized. This is a mechanism for transporting heavy metals into the Chesapeake Bay watershed. Deicing agents may serve as a mechanism to release heavy metals through cation exchange and increased ionic strength. This is the first detailed mineralogical investigation of Mn-oxides and the roles they may play in pollution in the Chesapeake Bay.     

Position and velocity perturbations for the determination of geopotential from space geodetic measurements

Although space geodetic observing systems have been advanced recently to such a revolutionary level that low Earth Orbiting (LEO) satellites can now be tracked almost continuously and at the unprecedented high accuracy, none of the three basic methods for mapping the Earth’s gravity field, namely, Kaula linear perturbation, the numerical integration method and the orbit energy-based method, could meet the demand of these challenging data. Some theoretical effort has been made in order to establish comparable mathematical modellings for these measurements, notably by Mayer-Gürr et al. (J Geod 78:462–480, 2005). Although the numerical integration method has been routinely used to produce models of the Earth’s gravity field, for example, from recent satellite gravity missions CHAMP and GRACE, the modelling error of the method increases with the increase of the length of an arc. In order to best exploit the almost continuity and unprecedented high accuracy provided by modern space observing technology for the determination of the Earth’s gravity field, we propose using measured orbits as approximate values and derive the corresponding coordinate and velocity perturbations. The perturbations derived are quasi-linear, linear and of second-order approximation. Unlike conventional perturbation techniques which are only valid in the vicinity of reference mean values, our coordinate and velocity perturbations are mathematically valid uniformly through a whole orbital arc of any length. In particular, the derived coordinate and velocity perturbations are free of singularity due to the critical inclination and resonance inherent in the solution of artificial satellite motion by using various types of orbital elements. We then transform the coordinate and velocity perturbations into those of the six Keplerian orbital elements. For completeness, we also briefly outline how to use the derived coordinate and velocity perturbations to establish observation equations of space geodetic measurements for the determination of geopotential.