Heavy metals in sediments and their bioaccumulation in <Emphasis Type="Italic">Phragmites australis</Emphasis> in the Anzali wetland of Iran

Accumulation of metals in both sediments and Phragmites australis organs was studied. Samples were collected from seven stations located in Anzali wetland, Iran. The samples were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The results showed that concentration of the studied metals (except As and Cd) were higher in sediments than in P. australis organs. Metal accumulation was found to be significantly (P <0.05) higher in roots than in above-ground organs of P. australis. The bioaccumulation factor (BAF) and the transfer factor (TF) also verified the highest rate of metal accumulation in roots and their reduced mobility from roots to the above-ground organs. Pearson correlation coefficient showed significant relationships between metal concentrations in sediments and those in plant organs. It should be pointed out that sediment and plant samples exhibited higher metal concentrations in eastern and central parts than in western and southern parts of the wetland. The mean concentrations of all studied elements (except for Fe, V and Al) were higher in these sediment samples than in the Earth’s crust and shale. High accumulation of metals in P. australis organs (roots and shoots) is indicative of their high bioavailability in sediments of the wetland. The correlation between metal concentrations in sediments and in P. australis indicates that plant organs are good bioindicators of metal pollution in sediments of Anzali wetland.     

Fractal-like adsorption kinetics of Pb^2＋ in rocks

The adsorption kinetics of Pb^2＋ in rocks has been studied using ion selective electrodes and atomic absorption spectrophotometer. The results showed that the adsorption process is a fractal-like reaction. The adsorption rate was relatively high before 30 minutes, and then dropped. The saturated adsorption capacity （a） of Pb^2＋ and kinetic parameters （b, a, D and k） increased with increasing initial concentrations of Pb^2＋. These parameters （except a） decreased while Na^＋ was present in the solution. Furthermore, the smaller the rocks were in grain size, the bigger these kinetic parameters would be, though the parameter a was almost constant.     

Suitability analysis for sand and gravel extraction site location in the context of a sustainable development in the surroundings of Zaragoza (Spain)

Zaragoza city is located in the central Ebro Basin, in the Iberian Peninsula. The fluvial terraces formed by the Ebro River present a valuable resource of sand and gravel deposits. However, taking advantage of these available resources implies conflicts with other land use interests like urban and industrial development as well as agricultural use, which has also traditionally occupied the alluvial terraces. These deposits represent a substantial groundwater resource that should be preserved for future generations. The development of spatial decision support systems (SDSS) has greatly assisted efforts for solving land-use conflicts. These systems combine the benefits of geographic information systems (GIS) and decision support methodologies and are therefore suitable to manage sustainable development of urban areas. In this contribution, an extraction suitability map taking into consideration a variety of environmental criteria is created with the help of a SDSS. The method used is the analytical hierarchy process which is integrated in ArcGIS. Areas most suitable to sand and gravel extraction are located in the high terraces, and in those terraces covered by pediments where the thickness of resource is relatively high. These areas are far from valuable natural areas, outside areas most vulnerable to groundwater contamination, and beneath soils with poor irrigation characteristics.     

2-D deformation analysis of a half-space due to a long dip-slip fault at finite depth

Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and depth of the upper edge of the fault. The effect of dip angle and depth of the upper edge of the fault on stresses and displacements is studied numerically and the results obtained are presented graphically. Contour maps for stresses and displacements are also presented. The results of Rani and Singh (1992b) and Freund and Barnett (1976) have been reproduced.     

Timeslot scheduling of inter-satellite links based on a system of a narrow beam with time division

An inter-satellite link (ISL) can enhance the performance of a global navigation satellite system. The system of narrow beams with time division is being increasingly used for ISLs. ISLs improve the performance of global navigation satellite systems via ranging and communication between satellites. When there are fewer antenna beams than targets, how to schedule timeslots for inter-satellite links to better perform the function of ISLs can become a problem. We describe the timeslot scheduling problem and propose a new method based on grouping to solve this problem of obtaining more range observations in a short time and communicating with a short delay between satellites and facilities. A series of 10,080 benchmarks of a typical constellation of a global navigation satellite system was run to demonstrate the feasibility of the proposed method. The regression cycle of constellations under test lasted approximately 7 days. The proposed schedule has a communication delay of less than 10 s and obtains more than nine different range observations in 60 s. Results show that the method effectively solves the scheduling problem and increases the scheduling success ratio remarkably.     

The Characteristic Patterns of Macrofaunal Fouling Assemblages in Nearshore Waters of the South China Sea

The spatio-temporal patterns of macrofaunal fouling assemblages were quantitatively investigated in the nearshore waters of the South China Sea. The work was undertaken by deploying seasonal panels at two sites (H-site, L-site) for one year, and the fouling communities on the panels were examined and analyzed. The results indicated that species composition of assemblages was obviously different between the two sites. At both sites the assemblages were characteristic with solitary dominant species throughout the year, with Amphibalanus reticulates dominating at H-site and Hydroides elegans at L-site. Shannon index and biomass of the assemblages varied with depth and season at both sites. At H-site the total biomass in summer and autumn were significantly higher than those in spring and winter, while at L-site the assemblage biomass also differed significantly among the four seasons, and the greatest biomass occurred at the depth of 2.0 m in winter. The abundance of all seasonal samples in non-metric multidimensional scaling was clustered as one group at L-site and three groups at H-site. The environmental factors were more likely to be related to the variation of fouling assemblages. Furthermore, it also suggests that in tropical seas the integrated adaptability would qualify a species for dominating a fouling assemblage despite its short life cycle, rather than the usually assumed only species with long life span. This study reveals the complexity and characteristic dynamics of macrofaunal fouling assemblages in the tropical habitats, and the results would provide valuable knowledge for biodiversity and antifouling research.     

APPLICATION OF GEOGRAPHICAL PARAMETER DATABASE TO ESTABLISHMENT OF UNIT POPULATION DATABASE

Now GIS is turning into a good tool in handling geographical, economical, and population data, so we can obtain more and more information from these data. On the other hand, in some cases, for a calamity, such as hurricane, earthquake, flood, drought etc., or a decision-making, such as setting up a broadcasting transmitter, building a chemical plant etc., we have to evaluate the total population in the region influenced by a calamity or a project. In this paper, a method is put forward to evaluate the population in such special region. Through exploring the correlation of geographical parameters and the distribution of people in the same region by means of quantitative analysis and qualitative analysis, unit population database (1km× 1km) is established. In this way, estimating the number of people in a special region is capable by adding up the population in every grid involved in this region boundary. The geographical parameters are obtained from topographic database and DEM database on the scale of     

CARBON DYNAMICS OF WETLAND IN THE SANJIANG PLAIN

1INTRODUCTIONWetlandsplayanimportant roleintheprocessofcar-bonstorage.Thetotalcarbonstoredindifferentkindsofwetlandsisabout15%-35%ofthetotalcarboninthegloballandsoils(POSTetal.,1982;GORHAM,1991).Inaddition,wetlandsaresignificantnaturalsources fortheatmospheric CH4 (MOORE,1994).It isestimatedthatabout110×1012gCH4 originates fromanaerobicdecompositioninthenaturalwetlands,CH4 emission fromthenaturalwetlandsis15%-30%oftheglobalCH4 emission andtheCH4 emission from thepeat land at hi…     

Soil contamination from urban and industrial activity: example of the mining district of Linares (southern Spain)

The Linares region (southern Spain) has been subjected to two important sources of pollution: the intensive mining works and the urban-industrial activity. To obtain a geochemical characterisation of the soil, 31 trace elements were analysed and 669 soil samples were collected. By means of clustering analysis, we identified groups of elements and grid squares in which relations could be established concerning soil lithology, urban and industrial activities and the degree of pollution impact; in addition, we were able to characterise the geochemical background of the study area. The multivariate study led us to identify four factors. Particularly important was factor 2, which represented the elements associated with mineral paragenesis (Cu, Pb, As, Co, Mn, Zn, Sn, Ba). This factor also contains elements related with an urban-industrial activity, such as Pb, Cu, Zn, As and Ba. Furthermore, we identified factor 4, associating Ni, V and Cr, and which is related to the use of fuels.     

The Mordor Alkaline Igneous Complex,Central Australia: PGE-enriched disseminated sulfide layers in cumulates from a lamprophyric magma

The Mordor Alkaline Igneous Complex (MAIC) is a composite intrusion comprising a body of syenite and a funnel-shaped layered mafic–ultramafic intrusion of lamprophyric parentage, the Mordor Mafic–Ultramafic Intrusion or MMUI. The MMUI is highly unusual among intrusions of lamprophyric or potassic parentage in containing primary magmatic platinum-group element (PGE)-enriched sulfides. The MMUI sequence consists largely of phlogopite-rich pyroxenitic cumulates, with an inward dipping conformable layer of olivine-bearing cumulates divisible into a number of cyclic units. Stratiform-disseminated sulfide accumulations are of two types: disseminated layers at the base of cyclic units, with relatively high PGE tenors; and patchy PGE-poor disseminations within magnetite-bearing upper parts of cyclic units. Sulfide-enriched layers at cycle bases contain anomalous platinum group element contents with grades up to 1.5 g/t Pt+Pd+Au over 1-m intervals, returning to background values of low parts per billion (ppb) on a meter scale. They correspond to reversals in normal fractionation trends and are interpreted as the result of new magma influxes into a continuously replenished magma chamber. Basal layers have decoupled Cu and PGE peaks reflecting increasing PGE tenors up-section, due to increasing R factors during the replenishment episode, or progressive mixing of between resident PGE-poor magma and more PGE-enriched replenishing magma. The presence of PGE enriched sulfides in cumulates from a lamprophyric magma implies that low-degree partial melts do not necessarily leave sulfides and PGEs in the mantle restite during partial melting. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.