2015年四川乐山金口河M5.0地震孕震构造条件分析

2015年1月14日乐山金口河M5.0地震发生在历史地震强度较低的川南山区与四川盆地交界一带。基于四川区域地震台网的震相报告与波形资料,采用双差定位法对地震序列进行重新定位,同时,采用CAP波形反演方法及HASH方法反演了主震及序列中8次M_L≥2.0地震的震源机制解。另外,利用Coulomb3计算了主震发生后库仑应力改变量,得到的结果如下：①重新定位结果显示,金口河M5.0地震位于（103.18°E,29.32°N）,震源深度16.6km,略深于波形反演结果（12km）。序列分布在NNW向天全-荥经断裂和NE向西河-美姑断裂的交汇部位,余震序列在空间上呈NE向展布。②M5.0主震的机制解为节面Ⅰ：走向350°/倾角46°/滑动角107°,节面Ⅱ：走向146°/倾角47°/滑动角73°,表现为走向NW（NNW）、中等倾角的逆冲型运动方式。序列中其余8次M_L≥2.0余震大多以走向NE的逆冲型地震为主,个别为走滑或正断层类型。主震和大部分余震的节面方向不一致,主震节面方向与余震长轴方向也不一致。③主震后库仑应力改变量显示,余震主要发生在主震引起的库仑破裂应力增加的区域。综合分析推测,NNW向天全-荥经断裂为本次地震主震的发震构造,倾向NE的机制解节面Ⅰ指出了该断裂的几何产状;M5.0主震发生后,立即触发了其旁侧的NE向西河-美姑断裂,并激发了多次余震。     

利用卫星重力数据研究中国及邻域地壳厚度

本文以中国大陆及邻域地壳厚度为研究对象,采用GRACE提供的GX-OG-2-GCM模型数据计算自由空气重力异常,通过确定地核与地幔的质量,分离出由地壳部分产生的重力异常并经过布格改正得到布格重力异常,利用Park公式求出了中国大陆地壳厚度的分布,结果与以前地壳厚度资料相符合.     

岩爆破坏过程能量释放的数值模拟

岩爆是地下岩石开挖中的一种工程灾害现象,是岩体结构发生破坏时,由于内部储存的弹性能释放并转换为动能而造成动力形式的破坏。岩爆破坏过程中的能量释放与岩体在应力峰值前后的应力-应变特性紧密相关。另外,施工中开挖速度引起的加载速率的变化也会对岩爆的产生有明显影响。以岩体全过程应力-应变曲线试验为基础分析岩爆破坏过程。分析中采用的模型考虑了岩石峰值后应力-应变特性及加载速率的影响。运用数值方法对岩石洞室的开挖过程进行了模拟,在模拟中对岩体破坏的发生及弹性能释放过程进行了分析。数值分析结果显示,岩体洞室开挖过程中岩石破坏由岩体表面向岩体内部发展,岩石的弹性能释放率也随着破坏的发展而不断增加。分析结果还显示,岩体破坏时的弹性能释放速率会随着开挖速率的提高而明显增加。     

一次冰雹过程人工催化的数值模拟试验

利用二维雹云模拟济南地区１９９６年７月２４日出现的一次冰雹过程，模拟结果表明对雹云２６个主要微物理过程双参数化较细致地描述对流过程的热，动力反馈和微物理特点２。根据计算结果，对该次冰雹过程进行了ＡｇＩ催化试验，结果得出在云发展初期对暖底雹云实施高浓度的冰晶催化，可起到减少地面冰雹和增加地面降水的作用。     

Thermal conductivity measurements of road construction materials in frozen and unfrozen state

A series of thermal conductivity measurements for various materials was performed in a large climate chamber. The size of the chamber allowed the preparation of relatively large samples in a controlled thermal environment. Three types of thermal sensors were used: (1) two needle probes; (2) a grid of temperature sensors, evenly distributed inside the sample; (3) two additional thermal probes, which were simplified versions of an instrument originally developed for measuring thermal properties of the ice/dust mixture expected to exist at the surface of a comet nucleus. They consist of a series of individual temperature sensors integrated into a glass fibre rod. Each of these sensors can be operated in an active (heated) or passive (only temperature sensing) mode. The following sample materials were used: fine-grained reddish sand, coarse-grained moist sand, gravels with various grain size distributions from < 1 cm up to about 6 cm, and for comparison and calibration pure water (with convection suppressed by adding agar-agar), compact ice, and compact granite. Of particular interest are the measurements with composite samples, like stones embedded in an agar-agar matrix. We describe the evaluation methods and present the results of the thermal conductivity measurements.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

地质勘探套管钻进技术研究

针对复杂地层钻探,基于绳索取心钻进原理,采用不提钻换钻头取心钻进方法,开展地质勘探套管钻进新方法研究,包括套管取心钻具、代替绳索取心钻杆使用的套管,护壁措施、套管钻进工艺等,野外生产试验取得了较好的技术经济效果,并根据存在问题提出了进一步完善的建议。     

五大连池水质现状及近30年前后变化

2012—2013年春、夏、秋季,对五大连池11个采样点的水质变化进行研究,分析湖水水质现状,比较30年前后湖泊的水质变化并评估五大连池富营养化程度.结果表明,五大连池不同部分、季节、年份的水质参数指标波动剧烈,可能是受水产养殖及氮、磷浓度变化影响,2池和3池浮游生物量及叶绿素a浓度明显较低;同1980s相比,水质变化较大,一些指标显示水质已趋向好转,但5池却接近重度富营养化,说明近几年的还湿、迁居等保护措施初见效果,但整个湖泊水质恢复需要漫长过程.     

Mechanical behavior and micro-structure of cement kiln dust-stabilized expensive soil

In this study, the effects of cement kiln dust (CKD) on the swelling properties, strength properties, and microstructures of CKD-stabilized expansive soil were investigated. Samples were prepared and stabilized with different CKD content ratios, ranging from 0 to 18% by dry mass. The results obtained show that the maximum swelling pressures decrease exponentially with increases in CKD content. Both the cohesion and unconfined compressive strength (UCS) increase at ratios below 10% CKD and then decrease slightly, above that ratio. CKD can also improve the strength of saturated, expansive soil. There is no visible change of UCS for soil without CKD when cured, while the UCS of a sample with 10% CKD content after curing for 90 days is higher than that after curing for only 1 day. This indicates that CKD can improve the long-term strength of expansive soil. Finally, microstructure analysis reveals that the addition of CKD reduces the montmorillonite content of expansive soil and decreases its swelling properties. The addition of CKD also changes the pore volume distribution, both the size and amount of macro-pores and micro-pores decrease with increase in CKD content. For saturated samples, the size of macro-pores is obviously reduced, while that of micro-pores is slightly increased for both treated and untreated soils. Hydration and saturation processes make the soil structure become dispersive which results in a lower strength, and adding CKD can restrain this process. The suggested optimal CKD content is between 10 and 14% and with a curing time of more than 27 days.     

双液静压注浆在丰沙线35号桥卵漂石地层的应用

在丰沙线35号桥加固工程的4、5号墩钻孔灌注桩施工中,采用回转滚刀钻进卵漂石地层,为确保孔壁稳定,对桩孔壁进行了双液注浆.在注浆孔成孔、压浆管安放、孔口架桥封堵及双液压浆过程中遇到了较多棘手问题,经施工现场多次试验和改进,解决了双液浓度及注入配比、架桥封堵孔口、双液分离注浆、窜浆处理和合理压浆量控制等技术难题,并取得了理想的注浆效果,确保了钻孔灌注桩顺利进行.