A probability distribution for depth-limited extreme wave heights in a sea state

A model for the depth-limited distribution of the highest wave in a sea state is presented. The distribution for the extreme wave height is based on a probability density function (pdf) for depth-limited wave height distribution for individual waves [Méndez, F.J., Losada, I.J., Medina, R. 2004. Transformation model of wave height distribution. Coastal Eng, Vol. 50, 97:115.] and considers the correlation between consecutive waves. The model is validated using field data showing a good representation of the extreme wave heights in the surf zone. Some important statistical wave heights are parameterized obtaining useful expressions that can be used in further calculations.     

Longitudinal strength of a high-speed ferry

The longitudinal strength of the high-speed ferry was investigated by subjecting the ship's hull girder to long-term loads obtained from a frequency-domain panel code. Prior to the statistical analysis, linearly computed transfer functions were corrected for nonlinear effects, yielding two sets of transfer functions valid for different wave amplitudes. One set corresponded to the hogging condition; the other set, to the sagging condition. Two regular equivalent design waves were specified that resulted in loads representing the most severe global design load conditions. The still-water loading condition, yielding a still-water vertical bending moment in hogging, was superimposed on the wave-induced loads to obtain the total (design) loads in hogging. For the sagging condition only, additional impact-related loads were superimposed to obtain the total (design) loads in sagging. A finite element model of the ship's structure was subjected to pressure distributions according to the two regular design waves. For comparison with classification society rule values, a simple beam theory strength analysis of the ship's midship section was performed first, and then another finite element analysis was carried out, whereby the imposed loads were tuned to the rule values of vertical bending moments. Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25–39%) from comparable stresses obtained by the panel code based finite element analysis. However, stresses obtained from the rule-based finite element analysis agreed more favorably, especially in hogging. In the uppermost deck, for example, the panel code based compressive stress was only 9% larger than the comparable stress from the rule-based finite element analysis.     

Quaternary geology of the Amazonian Lowland

The Quaternary history of the Amazon lowlands is characterized by deposition of sediments of Andean provenance and by the influences of changing sea levels. Areas well above the present water tables were not reached by Pleistocene high-water stages. These areas have been intensively weathered since the Tertiary, forming hard lateritic weathering horizons. These weathering horizons are best explained by the relatively constant, humid tropical climate throughout the Quaternary. In the western Amazonian Lowland, flood plains corresponding to the different Pleistocene sea-level heights were formed. During low sea level, erosion in the drainage areas increased and the water levels of the central Amazon River system were lowered. Valleys drowned and lakes formed in the lower reaches of rivers and creeks during high sea-level stages. These lakes (ria lakes) remained in the valleys with rivers having a low sediment load. Seismic profiling (3.5 kHz) in some of these lakes clearly showed deposits of the three last periods of Quaternary high sea-level stages.     

黄鳍鲷LDH同工酶的组织特异性研究

以黄鳍鲷为材料进行两方面研究:（1）用聚丙烯酰胺凝胶电泳方法，对其肌肉，心脏，肝脏，血清，玻璃体，晶状体，脑等组织器官进行LDH同工酶分析比较，结果表明，不同组织中LDH的同工酶谱带不相同，存在着组织特异性：（2）用聚丙烯酰胺等电聚焦电泳法对其肌肉，血清的LDH同工酶进行分离 ，结果得到12－15条电泳区带，等电点范围在pH为3．65－9．58之间。     

The influence of island generated eddies on the carbon dioxide system, south of the Canary Islands

Measurements of surface partial pressure of CO₂ and water column alkalinity, pH_T, nutrients, oxygen, fluorescence and hydrography were carried out, south of the Canary Islands during September 1998. Cyclonic and anticyclonic eddies were alternatively observed from the northwestern area to the central area of the Canary Islands. Nutrient pumping and vertical uplifting of the deep chlorophyll maximum by cyclonic eddies were also ascertained by upward displacement of dissolved inorganic carbon. A model was applied to determine the net inorganic carbon balance in the cyclonic eddy. The fluxes were determined considering both the diffusive and convective contributions from the upward pumping and the corresponding horizontal transport of water outside the area. An increase in the total inorganic carbon concentration in the upper layers inside the eddy field of 133 mmol C m^− 2 d^− 1 was determined. The upward flux of inorganic carbon decreased the effect of the increased primary production on the carbon dioxide chemistry. The reduced fCO₂ inside the cyclonic eddy, 15 μatm lower than that observed in non-affected surface water, was explained by thermodynamic aspects, biological activity, eddy upward pumping and diffusion and air–sea water exchange effects.     

Equilibrium constants of triethanolamine in major seawater salts

Acid–base equilibrium constants of triethanolamine (TEA) have been determined by potentiometric titrations with a glass electrode, at 25 °C. Ionic strength was kept constant with only one electrolyte (using one of these salts: NaCl, KCl, MgCl₂ or CaCl₂), with binary mixtures of MgCl₂ and CaCl₂, and finally, in a solution with a composition approximately similar to that of natural seawater without sulfate. Equilibrium constants have been expressed in function of ionic strength by means of Pitzer equations and interaction parameters proposed in this theory have been obtained. It has been found that acid–base behaviour of TEA depends greatly on the salt used: basicity of TEA is decreased by CaCl₂, while it is increased by the other electrolytes used in this work.     

Characterisation and preliminary quantification of the methane reservoir in a coastal sedimentary source: San Simón Bay,Ría de Vigo,NW Spain

Ría de Vigo is a river valley flooded by the sea, with a bay (San Simón Bay) at its innermost part. The accumulation of Holocene sediment in San Simón Bay has been studied by the integration of 1) large scale high resolution seismic data, and 2) detailed geochemical analysis of a gravity core. In San Simón Bay the majority of the seismic records are obscured by acoustic turbidity which represents gassy sediments, but on records from Rande Strait it is possible to distinguish two Quaternary seismic sequences; an Upper Pleistocene sequence (SQ1) and a Holocene sequence (SQ2). Only SQ2 is recognized in San Simón Bay where it is comprised of two seismic units; the upper unit represents the HST sediment, i.e. the period of highest sea level. A gravity core taken within the gassy zone at 10 m water depth provided 3.55 m of fine-grained sediments (muds) from the youngest seismic unit (4 m thick). Geochemical analysis show high values (4 to 10%) of TOC. Sediment and porewater analyses indicate a distinct sulphate–methane transition zone (SMTZ) between 60 and 80 cm where sulphate is depleted (to <1.7 mM) and methane increases (to >0.4 mM). The top of the acoustic turbidity (the gas front) at 80 cm corresponds to the lower limit of the SMTZ. The methane cannot have been derived from the underlying metamorphic and granitic rocks, but was probably derived by microbial degradation of the organic matter in the Holocene sediments. We estimate that the sediments of the Bay contain approximately 1.8 × 10⁶ m³ of organic carbon and 275 ton of methane.     

Seismic characterization of switching platform geometries and dominant carbonate producers (Miocene,Las Negras,Spain)

The primary goals of seismic interpretation and quantification are to understand and define reservoir architecture and the distribution of petrophysical properties. Since seismic interpretation is associated with major uncertainties, outcrop analogues are used to support and improve the resulting conceptual models. In this study, the Miocene carbonates of Cerro de la Molata (Las Negras, south‐east Spain) have been selected as an outcrop analogue. The heterogeneous carbonate rocks of the Cerro de la Molata Platform were formed by a variety of carbonate‐producing factories, resulting in various platform morphologies and a wide range of physical properties. Based on textural (thin sections) and petrophysical (porosity, density, carbonate content and acoustic properties) analyses of the sediments, eleven individual facies types were determined. The data were used to produce synthetic seismic profiles of the outcrop. The profiles demonstrate that the spatial distribution of the facies and the linked petrophysical properties are of key importance in the appearance of the synthetic seismic sections. They reveal that carbonate factory and facies‐specific reflection patterns are determined by porosity contrasts, diagenetic modifications and the input of non‐carbonate sediment. The reflectors of the seismograms created with high‐frequency wavelets are coherent with the spatial distribution of the predefined facies within the depositional sequences. The synthetic seismograms resulting from convolution with lower frequency wavelets do not show these details – the major reflectors coincide with: (i) the boundary between the volcanic basement and the overlying carbonates; (ii) the platform geometries related to changes in carbonate factories, thus sequence boundaries; and (iii) diagenetic zones. Changes in seismic response related to diagenesis, switching carbonate producers and linked platform geometries are important findings that need to be considered when interpreting seismic data sets.