Evaluation of building fundamental periods and effects of local geology on ground motion parameters in the Siracusa area,Italy

The Siracusa area, located in the southeastern coast of Sicily (Italy), is mainly characterized by the outcropping of a limestone formation. This lithotype, which is overlain by soft sediments such as sandy clays and detritus, can be considered as the local bedrock. Records of ambient noise, processed through spectral ratio techniques, were used to assess the dynamic properties of a sample survey of both reinforced concrete and masonry buildings. The results show that experimental periods of existing buildings are always lower than those proposed by the European seismic code. This disagreement could be related to the role played by stiff masonry infills, as well as the influence of adjacent buildings, especially in downtown Siracusa. Numerical modeling was also used to study the effect of local geology on the seismic site response of the Siracusa area. Seismic urban scenarios were simulated considering a moderate magnitude earthquake (December 13th, 1990) to assess the shaking level of the different outcropping formations. Spectral acceleration at different periods, peak ground acceleration, and velocity were obtained through a stochastic approach adopting an extended source model code. Seismic ground motion scenario highlighted that amplification mainly occurs in the sedimentary deposits that are widespread to the south of the study area as well as on some spot areas where coarse detritus and sandy clay outcrop. On the other hand, the level of shaking appears moderate in all zones with outcropping limestone and volcanics.     

Testing a new sampler for measuring plot soil loss

In order to measure soil loss in equipped plots the estimate of the weight of solid material intercepted at their lower end is required. At the experimental area of Sparacia, Sicily, the runoff produced by an erosive event is collected within storage tanks with a capacity of about 1 m³. In this paper, the use of a new sampler is proposed to measure easily the weight of solid material eroded from an experimental plot and collected into a storage tank. The sampler is a cylinder having a closing valve at the bottom. Two different series of runs were carried out both to test the reliability of the sampler and to establish a sampling procedure, respectively. An analysis of various sampling configurations usable in the field differentiated by the number and location of sampling verticals in the tank cross‐section was finally carried out. The results of the present investigation are that the concentration measurement by the sampler was more accurate than that obtained by other methods involving a collection tank, agitation and sampling of the suspension. This sampler is cheap and usable in combination with a quick field sampling procedure which is particularly advisable when the number of plots equipped at an experimental area is large. The sampler was tested using a clay soil contained within cylinders and a cubic tank, but it appeared also to be usable with coarser sediment than clay and in combination with tanks having a different shape. Copyright © 2015 John Wiley & Sons, Ltd.     

An integrated approach for investigating geomorphic response to extreme events: methodological framework and application to the October 2011 flood in the Magra River catchment,Italy

A high‐magnitude flash flood, which took place on 25 October 2011 in the Magra River catchment (1717 km²), central‐northern Italy, is used to illustrate some aspects of the geomorphic response to the flood. An overall methodological framework is described for using interlinked observations and analyses of the geomorphic impacts of an extreme event. The following methods and analyses were carried out: (i) hydrological and hydraulic analysis of the event; (ii) sediment delivery by event landslide mapping; (iii) identification and estimation of wood recruitment, deposition, and budgeting; (iv) interpretation of morphological processes by analysing fluvial deposits; (v) remote sensing and geographic information system (GIS) analysis of channel width changes. In response to the high‐magnitude hydrological event, a large number of landslides occurred, consisting of earth flows, soil slips, and translational slides, and a large quantity of wood was recruited, in most part deriving from floodplain erosion caused by bank retreat and channel widening. The most important impact of the flood event within the valley floor was an impressive widening of the overall channel bed and the reactivation of wide portions of the pre‐event floodplain. Along the investigated (unconfined or partly confined) streams (total investigated length of 93.5 km), the channel width after the flood was up to about 20 times the channel width before the event. The study has shown that a synergic use of different methods and types of evidence provides fundamental information for characterizing and understanding the geomorphic effects of intense flood events. The prediction of geomorphic response to a flood event is still challenging and many limitations exist; however a robust geomorphological analysis can contribute to the identification of the most critical reaches. Copyright © 2016 John Wiley & Sons, Ltd.     

Identifying run‐off contributions during melt‐induced run‐off events in a glacierized alpine catchment

We analysed contributions to run‐off using hourly stream water samples from seven individual melt‐induced run‐off events (plus one rainfall event) during 2011, 2012 and 2013 in two nested glacierized catchments in the Eastern Italian Alps. Electrical conductivity and stable isotopes of water were used for mixing analysis and two‐component and three‐component hydrograph separation. High‐elevation snowmelt, glacier melt and autumn groundwater were identified as major end‐members. Discharge and tracers in the stream followed the diurnal variations of air temperature but markedly reacted to rainfall inputs. Hysteresis patterns between discharge and electrical conductivity during the melt‐induced run‐off events revealed contrasting loop directions at the two monitored stream sections. Snowmelt contribution to run‐off was highest in June and July (up to 33%), whereas the maximum contribution of glacier melt was reached in August (up to 65%). The maximum groundwater and rainfall contributions were 62% and 11%, respectively. Run‐off events were generally characterized by decreasing snowmelt and increasing glacier melt fractions from the beginning to the end of the summer 2012, while run‐off events in 2013 showed less variable snowmelt and lower glacier melt contributions than in 2012. The results provided essential insights into the complex dynamics of melt‐induced run‐off events and may be of further use in the context of water resource management in alpine catchments. Copyright © 2015 John Wiley & Sons, Ltd.     

Estimating rainfall erosivity by aggregated drop size distributions

Rainfall erosivity is defined as the potential of the rain to cause erosion, and it can be represented by rainfall kinetic power. At first in this paper, the raindrop size distributions (DSD) measured by an optical disdrometer located at Palermo in the period June 2006–March 2014 and aggregated for intensity classes, are presented. Then an analysis of raindrop size characteristics is carried out, and the reliability of Ulbrich's distribution, using both the maximum likelihood and momentum estimate parameter methods, is tested. The raindrop size measurements are used to determine the experimental rainfall kinetic power values, which are compared with the ones calculated by a theoretically deduced relationship. This analysis demonstrates that the kinetic power is strictly related to the median volume diameter of DSD. Finally, the reliability of the simplest Marshall and Palmer exponential DSD for estimating the rainfall kinetic power is demonstrated. Copyright © 2015 John Wiley & Sons, Ltd.     

The External Tanger Unit (Intrarif sub-Domain,External Rifian Zones,Morocco): an interdisciplinary study

The External Tanger Unit represents one of the most complete Cretaceous-Miocene successions in the central areas of the Internal Intrarif sub-Domain (External Rif Zones, Morocco). An interdisciplinary study has been carried out to propose a new characterization of this unit which would allow a better comprehension of the confused and complex relationships among different units of the same sub-domain. The results achieved can be summarized as follows: (1) redefinition of the stratigraphic (litho-, bio-, and chrono-) record and introduction of a new, informal lithostratigraphic terminology; (2) recognition of two main depositional sequences (lower-middle Eocene p.p. and lower Oligocene p.p.-lower Miocene p.p.) separated by extended gaps (latest Cretaceous-early Eocene p.p. and middle Eocene p.p.-early Oligocene p.p.); (3) reconstruction of the evolution of the sedimentary realm, and of the relationships between tectonics and sedimentation; and (4) comparison between the upper Cretaceous-Miocene stratigraphic record and tectonic events of the Intrarif, which is located in the western external portion of the Maghrebian Flysch Basin, and the equivalent sedimentary record of the eastern portion of this basin in the Tunisian Tell. More in general, our results allowed (i) a first reconstruction of the Cretaceous-Miocene main tectono-sedimentary events; (ii) a more detailed location of the sedimentary suite in the external African Margin in the context of a wider palaeogeographic framework; and (iii) the definition of the main stages of the geological evolution of the area.     

A hydrogeological conceptual model of the Suio hydrothermal area (central Italy)

A hydrogeological conceptual model has been developed that describes the hydrothermal system of Suio Terme (central Italy). The studied area is located along the peri-Tyrrhenian zone of the central Apennines, between the Mesozoic and Cenozoic carbonate platform sequences of the Aurunci Mountains and the volcanic sequences of the Roccamonfina. A multi-disciplinary approach was followed, using new hydrogeological surveys, the interpretation of stratigraphic logs of boreholes and water wells, and geophysical data—seismic sections, shear-wave velocity (Vs) crustal model and gravimetric model. The collected information allowed for construction of a conceptual hydrogeological model and characterization of the hydrothermal system. The Suio hydrothermal system is strongly influenced by the Eastern Aurunci hydrostructure. Along the southeastern side, the top of the hydrostructure sinks to ?1,000 m relative to sea level via a series of normal faults which give origin to the Garigliano graben. Geological and hydrogeological data strongly suggest the propagation and mixing of hot fluids, with cold waters coming from the shallow karst circuit. The aquitard distribution, the normal tectonic displacements and the fracturing of the karst hydrostructure strongly influence the hydrothermal basin. Carbon dioxide and other gasses play a key role in the whole circuit, facilitating the development of the hydrothermal system. The current level of knowledge suggests that the origin of the Suio hydrothermalism is the result of interaction between the carbonate reservoir of the Eastern Aurunci Mountains and the hot and deep crust of this peri-Tyrrhenian sector, where the Roccamonfina volcano represents the shallowest expression.     

Neural networks and landslide susceptibility: a case study of the urban area of Potenza

For those working in the field of landslide prevention, the estimation of hazard levels and the consequent production of thematic maps are principal objectives. They are achieved through careful analytical studies of the characteristics of landslide prone areas, thus, providing useful information regarding possible future phenomena. Such maps represent a fundamental step in the drawing up of adequate measures of landslide hazard mitigation. However, for a complete estimation of landslide hazard, meant as the degree of probability that a landslide occurs in a given area, within a given space of time, detailed and uniformly distributed data regarding their incidence and causes are required. This information, while obtainable through laborious historical research, is usually partial, incomplete and uneven, and hence, unsatisfactory for zoning on a regional scale. In order to carry this out effectively, the utilization of spatial estimation of the relative levels of landslide hazard in the various areas was considered opportune. These areas were classified according to their levels of proneness to landslide activity without taking recurrence periods into account. Various techniques were developed in order to obtain upheaval numerical estimates. The method used in this study, which was applied in the area of Potenza, is based on techniques derived from artificial intelligence (Artificial Neural Network—ANN). This method requires the definition of appropriate thematic layers, which parameterize the area under study. These are recognized by means of specific analyses in a functional relationship to the event itself. The parameters adopted are: slope gradient, slope aspect, topographical index, topographical shape, elevation, land use and lithology.     

The upper Miocene diatomaceous sediments of the northernmost Mediterranean region: A lamina-scale investigation of an overlooked palaeoceanographic archive

During the late Miocene the Mediterranean experienced a dramatic intensification of opaline accumulation, recorded by the deposition of diatomaceous sediments. The fine lamination of these deposits potentially records annual to sub-annual palaeoceanographic processes that occurred during a critical phase of the geodynamic evolution of the Mediterranean basin, which eventually led to the Messinian salinity crisis. The diatomaceous facies has been interpreted by previous researchers as the product of intensified upwelling currents and of bottom anoxia formation in the Mediterranean basin. However, until now, no efforts have been made to unravel the sedimentological and micropalaeontological content of these deposits at the lamina-scale. This paper presents the first case study of a systematic scanning electron microscope-based morphological investigation of the diatomaceous sediments deposited during the late Miocene at the northernmost offshoot of the Mediterranean basin (Piedmont Basin, north-west Italy). Using a non-invasive analytical approach, six faciological components (laminae, laminated packets, non-laminated intervals, burrows, opal-rich aggregates and mixed pelletal structures) and their relationships are described and interpreted herein. Following the lamina-scale study of these sediments, an annual sedimentary cycle could be identified and an accumulation rate (ca 50 cm kyr⁻¹) inferred that is atypical for a setting actively influenced by upwelling. The role played by the entanglement of diatom valves in creating a physical barrier to the bioturbation is here emphasized as the main process responsible for the preservation of the laminated fabric of diatomaceous sediments, challenging the supposed role of deep anoxia. These results suggest that the late Miocene diatomaceous deposition in the Piedmont Basin cannot be univocally considered as a by-product of upwelling intensification and seafloor oxygen depletion.