粉喷桩处理软基固结计算方法的探讨

根据实际的地基结构,在Terzaghi一维固结理论的基础上,建立粉喷桩复合地基桩间土的固结模型并求解;结合高等级公路粉喷桩加固路基工程实例,将理论计算值与现场试验结果进行沉降计算对比分析。     

双频激电法在云南新发地区的应用

经过在测区进行双频中梯测量,圈定了4个激电异常,综合测区岩石的电性、物性特征,对异常进行了推断和解释。根据所测量的视幅频率和视电阻率结果分析,双频激电法完适应于云南地形起伏较大的地区,并能取得良好的地质效果。     

REE, Mn, Fe, Mg and C, O Isotopic Geochemistry of Calcites from Furong Tin Deposit, South China: Evidence for the Genesis of the Hydrothermal Ore-forming Fluids

The Furong tin deposit in the central Nanling region, South China, consists of three main types of mineralization ores, i.e. skarn-, altered granite- and greisen-type ores, hosted in Carboniferous and Permian strata and Mesozoic granitic intrusions. Calcite is the dominant gangue mineral intergrown with ore bodies in the orefield. We have carried out REE, Mn, Fe, and Mg geochemical and C, and O isotopic studies on calcites to constrain the source and evolution of the ore-forming fluids. The calcites from the Furong deposit exhibit middle negative Eu anomaly (Eu/Eu*= 0.311–0.921), except for one which has an Eu/Eu* of 1.10, with the total REE content of 5.49–133 ppm. The results show that the calcites are characterized by two types of REE distribution patterns: a LREE-enriched pattern and a flat REE pattern. The LREE-enriched pattern of calcites accompanying greisen-type ore and skarn-type ore are similar to those of Qitianling granite. The REE, Mn, Fe, and Mg abundances of calcites exhibit a decreasing tendency from granite rock mass to wall rock, i.e. these abundances of calcites associated with altered granite-type and greisen-type ores are higher than those associated with skarn-type ores. The calcites from primary ores in the Furong deposit show large variation in carbon and oxygen isotopic compositions. The δ¹³C and δ¹⁸O of calcites are −0.4 to −12.7‰ and 2.8 to 16.4‰, respectively, and mainly fall within the range between mantle or magmatic carbon and marine carbonate. The calcites from greisen and altered granite ores in the Furong deposit display a negative correlation in the diagram of δ¹³C versus δ¹⁸O, probably owing to the CO₂-degassing of the ore-forming fluids. From the intrusion to wall-rock, the calcites display an increasing tendency with respect to δ¹³C values. This implies that the carbon isotopic compositions of the ore-bearing fluids have progressively changed from domination by magmatic carbon to sedimentary carbonate carbon. In combination with other geological and geochemical data, we suggest that the ore-forming fluids represent magmatic origin. We believe that the fluids exsolved from fractionation of the granitic magma, accompanying magmatism of the Qitianling granite complex, were involved in the mineralization of the Furong tin polymetallic deposit.     

Early Mesozoic deformations of the eastern Yanshan thrust belt, northern China

The Yanshan thrust belt (YTB) is located at the northern edge of the North China plate. Because of the intense thicking and subsequent delamination of the lithosphere in north China, geologists have been focused on the Late Mesozoic deformation in the Yanshan belt. The Yanshan belt has been regarded as part of a stable craton from the Proterozoic to the early Mesozoic. In this paper, the authors present that the Yanshan area was deformed during the early Mesozoic. This deformation could be related to ocean basin closure along the northern margin of North China, or related to the collision between the north China and Yangtze Plates along the Qinling-Dabie ultrahigh pressure belt. Three stages of early Mesozoic deformation are identified in the eastern Yanshan at Lingyuan County. The first stage is characterized by westward thrusting (D1), the second stage comprises a top-to-east thrust system (D2), and the third stage comprises extensional gravity-induced collapse and landsliding (D3). The timing of these evens is constrained by both the crosscutting relationships of faults and the isotopic dating of volcanic rocks and gravels. The D1 and D2 events took place in the Late Triassic and Early Jurassic, whereas D3 event occurred at the end of the Middle Jurassic. The Dengzhangzi formation was deposited during the D1–D2 period and recorded a rapid uplift, erosion, and deposition sequence. These early Mesozoic contractional deformations in the YTB were probably related to the closure of ancient Asian ocean and ancient Qinling ocean. The later crustal extension was caused by gravitational collapse of the eastern China plateau during early Mesozoic.     

四川盆地中二叠统栖霞组层序——岩相古地理

随着对四川盆地碳酸盐岩储集层的重视和大力勘探,中二叠统栖霞组发育的滩相储集层成为盆地内寻找新气源的有利层位之一。文中根据岩心观察、野外剖面实测和室内镜下岩石薄片鉴定分析,并结合各种沉积相标志研究,确定研究区栖霞组主要发育浅水型碳酸盐岩台地沉积,其可进一步划分为碳酸盐岩台地相及若干亚相和微相。以Vail的层序地层学理论为指导,通过以岩性—岩相转换界面为主的层序界面识别,确定栖霞组发育2个Ⅱ型三级层序,每个层序划分出TST和HST两个沉积体系域。在沉积相和层序地层学分析的基础上,以层序格架内体系域为编图单元,用"单因素分析多因素综合作图法"编制了各体系域的岩相古地理图并对其演化特征进行了分析。结合各相带储集物性特征,认为台缘滩和台内滩为最有利储集相带,尤以SQ2-HST滩相颗粒灰岩经过白云岩化改造后更具储集意义。     

南海北部深水西区中中新世混合沉积模式及控制因素

以新采集的地震资料为基础,对南海北部深水西区的混合沉积作了初步研究。混合沉积在地震剖面上表现为平行—亚平行,振幅强—中,频率中等及连续性中等的反射特征。混合沉积分布在研究区地震资料覆盖范围的西北角,发育规模较大,最大长度达44.7km,最大宽度33.2km,面积1084km2,最大厚度为138m,纵向上分布在中中新统梅山组。综合南海北部构造演化、地震勘探等研究成果,建立了混合沉积模式。该混合沉积分布于半深海沉积区,由其南东东方向的西沙—广乐台地提供碳酸盐岩碎屑(同时也提供部分硅质碎屑),由其西侧的中南半岛提供主要的硅质碎屑。在南海北部深水西区,控制混合沉积分布的主要因素为构造作用(包括海平面变化)、物源供给及水动力条件等三个方面,这三者之间又具有密切的内在联系。     

叠前弹性波阻抗反演在四川FL地区礁滩型储层预测中的应用

叠前弹性波阻抗反演对礁滩型储层的预测和流体识别较叠后声阻抗反演的可信度更高,可对含油气性进行半定量—定量描述。以四川FL地区礁滩型储层为重点,以叠前弹性波阻抗反演为技术路线,对该地区反演出的数据体进行交汇解释,预测出了该区礁滩型储层的平面分布特点,预测结果与该区仅有的两口钻井资料相吻合。实践表明,用交会法并结合对储层响应敏感的两个参数泊松比和剪切模量进行储层解释,可靠度较高。     

两种混养方式对异枝江蓠(Gracilaria bailinae)生长性能、表面附生细菌群落及抗生素抗性基因的影响

为揭示"鱼-藻"和"鱼-虾-藻"混养对异枝江蓠(Gracilaria bailinae)生长性能、表面附生细菌群落和抗生素抗性基因(antibiotic resistance genes,ARGs)的影响,阐明异枝江蓠表面附生细菌群落与生长性能、ARGs之间的关系,利用16S rDNA高通量测序技术和Real-time qPCR技术分析了异枝江蓠表面附生细菌群落和ARGs的组成与差异,冗余分析(RDA)探讨细菌群落与生长性能、ARGs之间的关联。结果表明:(1)"鱼-虾-藻"混养会促进异枝江蓠的生长性能,增加表面附生细菌群落的多样性。(2)异枝江蓠表面附生细菌群落主要属于变形菌门、蓝藻门、浮霉菌门和拟杆菌门,不同混养方式中优势菌属组成不同,"鱼-虾-藻"混养优势菌属多样性较高。(3)"鱼-虾-藻"混养的异枝江蓠ARGs/MGEs的相对丰度大多高于"鱼-藻"混养。(4)RDA分析表明,生长性能主要与Ralstonia、Blastopirellula等显著相关,ARGs/MGEs主要与Nitrosomonas、Alteromonas、Pleurocapsa;CC-7319等显著相关。"鱼-虾-藻"混养能够增强异枝江蓠的生长性能,提高异枝江蓠表面附生细菌群落的多样性。但"鱼-虾-藻"混养能够增加异枝江蓠ARGs/MGEs的相对丰度,存在一定的生态风险。因此,在注重经济效益的同时也要关注可能存在的对人类健康的危害。研究结果将有助于海水养殖环境的优化,为大型海藻在海水养殖业中的应用与推广提供理论基础。     

Experimental Study of Overtopping on Sea Dikes and Coastal Flooding Under the Coupled Processes of Tides and Waves

Storm surges are cataclysmic natural disasters that occur along the coasts and are usually accompanied by large waves. The effects of coupled storm surges and waves can pose a significant threat to coastal security. Previous laboratory studies on the effects of storm surges and waves on coastal structures have typically utilized steady water levels and constant wave elements. An indoor simulation of the coupled processes of tides and waves is developed by adding a tide generation system to an existing laboratory wave basin to model continuous dynamic tide levels so that tide generation and wave-making occur synchronously in the pool. Specific experimental methods are given, which are applied to further study waves overtopping on artificial sea dikes and coastal flooding evolution under the coupled actions of tides and waves. The results of the overtopping discharge obtained by the test with a dynamic water level are compared with those obtained from steady water level tests and the existing empirical formula. In addition, the impacts of ecological coastal shelterbelts and structures on coastal flood processes and distributions are also investigated. The proposed simulation methods provide a new approach for studying the effects of storm surges and waves on coastal areas. The study also aims to provide a reference for coastal protective engineering.

     

Efficient building facade structure extraction method using image-based laser point cloud

Facade structures from three-dimensional (3D) point cloud data (PCD) and two-dimensional (2D) optical images can provide significant information for 3D building modeling. However, a unified data model for integrating 2D imagery pixels and 3D PCD is absent in current methods, leading to a complex implementation process, large calculations, and inefficiency. An efficient facade structure extraction method for building facades is proposed in this study. Based on the conversion matrix, 2D image and 3D PCD information are merged to build an image-based laser point cloud (ILPC) data model first. Second, both the line segment detection and random sample consensus algorithms are improved according to the structure and characteristics of the ILPC data model. Finally, building facade structures are extracted and optimized. Facade structures can be extracted accurately and efficiently by the proposed method, which contains rich information support from the ILPC data model. The proposed method extracts fine building facade structures with accuracy over 0.68 in all experiments and recall up to 0.81, which are better than the Wang method. Extracted structures constitute valuable support for numerous fields, such as 3D building modeling and building information modeling construction.