Degradation and utilization of protein derived from <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> by marine microbial community

Microbial degradation and utilization of proteins derived from bacterial detritus were investigated in a microcosm experiment using Pseudomonas aeruginosa detritus as a substrate. To assess the effects of natural marine microbial communities on degradation and utilization of protein derived from P. aeruginosa cells, four microcosms were prepared: natural seawater (containing the natural microbial community) with P. aeruginosa detritus (N+Pa), autoclaved seawater with P. aeruginosa detritus (A+Pa), natural seawater (N) and autoclaved seawater (A) without adding anything as a control. The numbers of total and growing bacterial cells, protease activity, and transition of P. aeruginosa proteins were monitored in the four microcosms. Changes in the numbers of total and growing bacterial cells and protease activities indicated that bacterial detritus significantly stimulated the microbial community in the microcosms. Both the surviving P. aeruginosa in A+Pa and natural microbial community in N+Pa microcosms were able to degrade and utilize P. aeruginosa detritus; however, the community in N+Pa including various microbes maintained high activity longer, indicating that diversity is an important factor in keeping the community active. Even under the very high protease activity in N+Pa, 39-kDa and 48-kDa proteins from P. aeruginosa remained in the microcosm during the entire experiment (150 days). Immunoblotting suggested the 48-kDa protein was an intact molecule of OprP, which had been detected from the dissolved fraction of natural seawater in previous studies. This result suggests that the protein molecules that had been detected from natural seawater actually had a high tolerance to microbial degradation.     

Effects of mass source/sink at the western boundary on the wind-driven gyres: Implications for the ventilation of the north pacific intermediate layer through convection in the Okhotsk Sea and tidal mixing at the Kuril Straits

A steady quasi-geostrophic 2.5-layer model, forced by both Ekman pumping and a mass source/sink situated at the western boundary has been constructed to investigate the effect of diapycnal transport due to convection in the Okhotsk Sea and tidal mixing at the Kuril Straits on the intermediate layer in the North Pacific. The model illustrates a combined effect of the wind-driven and mass-driven circulations. First, net mass input induces a “barotropic” mode inter-gyre flow along the western boundary through the dynamical influence of Kelvin waves. This flow creates characteristic curves (geostrophic contours) that facilitate inter-gyre communication through the western boundary layer from the location of the mass source to the subtropical gyre. Due to the effect of wind-driven circulation, the offshore part turns eastward into the interior, encircles the outer rim of the region (which would otherwise be the pool region in the absence of mass input), and then encounters the western boundary. Eventually, the water fed into the lower layer flows mostly along this path and later flows away to the equatorial region. Conversely, in the upper layer, water is fed from the equator to the subtropics, and to the subpolar interior region through the western boundary current. The water then circulates along the outer rim and is absorbed into the mass sink. The model is controlled mainly by three nondimensional parameters: (1) the ratio of net mass input rate to the maximum Sverdrup transport (Q/T _Sv ^max ), which affects the inter-gyre communication by altering the paths of geostrophic contours, (2) the ratio of a mass input rate into the lower layer to that in total (Q ₂/Q), which controls the vertical structure of the inter-gyre flow, and (3) the measure of the wind forcing effect relative to the β effect, which determines the horizontal extent of the area influenced by the mass input. The other parameter regimes with respect to Q/T _Sv ^max and Q ₂/Q are also presented.     

Rare earth elements and yttrium in ferromanganese deposits from the South China Sea: distribution, composition and resource considerations

Ferromanganese nodules and crusts contain relatively high concentration of rare earth elements(REE) and yttrium(REY),with a growing interest in exploitation as an alternative to land-based REY resources.On the basis of comprehensive geochemical approach,the abundance and distribution of REY in the ferromanganese nodules from the South China Sea are analyzed.The results indicate that the REY contents in ferromanganese deposits show a clear geographic regularity.Total REY contents range from 69.1×10~(–6) to 2 919.4×10~(–6),with an average value of 1 459.5×10~(–6).Especially,the enrichment rate of Ce content is high,accounting for almost 60% of the total REY.This REE enrichment is controlled mainly by the sorption of ferromanganese oxides and clay minerals in the nodules and crusts.Moreover,the total REY are higher in ferromanganese deposits of hydrogenous origin than of diagenetic origin.Finally,Light REE(LREE) and heavy REE(HREE) oxides of the ferromanganese deposits in the study area can be classified into four grades: non-enriched type,weakly enriched type,enriched type,and extremely enriched type.According to the classification criteria of rare earth resources,the Xisha and Zhongsha platform-central deep basin areas show a great potential for these rare earth metals.     

Dynamic Performance Investigation of A Spar-Type Floating Wind Turbine Under Different Sea Conditions

Both numerical calculation and model test are important techniques to study and forecast the dynamic responses of the floating offshore wind turbine (FOWT). However, both the methods have their own limitations at present. In this study, the dynamic responses of a 5 MW OC3 spar-type floating wind turbine designed for a water depth of 200 m are numerically investigated and validated by a 1:50 scaled model test. Moreover, the discrepancies between the numerical calculations and model tests are obtained and discussed. According to the discussions, it is found that the surge and pitch are coupled with the mooring tensions, but the heave is independent of them. Surge and pitch are mainly induced by wave under wind wave conditions. Wind and current will induce the low-frequency average responses, while wave will induce the fluctuation ranges of the responses. In addition, wave will induce the wavefrequency responses but wind and current will restrain the ranges of the responses.     

Optimization Design of Minimum Total Resistance Hull Form Based on CFD Method

In order to reduce the resistance and improve the hydrodynamic performance of a ship, two hull form design methods are proposed based on the potential flow theory and viscous flow theory. The flow fields are meshed using body-fitted mesh and structured grids. The parameters of the hull modification function are the design variables. A three-dimensional modeling method is used to alter the geometry. The Non-Linear Programming (NLP) method is utilized to optimize a David Taylor Model Basin (DTMB) model 5415 ship under the constraints, including the displacement constraint. The optimization results show an effective reduction of the resistance. The two hull form design methods developed in this study can provide technical support and theoretical basis for designing green ships.     

Experimental Study on Sloshing Characteristics in the Elastic Tank Based on Morlet Wavelet Transform

Hydroelastic effect of sloshing is studied through an experimental investigation. Different excitation frequencies are considered with low-fill-depth and large amplitude. Morlet wavelet transform is introduced to analyze the free surface elevations and sloshing pressures. It focuses on variations and distributions of the wavelet energy in elastic tanks. The evolutions of theoretical and experimental wavelet spectra are discussed and the corresponding Fourier spectrums are compared. Afterwards, average values of the wavelet spectra are extracted to do a quantitative study at various points. From the wavelet analysis, sloshing energies are mainly distributed around the external excitation frequency and expanded to high frequencies under violent condition. In resonance, experimental wavelet energy of the elevation in elastic tanks is obviously less than that in the rigid one; for sloshing pressures, the elastic wavelet energy close to the rigid one and conspicuous impulse is observed. It recommends engineers to concern the primary natural frequency and impulsive peak pressures.     

Strength Analysis on Brace Structure for Semi-Submersible in Consideration of Wave Slamming

Slamming on bracings of column stabilized units shall be considered as a possible limiting criterion under transit condition based on the requirements in DNV-OS-C103. However, the wave slamming loads under survival condition were ignored for the strength analysis of the brace structures in many semi-submersible projects. In this paper, a method of strength analysis of brace structure is proposed based on the reconstruction and extrapolation of numerical model. The full-scale mooring system, the wind, wave and current loads can be considered simultaneously. Firstly, the model tests of the semi-submersible platform in wind tunnel and wave tanker have been carried out. Secondly, the numerical models of the platform are reconstructed and extrapolated based on the results of model tests. Then, a nonlinear numerical analysis has been conducted to study the wave slamming load on brace in semi-submersible platform through the reconstructed and extrapolated numerical model. For the randomness of wave load, ten subcases under each condition have been carried out. The value of the 90% Gumble distribution values of the ten subcases are used. Finally, the strength on brace structure has been analyzed considering the wave slamming. The wave slamming loads have been compared between the survival condition and transit condition with the method. The results indicate that wave slamming under survival condition is more critical than that under transit condition. Meanwhile, the wave slamming is significant to the structural strength of the brace. It should be overall considered in the strength analysis of the brace structure.     

Effect of upward internal flow on dynamics of riser model subject to shear current

Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.     

Silver in Tokyo Bay estuarine waters and Japanese rivers

Dissolved and particulate concentrations of silver in Tokyo Bay estuarine waters and Japanese rivers were determined in this study. The dissolved silver concentrations in the surface water of Tokyo Bay range from 5.9 to 15.1 pmol kg⁻¹, which is comparable to those in the surface water of the Japan Sea, but two or three times higher than those in the surface water of the open ocean. However, elevated concentrations of dissolved silver are not found in Tokyo Bay compared with those in other highly urbanized estuaries, such as San Francisco Bay (20∼243 pmol kg⁻¹). In the Tokyo Bay estuary, silver typically exhibits non-conservative mixing behavior, which is a common feature in the other estuaries reported previously. Dissolved silver concentrations decrease with salinity from the rivers to the mouth of Tokyo Bay. Silver is efficiently scavenged by suspended particulates, as evidenced by the high conditional distribution coefficients for silver throughout the estuary (log K_d > 5.0 ± 0.6). The silver fluxes into Tokyo Bay via inflowing rivers and atmospheric deposition were estimated as 83 kg y⁻¹ and 15 kg y⁻¹, respectively. A simple budget calculation shows that the silver supplied from rivers and atmosphere must be rapidly scavenged within the Tokyo Bay estuary.     

Dissolved inorganic carbon (DIC) and its carbon isotopic composition in sediment pore waters from the Shenhu area,northern South China Sea

The Shenhu area is one of the most favorable places for the occurrence of gas hydrates in the northern continental slope of the South China Sea. Pore water samples were collected in two piston cores (SH-A and SH-B) from this area, and the concentrations of sulfate and dissolved inorganic carbon (DIC) and its carbon isotopic composition were measured. The data revealed large DIC variations and very negative δ ¹³C-DIC values. Two reaction zones, 0–3 mbsf and below 3 mbsf, are identified in the sediment system. At site SH-A, the upper zone (0–3 mbsf) shows relatively constant sulfate and DIC concentrations and δ ¹³C-DIC values, possibly due to bioturbation and fluid advection. The lower zone (below 3 mbsf) displays good linear gradients for sulfate and DIC concentrations, and δ ¹³C-DIC values. At site SH-B, both zones show linear gradients, but the decreasing gradients for δ ¹³C-DIC and SO₄ ²⁻ in the lower zone below 3 mbsf are greater than those from the upper zone, 0–3 mbsf. The calculated sulfate-methane interface (SMI) depths of the two cores are 10.0 m and 11.1 m, respectively. The depth profiles of both DIC and δ ¹³C-DIC showed similar characteristics as those in other gas hydrate locations in the world oceans, such as the Blake Ridge. Overall, our results indicate an anaerobic methane oxidation (AMO) process in the sediments with large methane flux from depth in the studied area, which might be linked to the formation of gas hydrates in this area.