结合投影变换和相位相关的海冰运动监测

为提高对渤海海冰旋转和平移运动的监测精度,提出一种基于投影变换的相位相关跟踪方法。选取连续8景静止水色成像仪(GOCI)图像序列,根据特征图像窗口的投影变换构造辅助函数,通过寻求函数最优解得到旋转角度集合,选择修正相关系数确定最佳旋转角度,同时根据相位信息实现海冰样本间亚像素级别的平移跟踪,消除传统相位相关法中因忽略图像相频特性所造成的匹配误差。实验结果表明,以手动测量的旋转角度为基准,该方法和传统相位相关法的旋转监测均方根误差的最大值/平均值分别为0.59/0.50与1.41/0.94,跟踪速度提高了50.6%;海冰平移运动的速度矢量与辽东湾的现场实测数据及历史资料记录数据基本一致。该方法对渤海海冰旋转和平移运动具有较好的跟踪效果。     

Generating GPS satellite fractional cycle bias for ambiguity-fixed precise point positioning

With the development of precise point positioning (PPP), the School of Geodesy and Geomatics (SGG) at Wuhan University is now routinely producing GPS satellite fractional cycle bias (FCB) products with open access for worldwide PPP users to conduct ambiguity-fixed PPP solution. We provide a brief theoretical background of PPP and present the strategies and models to compute the FCB products. The practical realization of the two-step (wide-lane and narrow-lane) FCB estimation scheme is described in detail. With GPS measurements taken in various situations, i.e., static, dynamic, and on low earth orbit (LEO) satellites, the quality of FCB estimation and the effectiveness of PPP ambiguity resolution (AR) are evaluated. The comparison with CNES FCBs indicated that our FCBs had a good consistency with the CNES ones. For wide-lane FCB, almost all the differences of the two products were within ±0.05 cycles. For narrow-lane FCB, 87.8 % of the differences were located between ±0.05 cycles, and 97.4 % of them were located between ±0.075 cycles. The experimental results showed that, compared with conventional ambiguity-float PPP, the averaged position RMS of static PPP can be improved from (3.6, 1.4, 3.6) to (2.0, 1.0, 2.7) centimeters for ambiguity-fixed PPP. The average accuracy improvement in the east, north, and up components reached 44.4, 28.6, and 25.0 %, respectively. A kinematic, ambiguity-fixed PPP test with observation of 80 min achieved a position accuracy of better than 5 cm at the one-sigma level in all three coordinate components. Compared with the results of ambiguity-float, kinematic PPP, the positioning biases of ambiguity-fixed PPP were improved by about 78.2, 20.8, and 65.1 % in east, north, and up. The RMS of LEO PPP test was improved by about 23.0, 37.0, and 43.0 % for GRACE-A and GRACE-B in radial, tangential, and normal directions when AR was applied to the same data set. These results demonstrated that the SGG FCB products can be produced with high quality for users anywhere around the world to carry out ambiguity-fixed PPP solutions.     

变形监测技术在库岸防治工程中的应用

针对库岸稳定性检测的需求,该文将现代变形监测技术应用于乌江彭水县水电站鹿角镇库岸防治工程,对地表进行抗滑桩顶和岸坡表层水平位移和垂直位移监测,地下进行岸坡深层水平位移监测。文章对边坡变形监测进行分析,主要包括岸坡表层变形情况、岸坡深层位移情况、重要建筑物基础不均匀沉降情况及抗滑桩顶变形初步分析。对库安防治工程进行预警分析,可保证彭水县水电站的安全。     

Grid pattern recognition in road networks using the C4.5 algorithm

Pattern recognition in road networks can be used for different applications, including spatiotemporal data mining, automated map generalization, data matching of different levels of detail, and other important research topics. Grid patterns are a common pattern type. This paper proposes and implements a method for grid pattern recognition based on the idea of mesh classification through a supervised learning process. To train the classifier, training datasets are selected from worldwide city samples with different cultural, historical, and geographical environments. Meshes are subsequently labeled as composing or noncomposing grids by participants in an experiment, and the mesh measures are defined while accounting for the mesh’s individual characteristics and spatial context. The classifier is generated using the C4.5 algorithm. The accuracy of the classifier is evaluated using Kappa statistics and the overall rate of correctness. The average Kappa value is approximately 0.74, which corresponds to a total accuracy of 87.5%. Additionally, the rationality of the classifier is evaluated in an interpretation step. Two other existing grid pattern recognition methods were also tested on the datasets, and comparison results indicate that our approach is effective in identifying grid patterns in road networks.     

Curve matching approaches to waveform classification: a case study using ICESat data

Light Detection and Ranging (LiDAR) waveforms are being increasingly used in many forest and urban applications, especially for ground feature classification. However, most studies relied on either discretizing waveforms to multiple returns or extracting shape metrics from waveforms. The direct use of the full waveform, which contains the most comprehensive and accurate information has been scarcely explored. We proposed to utilize the complete waveform to test its ability to differentiate between objects having distinct vertical structures using curve matching approaches. Two groups of curve matching approaches were developed by extending methods originally designed for pixel-based hyperspectral image classification and object-based high spatial image classification. The first group is based on measuring the curve similarity between an unknown waveform and a reference waveform, including curve root sum squared differential area (CRSSDA), curve angle mapper (CAM), and Kullback–Leibler (KL) divergence. The second group assesses the curve similarity between an unknown and reference cumulative distribution functions (CDFs) of their waveforms, including cumulative curve root sum squared differential area (CCRSSDA), cumulative curve angle mapper (CCAM), and Kolmogorov–Smirnov (KS) distance. When employed to classify open space, trees, and buildings using ICESat waveform data, KL provided the highest average classification accuracy (87%), closely followed by CCRSSDA and CCAM, and they all significantly outperformed KS, CRSSDA, and CAM based on 15 randomized sample sets.     

姚家岭锌金多金属矿床围岩蚀变三维空间定量分析研究

姚家岭锌金多金属矿床是近年来在长江中下游成矿带铜陵矿集区新发现的大型多金属矿床。姚家岭锌金多金属矿床的成矿作用具有多阶段性的特点,矿床范围内围岩蚀变强烈,蚀变类型复杂多样。三维地质信息技术及三维空间分析方法为定量化分析围岩蚀变的空间分布以及与矿化之间的相关关系提供了有利工具。本文基于上述方法,有效地对姚家岭锌金多金属矿床的围岩蚀变的分带性及其与不同矿化之间的关联性行了定量分析。较之于传统研究方法,不仅能快速地对蚀变与矿化的分布特征进行分析,还能从定量的角度获取不同信息之间的规律性和相关性。本文采用的相关方法不但有助于更准确的判定蚀变分带及规律,还可为矿床的成矿模式及找矿模型的建立提供定量化的数据支持。