Exceptional fidelity of preservation in a reworked fossil,Chalk drift,South London,England

Reworking of fossils commonly leads to loss of morphological detail and inferior preservation; the main contributions of such specimens to geology are in sedimentology, regional geology and neoichnology. A reworked specimen of the Late Cretaceous (chalk) sponge boring Entobia cretacea Portlock is unusually well preserved. This specimen is from superficial deposits and is well enough preserved that delicate apertural and intercameral canals are apparent. Two factors are recognized as important in maintaining the fine features of this trace fossil: preservation in flint and, presumably, minimal fluvial transport. Copyright © 2013 John Wiley & Sons, Ltd.     

Structural inversion and its controls : examples from the Alpine foreland and the French Alps

Abstract

Positive structural inversion involves the uplift of rocks on the hanging-walls of faults, by dip slip or oblique slip movements. Controlling factors include the strike and dip of the earlier normal faults, the type of normal faults — whether they were listric or rotated blocks, the time lapsed since extension and the amount of contraction relative to extension. Steeply dipping faults are difficult to invert by dip slip movements; they form buttresses to displacement on both cover detachments and on deeper level but gently inclined basement faults. The decrease in displacement on the hanging-walls of such steep buttresses leads to the generation of layer parallel shortening, gentle to tight folds — depending on the amount of contractional displacement, back-folds and back-thrust systems, and short-cut thrust geometries — where the contractional fault slices across the footwall of the earlier normal fault to enclose a “floating horse”. However, early steeply dipping normal faults readily form oblique to strike slip inversion structures and often tramline the subsequent shortening into particular directions.

Examples are given from the strongly inverted structures of the western Alps and the weakly inverted structures of the Alpine foreland. Extensional faulting developed during the Triassic to Jurassic, during the initial opening of the central Atlantic, while the main phases of inversion date from the end Cretaceous when spreading began in the north Atlantic and there was a change of relative motion between Europe and Africa. During the mid-Tertiary well over 100 km of Alpine shortening took place; Alpine thrusts, often detached along, or close to, the basement-cover interface, stacking the late Jurassic to Cretaceous sediments of the post-extensional subsidence phase. These high level detachments were joined and breached by lower level faults in the basement which, in the external zones of the western Alps, generally reactivated and rotated the earlier east dipping half-graben bounding faults. The external massifs are essentially uplifted half-graben blocks. There was more reactivation and stacking of basement sheets in the eastern part of this external zone, where the faults had been rotated into more gentle dips above a shallower extensional detachment than on the steeper faults to the west.

There is no direct relationship between the weaker inversion of the Alpine foreland and the major orogenic contraction of the western Alps; the inversion structures of southern Britain and the Channel were separated from the Alps by a zone of rifting from late Eocene to Miocene which affected the Rhone, Bresse and Rhine regions. Though they relate to the same plate movements which formed the Alps, the weaker inversion structures must have been generated by within plate stresses, or from those emanating from the Atlantic rather than the Tethyan margin.     

Farmer-driven Innovation in New South Wales,Australia

Knowledge generation and the interactions that allow for knowledge exchange are key processes of innovation. Yet these processes are not well understood at the farm level, nor are they well reflected in policy approaches for agricultural innovation. Farmers in New South Wales have used diverse ways to implement innovations in land management. They employ a range of strategies including observing signals from the landscape, independent testing and trialling, use of agronomists, participation in farmer groups and in farmer-driven research programmes. Steps to foster farmer-driven innovations and knowledge-intensive agricultural systems require greater subtlety to enable flexibility, the incorporation of contemporary scientific knowledge and support for sustainable initiatives. More research on innovation and on policy engagement is required to foster on-farm innovative capacity.     

Adaptation of water resources systems to changing society and environment: a statement by the International Association of Hydrological Sciences

ABSTRACT

We explore how to address the challenges of adaptation of water resources systems under changing conditions by supporting flexible, resilient and low-regret solutions, coupled with on-going monitoring and evaluation. This will require improved understanding of the linkages between biophysical and social aspects in order to better anticipate the possible future co-evolution of water systems and society. We also present a call to enhance the dialogue and foster the actions of governments, the international scientific community, research funding agencies and additional stakeholders in order to develop effective solutions to support water resources systems adaptation. Finally, we call the scientific community to a renewed and unified effort to deliver an innovative message to stakeholders. Water science is essential to resolve the water crisis, but the effectiveness of solutions depends, inter alia, on the capability of scientists to deliver a new, coherent and technical vision for the future development of water systems.

EDITOR D. Koutsoyiannis; ASSOCIATE EDITOR not assigned     

Interannual variability of Pacific Winter Water inflow through Barrow Canyon from 2000 to 2006

We examined the interannual variability of Pacific Winter Water (PWW), both upstream in the northeastern Chukchi Sea and Barrow Canyon using mooring observations from 2000 to 2006, and downstream in the Canada Basin using hydrographic data acquired in 2002–2006. The interannual variation of PWW salinity is governed by two factors: (1) variability in the salinity of Pacific Water that flows northward through Bering Strait in winter; and (2) the input of salt associated with sea ice formation during winter in an intermittent coastal polynya located along the Alaskan coast between Cape Lisburne and Point Barrow. During the winters of 2000/2001 and 2001/2002 an increased transport of cold and saline PWW (S?>?33.5) to the basin via Barrow Canyon was observed. In 2000/2001 enhanced ice formation in the polynya contributed to the increased salinity of PWW, whereas in 2001/2002 the salinity of water entering through the Bering Strait was higher, and this resulted in more saline PWW being delivered to the basin. In the following four winters (2002/2003, 2003/2004, 2004/2005 and 2005/2006) the transport of cold and saline PWW in winter to the basin was less than that in the two preceding winters. In three of these four winters (2003/2004 being the exception) the coastal polynya was less active, thus reducing the input of salt due to brine enrichment. In the winter of 2003/2004, however, warmer water within the polynya region constrained ice formation and thus less cold and saline PWW was produced, despite the fact that the coastal polynya was active and frequently open.     

Origin of light volatile hydrocarbon gases in mud volcano fluids, Gulf of Cadiz — Evidence for multiple sources and transport mechanisms in active sedimentary wedges

Widespread mud volcanism across the thick (≤ 14 km) seismically active sedimentary prism of the Gulf of Cadiz is driven by tectonic activity along extensive strike–slip faults and thrusts associated with the accommodation of the Africa–Eurasia convergence and building of the Arc of Gibraltar, respectively. An investigation of eleven active sites located on the Moroccan Margin and in deeper waters across the wedge showed that light volatile hydrocarbon gases vented at the mud volcanoes (MVs) have distinct, mainly thermogenic, origins. Gases of higher and lower thermal maturities are mixed at Ginsburg and Mercator MVs on the Moroccan Margin, probably because high maturity gases that are trapped beneath evaporite deposits are transported upwards at the MVs and mixed with shallower, less mature, thermogenic gases during migration. At all other sites except for the westernmost Porto MV, δ¹³C–CH₄ and δ²H–CH₄ values of ~ − 50‰ and − 200‰, respectively, suggest a common origin for methane; however, the ratio of CH₄/(C₂H₆ + C₃H₈) varies from ~ 10 to > 7000 between sites. Mixing of shallow biogenic and deep thermogenic gases cannot account for the observed compositions which instead result mainly from extensive migration of thermogenic gases in the deeply-buried sediments, possibly associated with biodegradation of C₂₊ homologues and secondary methane production at Captain Arutyunov and Carlos Ribeiro MVs. At the deep-water Bonjardim, Olenin and Carlos Ribeiro MVs, generation of C₂₊-enriched gases is probably promoted by high heat flux anomalies which have been measured in the western area of the wedge. At Porto MV, gases are highly enriched in CH₄ having δ¹³C–CH₄ ~ − 50‰, as at most sites, but markedly lower δ²H–CH₄ values < − 250‰, suggesting that it is not generated by thermal cracking of n-alkanes but rather that it has a deep Archaeal origin. The presence of petroleum-type hydrocarbons is consistent with a thermogenic origin, and at sites where CH₄ is predominant support the suggestion that gases have experienced extensive transport during which they mobilized oil from sediments ~ 2–4 km deep. These fluids then migrate into shallower, thermally immature muds, driving their mobilization and extrusion at the seafloor. At Porto MV, the limited presence of petroleum in mud breccia sediments further supports the hypothesis of a predominantly deep microbial origin of CH₄.     

A late Pleistocene steppe bison (Bison priscus) partial carcass from Tsiigehtchic, Northwest Territories, Canada

A partial steppe bison (Bison priscus) carcass was recovered at Tsiigehtchic, near the confluence of the Arctic Red and Mackenzie Rivers, Northwest Territories, Canada in September of 2007. The carcass includes a complete cranium with horn cores and sheaths, several complete post-cranial elements (many of which have some mummified soft tissue), intestines and a large piece of hide. A piece of metacarpal bone was subsampled and yielded an AMS radiocarbon age of 11,830 ± 45 ¹⁴C yr BP (OxA-18549). Mitochondrial DNA sequenced from a hair sample confirms that Tsiigehtchic steppe bison (Bison priscus) did not belong to the lineage that eventually gave rise to modern bison (Bison bison). This is the first radiocarbon dated Bison priscus in the Mackenzie River valley, and to our knowledge, the first reported Pleistocene mammal soft tissue remains from the glaciated regions of northern Canada. Investigation of the recovery site indicates that the steppe bison was released from the permafrost during a landslide within unconsolidated glacial outwash gravel. These data indicate that the lower Mackenzie River valley was ice free and inhabited by steppe bison by 11,800 ¹⁴C years ago. This date is important for the deglacial chronology of the Laurentide Ice Sheet and the opening of the northern portal to the Ice Free Corridor. The presence of steppe bison raises further potential for the discovery of more late Pleistocene fauna, and possibly archaeological evidence, in the region.