Description de deux nouvelles Cyclotelles (Bacillariophyceae) de milieux alcalins et eutrophes:Cyclotella costei nov. sp. etCyclotella wuethrichiana nov. sp.

Two new species of the genus Cyclotella are presented which have been discovered during ecological and paleoecological research studies in the littoral zone of two small alkaline eutrophic lakes in France (Lake Paladru) and in Switzerland (Lake Le Loclat). These new species are namedCyclotella costei nov. sp. andCyclotella wuethrichiana nov. sp.     

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.     

Insects as zoogeomorphic agents: an extended review

Insects are the largest and most diverse group of living organisms on Earth, playing a critical but underestimated role as agents of geomorphic change. Burrowing insects create micro-scale landforms such as subterranean tunnels and surface mounds and, by this way, exert an influence on hydrology, soil erosion and sediment transfer at a wider landscape scale. However, social insects represented by ants and termites were the main taxa studied as geomorphic agents and ecosystem engineers. This article proposes an extended and critical literature review of insects as zoogeomorphic agents, with reference to various taxonomic orders and families of insects having a burrowing behaviour. It provides a large overview of their primary and secondary impacts on Earth surface systems, both supported by naturalistic evidence and available quantitative data. Some evolutionary insights are discussed based on fossil evidence of geomorphic work by insects and, at finer temporal scale, on recent advances in radiometric and luminescence dating of insect mounds. Finally, this article explores the fruitful links between geomorphology and entomology, and suggests several research perspectives in order to develop an integrated understanding of the importance of insects in Earth surface processes and landforms. © 2020 John Wiley & Sons, Ltd.     

A discontinuous finite element baroclinic marine model on unstructured prismatic meshes

We describe the time discretization of a three-dimensional baroclinic finite element model for the hydrostatic Boussinesq equations based upon a discontinuous Galerkin finite element method. On one hand, the time marching algorithm is based on an efficient mode splitting. To ensure compatibility between the barotropic and baroclinic modes in the splitting algorithm, we introduce Lagrange multipliers in the discrete formulation. On the other hand, the use of implicit–explicit Runge–Kutta methods enables us to treat stiff linear operators implicitly, while the rest of the nonlinear dynamics is treated explicitly. By way of illustration, the time evolution of the flow over a tall isolated seamount on the sphere is simulated. The seamount height is 90% of the mean sea depth. Vortex shedding and Taylor caps are observed. The simulation compares well with results published by other authors.     

Interpreting a Pumping Test Influenced by Another Well in an Anisotropic Aquifer

In confined aquifers the influence of neighboring active wells is often neglected when interpreting a pumping test. This can, however, lead to an erroneous interpretation of the pumping test data. This article presents simple methods to evaluate the transmissivity tensor and storativity of an anisotropic confined aquifer when there is an interfering well in the neighborhood of the tested well. Two methods have been developed depending on whether the tested well or the interfering well is the first in operation. These new methods yield better estimates of the hydraulic parameters than when the influence of the interfering well is neglected. These methods have then been used on data obtained from numerical models with an interfering well and the results have been compared to an analytical method that neglects the influence of the interfering well. The methods require knowledge of the pumping rate of the interfering well and the time elapsed since the pumping started in each well. If the interfering well started pumping before the tested well, the method does not require knowledge of the aquifer piezometric level at the beginning of the test, which is often unknown in this case. As for the method without interference, at least three monitoring wells (MWs) are needed, the position of which influences the accuracy of the estimated parameters. Some recommendations concerning MWs position have been given to get more accurate results according to the sought parameter.     

Magnetostratigraphic correlation of the Oxfordian–Kimmeridgian boundary

A magnetic polarity pattern for Boreal and Sub-Boreal ammonite zones of the Upper Oxfordian to Lower Kimmeridgian was established and confirmed in four British sections, including the proposed Global Boundary Stratotype Section and Point (GSSP) on the Isle of Skye (Scotland) to define the base of the international Kimmeridgian Stage. A coeval pattern for Sub-Mediterranean ammonite zones was compiled from seven sections in Poland, one German section and multi-section composites from France and Spain. The mean paleopole for the European Craton (excluding Spain) at the Oxfordian–Kimmeridgian boundary is 74.2°N, 181.3°E (Α₉₅ = 3.8°). The common magnetic polarity scale enables inter-correlation of ammonite subzones among these three faunal provinces and to the marine magnetic-anomaly M-Sequence. The proposed GSSP at the base of the Pictonia baylei Zone is near the base of an extended interval dominated by reversed polarity, which is interpreted to be Chron M26r. This GSSP level projects to the lower to middle part of the Epipeltoceras bimammatum Subzone, which is the middle subzone of this E. bimammatum Zone in the Sub-Mediterranean standard zonation. In contrast, the traditional placement of the Oxfordian–Kimmeridgian boundary in that Sub-Mediterranean standard zonation (base of Sutneria platynota Zone) is at the base of Chron M25r, or nearly 1 million years younger.     

Trace Metal Solid State Speciation in Aerosols of the Northern Levantine Basin,East Mediterranean

An established three stage sequential leach scheme was applied to a series of selected high volume aerosol samples (n = 35) collected from the Turkish Eastern Mediterranean coastline (Erdemli). Samples were selected according to their air mass back trajectory history to reflect the contrasting mixtures of aerosol material present in the Eastern Mediterranean marine aerosol. Two populations were adopted, those samples which were classed as “anthropogenic” and those which were “Saharan” dominated aerosol populations. Applying the three stage leach it was possible to define the proportion for each of the considered metals (Al, Fe, Cu, Pb, Cd, Zn and Mn) present in the (a) “exchangeable” (b) “carbonate / oxide” and (c) “refractory” phases, representing novel solid state aerosol speciation data for this marine system. Clear trends were established, conforming with data from previous studies with mainly crustal derived metals (Al and Fe) being present in the refractory phases (Al > 88%; Fe > 84%) and those influenced by anthropogenic sources being dominating in the exchangeable phase, although for these metals the variability was comparatively high (12–64%; 19–85%; 40–100% for Zn, Pb and Cd, respectively). For the majority, greater exchangeable fractions were present the lower the crustal source contribution to the aerosol population, whereas the “refractory” fraction exhibited contrasting behaviour. This was illustrated by the novel application of the mixing diagram, presenting each of the three speciation stages against the corresponding percent anthropogenic contribution to each collected sample. Zn, Pb and Cd all illustrated progressive decrease in the percent exchangeable with increasing crustal contribution to the aerosol population. The percent exchangeable was discussed in terms of its use to represent the upper limit of the bioavailable fraction of metal associated with the aerosol, post deposition. The mixing diagram approach enabled the prediction of the residual fractions for Cd, Pb and Zn (41 ± 4%; 62 ± 4% and 82 ± 5%, respectively,) in Saharan end-member material.     

Evaluating the fitness for use of spatial data sets to promote quality in ecological assessment and monitoring

This article proposes and illustrates a practical methodological framework to evaluate the fitness for use of spatial data sets for environmental and ecological applications, focusing on user requirements for specified application contexts. The methodology is based on the use of metadata to analyze similarity between the data characteristics and the user’s needs or expectations for several quality indicators. Additionally, the concept of ‘critical factors’ is introduced in this framework, allowing users to define which quality indicators have greater importance given their own requirements or expectations and the specified application contexts. The proposed methodology further allows integrating and interconnecting the spatial data quality (SDQ) evaluation methodology with metadata geoportals in WebGIS platforms, facilitating its operation by users from non-spatial disciplines and with often limited expertise on this subject. Examples of the evaluation of fitness for use for specific application contexts within the project BIO_SOS (‘Biodiversity Multi-SOurce Monitoring System: From Space To Species’ FP7 project) are presented. By providing a prompt and straightforward evaluation tool, the proposed methodology can encourage the implementation of SDQ evaluation routines in ecological assessment and monitoring programs, promoting a more adequate use of geospatial data and ultimately contributing to well-supported policy and management decisions.     

The stratospheric version of LMDz: dynamical climatologies, arctic oscillation, and impact on the surface climate

A climatology of the stratosphere is determined from a 20-year integration with the stratospheric version of the Atmospheric General Circulation Model LMDz. The model has an upper boundary at near 65 km, uses a Doppler spread non-orographic gravity waves drag parameterization and a subgrid-scale orography parameterization. It also has a Rayleigh damping layer for resolved waves only (not the zonal mean flow) over the top 5 km. This paper describes the basic features of the model and some aspects of its radiative-dynamical climatology. Standard first order diagnostics are presented but some emphasis is given to the model’s ability to reproduce the low frequency variability of the stratosphere in the winter northern hemisphere. In this model, the stratospheric variability is dominated at each altitudes by patterns which have some similarities with the arctic oscillation (AO). For those patterns, the signal sometimes descends from the stratosphere to the troposphere. In an experiment where the parameterized orographic gravity waves that reach the stratosphere are exaggerated, the model stratosphere in the NH presents much less variability. Although the stratospheric variability is still dominated by patterns that resemble to the AO, the downward influence of the stratosphere along these patterns is near entirely lost. In the same time, the persistence of the surface AO decreases, which is consistent with the picture that this persistence is linked to the descent of the AO signal from the stratosphere to the troposphere. A comparison between the stratospheric version of the model, and its routinely used tropospheric version is also done. It shows that the introduction of the stratosphere in a model that already has a realistic AO persistence can lead to overestimate the actual influence of the stratospheric dynamics onto the surface AO. Although this result is certainly model dependent, it suggests that the introduction of the stratosphere in a GCM also call for a new adjustment of the model parameters that affect the tropospheric variability.     

Heat balance and eddies in the Peru-Chile current system

The Peru-Chile current System (PCS) is a region of persistent biases in global climate models. It has strong coastal upwelling, alongshore boundary currents, and mesoscale eddies. These oceanic phenomena provide essential heat transport to maintain a cool oceanic surface underneath the prevalent atmospheric stratus cloud deck, through a combination of mean circulation and eddy flux. We demonstrate these behaviors in a regional, quasi-equilibrium oceanic model that adequately resolves the mesoscale eddies with climatological forcing. The key result is that the atmospheric heating is large (>50 W m^?2) over a substantial strip >500 km wide off the coast of Peru, and the balancing lateral oceanic flux is much larger than provided by the offshore Ekman flux alone. The atmospheric heating is weaker and the coastally influenced strip is narrower off Chile, but again the Ekman flux is not sufficient for heat balance. The eddy contribution to the oceanic flux is substantial. Analysis of eddy properties shows strong surface temperature fronts and associated large vorticity, especially off Peru. Cyclonic eddies moderately dominate the surface layer, and anticyclonic eddies, originating from the nearshore poleward Peru-Chile Undercurrent (PCUC), dominate the subsurface, especially off Chile. The sensitivity of the PCS heat balance to equatorial intra-seasonal oscillations is found to be small. We demonstrate that forcing the regional model with a representative, coarse-resolution global reanalysis wind product has dramatic and deleterious consequences for the oceanic circulation and climate heat balance, the eddy heat flux in particular.