Measurement of natural stresses in a Provence mine (Southern France)

Stress measurements were carried out in the Arc syncline using drifs in a lignite mine. Eleven sites were investigated using the flat jack and hydraulic fracturing (or stimulating) methods. Two stress states were found to coexist, one isotropic, the other highly anisotropic. The orientations of the principal stresses are not homogeneous and an orientation ranging from E-W to NE-SW predominates locally. This does not accord with the regional stress field. The vertical stresses are systematically underestimated.     

L'accident du Toulourenc : une limite tectonique entre la plate-forme provençale et le Bassin vocontien à l'Aptien–Albien (SE France)

The WNW–ESE trending Toulourenc Fault Zone (TFZ) is the western segment of the major Ventoux–Lure Fault Zone, which separates the Provençal platform from the Baronnies Vocontian Basin. The TFZ was subject to polyphased Mid-Cretaceous movements, during the Early Aptian and Middle–Late Albian times. The latter faulting episode generated conglomerates and olistoliths resulting from dismantled faultscarps cutting Barremian–Bedoulian limestones. The deformation is related to compressional wrench faulting (NE–SW sinistral faults; dextral component for the TFZ). It induced the uplift of the northwestern corner of the platform, as indicated by a mid-Cretaceous hiatus (Early Aptian pro parte to Early Albian) narrowly delimited in space. The opening of submeridian grabens within the platform favoured the northward transit of channelised coarse-grained Albian sands originating from a southern area. To cite this article: C. Montenat et al., C. R. Geoscience 336 (2004).     

Evolution of a Holocene banner bank controlled by morphodynamics and structural setting of a macrotidal coast: Saint-Brieuc Bay(NW-Europe)

The morphology and internal structure of the Horaine Bank(Bay of Saint-Brieuc, NW France) are described based on multibeam echosounder and high-resolution seismic datasets coupled with vibro-core data. The Horaine Bank shows large-scale bedforms in the lee of a submerged rocky shoal, which allowed defining it as a Banner Bank.The internal structure of the sandbank reveals four seismic units(U1–U4) on a Cambrian basement(U0). The basal unit U1 is interpreted as reworked lowstand fluvial sediments those infilled micro incised valleys during a rise in sea level. This unit is overlain by paleo-coastal barrier sand-spit(U2) whose development was controlled by swell in the context of a rapid rise in sea level. The successive prograding unit(U3) is interpreted as flooding deposits in continuity with unit U2. The unit U4 is characterized by oblique reflectors oriented in two opposite directions. This last unit, dated post 3500 yr BP, corresponds to migrating dunes superimposed on the bank and observable in the high-resolution bathymetric data. The strong correlation between tidal currents and the apparent clockwise migration of dune crests suggests the presence of a tidal gyre controlling the present-day dynamics of most of the Horaine bank dunes. This study proposes a new model for the construction of banner banks characterized by the gradual transition of a sand spit to a banner bank during marine transgression and ensuing hydrodynamic variability.     

Trace-element-rich brines in eclogitic veins: implications for fluid composition and transport during subduction

Primary and pseudosecondary fluid inclusions occur in oscillatory-and sector-zoned omphacite in eclogitic veins from the Monviso ophiolitic complex in the Western Alps. The inclusions contain aqueous brines and daughter crystals of halite, sylvite, calcite, dolomite, albite, anhydrite and/or gypsum, barite, baddeleyite, rutile, sphene, Fe oxides, pyrite and monazite. This daughter mineral suite indicates high solubilites of Na, K, Ca, Mg, Fe, Zr, Ti, P, Ba, Ce, La, Th, and S species and provides direct evidence for transport of high-fieldstrenght, large-ion-lithophile, and light-rare-earth elements as dissolved species during subduction. Fluid-inclusion heterogeneities preserved within and between adjacent grains in the veins, however, suggest that the scale of fluid equilibration was small. A crack-seal geometry in some of the veins implies that fluid release in pulses rather than steady flow controlled mineral deposition and growth in the veins. From these observations, we develop a model of fluid release and entrapment in which pulses of fluid are associated in time with increments of shear and tensile failure; the rate of fluid release and the reduction in porosity both depend on the rate of plastic flow. Vein fluids may initially be derived from decreptitation of early fluid inclusions in the host eclogites, Small-scale fluid heterogeneities implied by the fluid inclusions in the veins are best interpreted in terms of limited fluid flow, and hence limited metasomatism. We conclude that element recycling into the mantle wedge during subduction will depend at least as strongly on fluid transport mechanisms as on element solubilities in the fluid phase. At Monviso, despite evidence for high trace element solubilities in saline brines, the elements were not removed from the downgoing slab prior to teaching depths of 40 km.     

An empirical approach to estimating population parameters from censored fracture-length distributions

Most fracture data sets are length-censored because of incomplete exposure at the surface, so estimating values of parameters of the sampled populations is difficult. Unless the form of the distribution function of the population is known, or one which is analytically tractable is assumed, length-censoring presents formidable problems in determining population parameters. Tests conducted on experimental fracture patterns developed in clay samples subjected to simple shear loading are the basis of a distribution-free way to estimate population parameters. Comparison of random samples of censored and uncensored fracture lengths shows that a useful, homogeneous data set consists of those cracks which lie entirely within the sampling area (two-ended cracks). The properties of this data set can be used to estimate the mean and variance of uncensored data. Estimates of the maximum fracture length of uncensored data, using the variance and maximum length of these two-ended cracks, show good agreement with measured values. Knowledge of the mean, variance, and maximum value of fracture-length populations are of interest in engineering and hydraulic studies, as well as in remote sensing studies of the Earth and other planets. Application of these results to data on rock masses are subject to the caveat that different crack-growth mechanisms in clay and rock may affect the accuracy of the calculations.     

Fluid composition and evolution in coesite-bearing rocks (Dora-Maira massif,Western Alps): implications for element recycling during subduction

Fluid inclusions and F, Cl concentration of hydrous minerals were analysed in the coesite-pyrope quartzite, the interlayered jadeite quartzite and their country-rock gneiss from the Dora-Maira massif using a combination of microthermometry, Raman spectrometry, synchrotron X-ray microfiuorescence and electron microprobe analysis. Three populations of fluid inclusions were recognized texturally and can be related to distinct metamorphic stages. A low-salinity aqueous fluid occurs in the retrogressed country gneiss and as late secondary inclusions in jadeite quartzite and chloritized pyrope. An earlier secondary population is found in matrix quartz of the jadeite- and pyro-pe-quartzites. This population can be related to the early decompression and so to incipient breakdown of garnet into phlogopite-bearing assemblages. The inclusion fluid is highly saline (up to 84 wt% equivalent NaCl) and contains Na, Ca, Fe, Cu and Zn as major cations. In pyrope quartzite, additional K was found in these brines, which locally coexist with CO₂-rich inclusions. The oldest fluid inclusions are preserved in kyanite grains included in fresh pyrope and in pyrope itself. In pyrope, all inclusions have decrepitated and contain magnesite, an Mg-phosphate, sheet-silicate(s), a chloride and an opaque phase, with no fluid preser ved. In contrast, the kyanite inclusions in pyrope preserve primary H₂O-CO₂ low-salinity fluid inclusions, probably owing to the low compressibility of the kyanite inclusions and host garnet. In spite of in-situ re-equilibration, these inclusions can be interpreted as relics of the dehydration fluid that attended pyrope growth. These correlations between textural and chemical fluid inclusion data and metamorphic stages are consistent with the fluid composition calculated from the halogen content of different generations of phlogopite and biotite. The preservation of different fluid compositions, both in time and space, is evidence for local control and possibly origin of the fluids, in agreement with isotopic data. These results, in particular the absence of CO₂ in the jadeite quartzite, are best interpreted in terms of a fluid-melt system evolution. With increasing metamorphism, partitioning of H₂O, Na, Ca, Fe and heavy metals into melt (jadeite quartzite) and Mg, Na/K, F, CO₂ and P(?) into a residual aqueous fluid can account for depletion in Na, Ca and Fe of the pyrope quartzite. During the retrograde path, a _{H 2 O} rose as melt crystallized, generating the two populations of hypersaline and water-rich fluids that were highly reactive to pyrope. The process of fluid-melt interaction envisioned here coupled with models of melt extraction in subduction zones provides an attractive opportunity for the instantaneous ( < 1 Ma) and selective transport of elements between a downgoing slab and the overlying mantle wedge.     

Quasi-hydrostatic compression of ruby to 500 Kbar

Measurements of the cell parameters of ruby to 500 Kbar under quasi-hydrostatic conditions in a diamond-anvil cell show a practically isotropic compression, the ratio c/a of the hexagonal cell parameters remaining constant. These results are consistent with previous single-crystal measurements below 100 Kbar as well as with ultrasonic elastic-constant measurements. There is no evidence for significant differences between the bulk moduli of ruby and corundum, and a review of compression and ultrasonic data yield Ko = 2.53±0.01 Mbar and Ko = 5.0 ± 0.4. Good agreement with the experimental values is found for compressions calculated from empirically or theoretically determined elastic properties.     

Landslide susceptibility deterministic approach using geographic information systems: application to Breaza town, Romania

The study is a deterministic-based approach on landslide susceptibility. The purpose of the paper is to create quantitative susceptibility maps by joining the one-dimension infinite slope stability model with a raster-based GIS (ILWIS) and taking into account the spatial distribution of input parameters. A landslide-prone area, with relative homogeneous geology and geomorphology, located in the Subcarpathian sector of the Prahova River, Romania, was selected for the study. There are frequent problems caused by active landslides in the studied area, especially in years with heavy precipitation, often causing destruction of houses and roads situated on the slopes (1992, 1997, and 2005). Detailed surveys covering a 7-year period provided the necessary input data on slope parameters, hydrological components, and the geotechnical background. Two simulations were used: one on dry soil conditions and one on fully saturated soil conditions. A third test was based on the level of the groundwater table mapped in summer 2008. Detailed analyses were particularly focused on landslides to compare predicted results with actual results using field measurements. The model is very suitable for use in raster GIS because it can calculate slope instability on a pixel basis, each raster cell being considered individually. The drawback of the model is the highly detailed data of input parameters. Despite this disadvantage, in conclusion, the usefulness of slope stability models on a large-scale basis was emphasized under infinitely high failure plain conditions and lithological homogeneity.     

Applications géodésiques du système DORIS à l'Institut géographique national

IGN is in charge of the installation and maintenance of the DORIS orbit determination network. More recently, in collaboration with JPL, precise geodetic computations were performed. The goal of this paper is to recall the various historic contributions of IGN to the DORIS system in their international context and then to describe a new estimation technique developed for a multi-satellite mode, making full profit of a better modeling for satellites and ground clocks as well as tropospheric correction parameters. Derived geodetic results demonstrate a precision in the order of 1 cm for station positions. To cite this article: P. Willis et al., C. R. Geoscience 337 (2005).     

Heat capacity of liquid silicates: new measurements on NaAlSi3O8 and K2Si4O9

Drop calorimetric measurements of H_T-H₂₇₃ are reported for glassy and liquid albite and potassium tetrasilicate for the temperature interval 600–1500 K. Analysis of these observations as well as data for 13 other stable and supercooled silicate liquids suggests strongly that the isobaric heat capacities of stable and supercooled liquids are equal and thus temperature independent. Available evidence indicates that the isochoric heat capacities of liquid alkali silicates are also temperature independent within present experimental uncertainties.