Static telescope aberration measurement using lucky imaging techniques

A procedure has been developed to compute static aberrations once the telescope PSF has been measured with the lucky imaging technique, using a nearby star close to the object of interest as the point source to probe the optical system. This PSF is iteratively turned into a phase map at the pupil using the Gerchberg?CSaxton algorithm and then converted to the appropriate actuation information for a deformable mirror having low actuator number but large stroke capability. The main advantage of this procedure is related with the capability of correcting static aberration at the specific pointing direction and without the need of a wavefront sensor.     

Geochemical Constraints on the Origin of the Ni–Cu Sulfide Ores in the Tejadillas Prospect (Cortegana Igneous Complex,SW Spain)

After the discovery of the Aguablanca ore deposit (the unique Ni–Cu mine operating in SW Europe), a number of mafic‐ultramafic intrusions bearing Ni–Cu magmatic sulfides have been found in the Ossa–Morena Zone of the Iberian Massif (SW Iberian Peninsula). The Tejadillas prospect is one of these intrusions, situated close to the border between the Ossa–Morena Zone and the South Portuguese Zone of the Iberian Massif. This prospect contains an average grade of 0.16 wt % Ni and 0.08 wt % Cu with peaks of 1.2 wt % Ni and 0.2 wt % Cu. It forms part of the Cortegana Igneous Complex, a group of small mafic‐ultramafic igneous bodies located 65 km west of the Aguablanca deposit. In spite of good initial results, exploration work has revealed that sulfide mineralization is much less abundant than in Aguablanca. A comparative study using whole‐rock geochemical data between Aguablanca and Tejadillas shows that the Tejadillas igneous rocks present a lower degree of crustal contamination than those of Aguablanca. The low crustal contamination of the Tejadillas magmas inhibited the assimilation of significant amounts of crustal sulfur to the silicate magmas, resulting in the sparse formation of sulfides. In addition, Tejadillas sulfides are strongly depleted in PGE, with total PGE contents ranging from 14 to 81 ppb, the sum of Pd and Pt, since Os, Ir, Ru and Rh are usually below or close to the detection limit (2 ppb). High Cu/Pd ratios (9700–146,000) and depleted mantle‐normalized PGE patterns suggest that the Tejadillas sulfides formed from PGE‐depleted silicate magmas. Modeling has led us to establish that these sulfides segregated under R‐factors between 1000 and 10,000 from a silicate melt that previously experienced 0.015% of sulfide extraction. All these results highlight the importance of contamination processes with S‐rich crustal rocks and multiple episodes of sulfide segregations in the genesis of high‐tenor Ni–Cu–PGE ore deposits in mafic‐ultramafic intrusions of the region.     

Fluid-driven low-grade metamorphism in polydeformed rocks of Avalonia (Arisaig Group, Nova Scotia, Canada)

The Lower Silurian??Lower Devonian Arisaig Group (Antigonish Highlands) in the Canadian Appalachians is a sequence of shallow marine strata deposited after the accretion of Avalonia to Baltica during the closure of the Iapetus Ocean. Deformation of the strata is widely attributed to the Devonian Acadian orogeny and produced shallowly plunging regional folds and a cleavage of varying penetrativity. Phyllosilicate minerals from the finest-grained rocks exhibit very low-grade (diagenetic-anchizone) metamorphic conditions. X-ray diffraction study reveals that the sampled rocks contain quartz, K-white mica, chlorite, and feldspars; illite?Csmectite and chlorite?Csmectite mixed-layers are common but Na?CK mica and kaolinite occur only in some samples. The identification of illite?Csmectite mixed-layers in diagenetic samples, with Kübler Index >0.50 ??°2?? and the highly heterogeneous b-cell dimension of the K-white micas are in agreement with the variable chemical composition of dioctahedral micas, which present low illitic substitution and variable phengitic content. The spatial variation in the above crystal-chemical parameters was plotted along a NW?CSE composite cross section across the regional folds. No correlation was found between the metamorphic conditions and either the stratigraphic depth or the strain values measured by phyllosilicates orientation analyses, as a function of the penetrativity of the cleavage. However, the metamorphic grade generally increases towards the Hollow Fault, and is highest in samples located within a 1?km corridor from the fault surface. Incipient cleavage is observed in the anchizonal samples located in the vicinity of the Hollow Fault and in some of the diagenetic samples, indicating cleavage development under low temperatures (<200?oC). These relationships, together with regional syntheses, suggest low-grade metamorphism post-dated regional folding and was coeval with Late Carboniferous dextral movement along the Hollow Fault. Fluid circulation associated with movement along this major fault may be the driving mechanism for the increasing metamorphism towards it.     

New thermoelastic parameters of natural <Emphasis Type="Italic">C</Emphasis>2/<Emphasis Type="Italic">c</Emphasis> omphacite

The compressibility at room temperature and the thermal expansion at room pressure of two disordered crystals (space group C2/c) obtained by annealing a natural omphacite sample (space group P2/n) of composition close to Jd₅₆Di₄₄ and Jd₅₅Di₄₅, respectively, have been studied by single-crystal X-ray diffraction. Using a Birch–Murnaghan equation of state truncated at the third order [BM3-EoS], we have obtained the following coefficients: V ₀ = 421.04(7) Å³, K _T0 = 119(2) GPa, K′ = 5.7(6). A parameterized form of the BM3 EoS was used to determine the axial moduli of a, b and c. The anisotropy scheme is β _c  ≤ β _a  ≤ β _b , with an anisotropy ratio 1.05:1.00:1.07. A fitting of the lattice variation as a function of temperature, allowing for linear dependency of the thermal expansion coefficient on the temperature, yielded α_V(1bar,303K) = 2.64(2) × 10⁻⁵ K⁻¹ and an axial thermal expansion anisotropy of α _b  ≫ α _a  > α _c . Comparison of our results with available data on compressibility and thermal expansion shows that while a reasonable ideal behaviour can be proposed for the compressibility of clinopyroxenes in the jadeite–diopside binary join [K _T0 as a function of Jd molar %: K _T0 = 106(1) GPa + 0.28(2) × Jd_(mol%)], the available data have not sufficient quality to extract the behaviour of thermal expansion for the same binary join in terms of composition.     

U–Pb geochronology of two discrete Ordovician high-pressure metamorphic events in the Seve Nappe Complex, Scandinavian Caledonides

U–Pb geochronology for eclogites in two different areas of the Seve Nappe Complex (SNC) in Sweden confirms previous indications of discrete Ordovician high-pressure events affecting various parts of the complex. In Norrbotten, just north of the Arctic circle, eclogites from the Ts?kkok and Vaimok Lenses yield identical metamorphic zircon ages of 482 ± 1 Ma. Titanite in a metagabbro from the Vaimok Lens retains an older age of 607 ± 2 Ma, which may date a protolith coeval with mafic dikes in the overlying Sarek Lens; high-U zircon cores in one of the eclogites also indicate a similar age. Farther south, in J?mtland, the Tjeliken eclogite yields a significantly younger metamorphic age of 446 ± 1 Ma. Although they support the age discrepancy between the Norrbotten and J?mtland eclogites, the U–Pb ages of both eclogite suites are ca. 20 m.y. younger than previously reported Sm–Nd ages. The latter may either represent early prograde growth or be spuriously too old due to isotopic disequilibrium. The SNC has traditionally been taken to represent the outermost margin of Baltica, linking the Early Caledonian eclogite–forming events to subduction of Baltica below an offshore arc. Alternatively, the coincidence of these eclogite-forming events with orogenic phases recorded on the Laurentian margin may point to an origin from other regions of the Iapetus Ocean.     

The boron isotope geochemistry of tourmaline-rich alteration in the IOCG systems of northern Chile: implications for a magmatic-hydrothermal origin

Hydrothermal tourmaline is common in the iron oxide-copper-gold (IOCG) deposits of the Coastal Cordillera of Chile where it occurs as large crystals in the groundmass of magmatic-hydrothermal breccias, such as in the Silvita or Tropezón ore bodies, or as small grains in replacive bodies or breccia cement in the ore-bearing andesite, as seen at the Candelaria or Carola deposits. Tourmaline shows strong chemical zoning and has a composition of schorl–dravite with significant povondraite and uvite components. The observed boron isotope composition is fairly variable, between −10.4‰ and +6.0‰ with no major differences among the different deposits, suggesting a common genetic mechanism. The δ¹¹B values are significantly lower than those of seawater or marine evaporites and very similar to those of younger porphyry copper deposits and volcanic rocks in the region, indicating that the boron has a common, likely magmatic, origin. The predominant boron source was ultimately dewatering of the subducting slab with a significant contribution derived from the overlying continental basement. The range of δ¹¹B values is between those of the porphyry copper deposits and the porphyry tin deposits of the Andes, suggesting that the IOCG mineralization might be genetically related to fluids having more crustal contamination than the porphyry copper deposits; such an interpretation is at odds with current models that propose that the Andean IOCG deposits are related to juvenile melts or to the circulation of basinal brines. Furthermore, the obtained δ¹¹B data are markedly different from those of the tourmaline in the Carajás IOCG district (Brazil), suggesting that IOCGs do not form by a unique mechanism involving only one type of fluids.     

Granite emplacement by crustal boudinage: example of the Calmayo and El Hongo plutons (Córdoba,Argentina)

This study deals with the structure and emplacement of the Calmayo and El Hongo trondhjemite plutons (Famatinian belt of Córdoba, Argentina). It provides structural data from the granites and the country rocks and a study of the magnetic fabric in the plutons. New U/Pb geochronological data yield intrusion ages of 512.1 ± 3.4 Ma and 500.6 ± 4.5 Ma for the Calmayo and El Hongo plutons respectively. The El Hongo massif and the southern part of the Calmayo trondhjemite preserve magmatic structures, whereas the northern domain of Calmayo shows the imprint of solid‐state deformation. The main foliation in the country rocks outlines a boudin‐like pattern at the map scale and the granites are located along boudin necks, suggesting that the emplacement of these trondhjemite plutons was linked to large‐scale boudinage of the country rocks.     

Shallow water tidal currents in close proximity to the seafloor and boundary-induced turbulence

Velocity measurements with vertical resolution 0.02 m were conducted in the lowest 0.5 m of the water column using acoustic Doppler current profiler (ADCP) at a test site in the western part of the East China Sea. The friction velocity u _* and the turbulent kinetic energy dissipation rate ε _wl(ζ) profiles were calculated using log-layer fits; ζ is the height above the bottom. During a semidiurnal tidal cycle, u _* was found to vary in the range (1–7) × 10⁻³ m/s. The law-of-the-wall dissipation profiles ε _wl(ζ) were consistent with the dissipation profiles ε _mc(ζ) evaluated using independent microstructure measurements of small-scale shear, except in the presence of westward currents. It was hypothesized that an isolated bathymetric rise (25 m height at a 50-m seafloor) located to the east of the measurement site is responsible for the latter. Calculation of the depth integrated internal tide generating body force in the region showed that the flanks of the rise are hotspots of internal wave energy that may locally produce a significant turbulent zone while emitting tidal and shorter nonlinear internal waves. This distant topographic source of turbulence may enhance the microstructure-based dissipation levels ε _mc(ζ) in the bottom boundary layer (BBL) beyond the dissipation ε _wl(ζ) associated with purely locally generated turbulence by skin currents. Semi-empirical estimates for dissipation at a distance from the bathymetric rise agree well with the BBL values of ε _mc measured 15 km upslope.     

Resolution of GPR bowtie antennas: An experimental approach

Since target reflections directly depend on the emitted pulse characteristics, a key factor for carrying out a successful GPR survey is to know as much as possible about the transmission features of the antennas used. This information is very important in order to choose the right antennas and set the appropriate configuration parameters for a specific survey. With this in mind this paper deals with the development of a set of laboratory experiments on the resolution capabilities of three bowtie antennas at frequencies of 500, 800 and 1000 MHz. Results from these measurements give a first estimation of the resolution of the antennas under test, showing the advantage of performing experiments rather than relying only on theoretical assumptions. The results are also expressed in terms of the central wavelength for each antenna and compared with some theoretical estimations proposed in the specialized bibliography.