初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

高精度GPS形变监测网数据处理的理论与方法

分析了高精度GPS形变监测网数据处理中系统误差的影响,给出了顾及系统误差影响的自由网平差模型;针对粗差在GPS观测数据中存在的广泛性,在对平差模型进行整体性检验的基础上,采用检验方法消除粗差对平差结果的影响;结合抗差估计,对中国地壳运动观测网络工程1999～2003年观测数据进行了处理,验证了模型的精度和可靠性.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

饱和软土压缩曲线的“反常”现象

饱和软土压缩试验时,经常出现压缩曲线“反常”、压缩系数“倒大”的现象。它是土的原始结构发生破坏前后的不同压缩性的客观反映。饱和软土的结构力很微弱,唯质量好的原状土才能见到这种“反常”。应从成孔、取样、测试及资料整理等多个环节保证其工程意义。     

An electrochemical study of pyrite oxidation in the presence of carbon coatings in cyanide medium

The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness.     

土钉墙与预应力锚杆联合支护技术

北京市深基坑工程中土钉墙支护技术应用比较广泛，对于边坡变形要求严格的基坑，采用土钉墙与预应力锚杆联合支护技术可有效控制变形，结合工程实例，介绍了该技术的设计思路及应用过程，说明了该技术的适用性，并就施工中遇到的问题进行分析，给出相应的处理措施。     

论琅岐岛经济发展定位与开发建设

随着福州东扩南移的城市发展策略的推行,琅岐岛凭借独特的资源优势,经济地理位置日显重要,对其开发建设已成为大势所趋。本文在分析了琅岐岛区域经济发展的资源条件基础上,指出琅岐经济发展的合理定位,提出区域经济发展的若干对策,为琅岐经济持续、健康、稳定地发展提供意见。     

政府办公自动化系统建设和应用浅谈

本文简要地介绍了办公自动化的发展过程,分析了其常用的功能、特点,以及内容分类,论述了目前办公自动化系统的技术支撑和实现,并指出政府办公自动化系统在开发和应用中存在的问题和解决思路。对系统的推广使用具有一定的参考意义。     

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。     

单一滑面边坡的非稳定蠕变模型分析

对单一滑面边坡的非稳定蠕变分析是边坡稳定性研究的基础。文中对岩质边坡单一滑面的流变变形机制进行了分析，提出了一种能较好反映这一变形机制的非稳定蠕变模型。特别是描述单一滑面边坡的非稳定蠕变破坏阶段，并对其稳定性进行了讨论。结合一些工程实例进行了对比验证，为滑坡灾害的预测和防治提供依据。