Correcting wind‐induced bias in solid precipitation measurements in case of limited and uncertain data

Automatic precipitation gauges tend to underestimate solid precipitation in the presence of wind. Loss as a function of wind speed is typically evaluated by comparing the gauge with a more accurate measurement made using a double‐fence intercomparison reference gauge (DFIR). For small precipitation events, small errors in the observations can induce large errors in the ‘catch’ ratio, i.e. the ratio of the automatic gauge measurement to the DFIR observation. For this reason, precipitation events of less than 3 mm are typically discarded before performing the regression analysis. This can mean discarding more than 90% of the observations. This paper shows how the method of weighted least squares can be used to perform a regression analysis that can take into account the whole sample to provide a more accurate estimation of the relationship between the catch ratio and the wind speed. This methodology is then used to obtain an adjustment curve for a shielded Geonor T‐200B precipitation gauge in Northern Québec. Copyright © 2008 John Wiley & Sons, Ltd and Her Majesty the Queen in right of Canada.     

A relative water-depth model for the Normandy Chalk (Cenomanian–Middle Coniacian,Paris Basin,France) based on facies patterns of metre-scale cycles

A relative water-depth model for the Chalk of the Paris Basin is proposed, based on the lateral variations of the high-frequency metre-scale cycles, which are characteristic features easily identified in the field. The studied outcrops are the Cenomanian–Middle Coniacian cliffs of Normandy. The main result of this study is to highlight the importance of storm activity in the deposition of the Chalk. The relative water-depth model is based on storm-induced shell concentrations observed within the two components of the metre-thick cycles: the depositional interval itself and the top hiatal surface.Six types of shell concentrations are defined, along with seven types of depositional facies making up the depositional units, as well as eight types of hiatal surface. Three cycle associations, differing in their thickness and the amount and type of non-carbonate constituents, can be identified in the Lower to Upper Cenomanian, the Upper Cenomanian to Lower Turonian and the Middle Turonian to Middle Coniacian.A relative water-depth profile model for all these cycles is based on the shell concentrations and a “water-depth equivalence” is proposed between the three cycle associations (lateral “facies” substitution diagram). This model is tested using palaeocological data (irregular echinoids) and by correlating field sections in terms of stacking patterns. Most of the studied deposits accumulated above the storm wave base (upper offshore zone or mid ramp).     

Early maturation processes in coal. Part 2: Reactive dynamics simulations using the ReaxFF reactive force field on Morwell Brown coal structures

This paper reports reactive dynamics (RD) simulations of a macro-model of Morwell Brown coal using the ReaxFF reactive force field. We find that these reactive MD simulations successfully reproduce thermal decomposition processes of defunctionalization, depolymerization and rearrangement of the residual structure observed in various experimental studies. For example, our simulations indicate that the decarboxylation and dehydroxylation of the lignin side chain of the Morwell model involves the formation of double bonds conjugated with the aromatic rings. The process of defunctionalization of the methoxy functions involving the formation of phenolic structures in the residue has been confirmed. We also observe that gaseous hydrocarbons are generated by cleavage of C–C bonds of the lignin side chain.The success in using ReaxFF RD to describe the molecular processes underlying the kinetics in pyrolysis of this model of coal plus the success of a similar previous study on the algaenan of Botryococcus braunii race L biopolymer model of kerogens suggests that such computation can be useful in providing molecular based kinetic models for other pyrolysis processes underlying the organic transformations in sedimentary materials.     

Numerical modelling of Alpine deep flow systems: a management and prediction tool for an exploited geothermal reservoir (Lavey-les-Bains, Switzerland)

The geothermal site of Lavey-les-Bains, Switzerland is an Alpine deep flow system in fractured crystalline rocks. Groundwater analyses since 1973 reveal a mixing process between a deep warm component (68°C and TDS 1.4 g/L) and cold shallow water. The production rate of the new deep well P600, installed in 1997, has amplified this mixing process in well P201, for which a decline in temperature and TDS has been observed. Numerical hydrogeological two-dimensional and three-dimensional models of heat, flow and mass transport have been developed to reproduce the geothermal system and to forecast the long-term exploitation potential of the geothermal resource. The computed temperature of the deep inferred reservoir (100–130°C) is in agreement with the geothermometers, whereas the simulated thermal water flux (5,400–9,000 m³/day) is probably underestimated. Different fluid production scenarios can reproduce the decline and stabilization phases of temperatures in the geothermal field since 1997. For P201, the mixing ratio calculated before and during the exploitation of P600 is comparable with observed data; the modelled temperature tends towards stabilization in P201 at 56°C after 10–15 years of production at P600. Another proposed new well is likely to reduce the thermal output of the existing wells.     

The effect of sudden critical and supercritical hydraulic loads on backward erosion piping: small-scale experiments

Acta Geotechnica - Backward erosion piping is an important failure mechanism for cohesive water-retaining structures which are founded on a sandy aquifer. This paper studies the effect of the...     

Monitoring Continental Surface Waters by Satellite Altimetry

The monitoring of continental water stages is a requirement for meeting human needs and assessing ongoing climatic changes. However, regular gauging networks fail to provide the information needed for spatial coverage and timely delivery. Although the space missions discussed here were not primarily dedicated to hydrology, 18 years of satellite altimetry have furnished complementary data that can be used to create hydrological products, such as time series of stages, estimated discharges of rivers or volume change of lakes, river altitude profiles or leveling of in situ stations. Raw data still suffer uncertainties of one to several decimeters. These require specific reprocessing such as waveform retracking or geophysical correction editing; much work still remains to be done. Besides, measuring the flow velocity appears feasible owing to SAR interferometer techniques. Inundated surfaces, and the time variations of their extent, are currently almost routinely computed using satellite imagery. Thus, the compilation of the continuous efforts of the scientific community in these various investigative directions, such as recording from space the discharges of rivers or the change in water volume stored in lakes, can be foreseen in the near future.     

Fundamentals Of Remote Sensing For Risks Assessment

Remote sensing instruments aboard satellites observe the properties (e.g., intensity) of electromagnetic radiation (e.g., from the Sun) backscattered and/or emitted by the surface. Thus, they record some information about the surface. Different information is obtained in the visible/near infrared, thermal infrared and microwave parts of the spectrum.     

Groundwater components in the alluvial aquifer of the alpine Rhone River valley, Bois de Finges area, Wallis Canton, Switzerland

Source, type, and quantity of various components of groundwater, as well as their spatial and temporal variations were determined by different hydrochemical methods in the alluvial aquifer of the upper Rhone River valley, Bois de Finges, Wallis Canton, Switzerland. The methods used are hydrochemical modeling, stable-isotope analysis, and chemical analysis of surface water and groundwater. Sampling during high- and low-water periods determined the spatial distribution of the water chemistry, whereas monthly sampling over three years provided a basis for understanding seasonal variability. The physico-chemical parameters of the groundwater have spatial and seasonal variations. The groundwater chemical composition of the Rhone alluvial aquifer indicates a mixing of weakly mineralized Rhone River water and SO₄-rich water entering from the south side of the valley. Temporal changes in groundwater chemistry and in groundwater levels reflect the seasonal variations of the different contributors to groundwater recharge. The Rhone River recharges the alluvial aquifer only during the summer high-water period. Electronic Publication