MedFlux: Investigations of particle flux in the Twilight Zone

The MedFlux project was devised to determine and model relationships between organic matter and mineral ballasts of sinking particulate matter in the ocean. Specifically we investigated the ballast ratio hypothesis, tested various commonly used sampling and modeling techniques, and developed new technologies that would allow better characterization of particle biogeochemistry. Here we describe the rationale for the project, the biogeochemical provenance of the DYFAMED site, the international support structure, and highlights from the papers published here. Additional MedFlux papers can be accessed at the MedFlux web site (http://msrc.sunysb.edu/MedFlux/).     

An overview of the Gulf of Batabanó (Cuba): Environmental features as revealed by surface sediment characterisation

The main environmental features of the Gulf of Batabanó, Cuba, Caribbean, were investigated through the analyses of surface sediments collected at 23 sites. In order to highlight the potential threats affecting the sedimentary compartment of this area, samples were analysed for: granulometry, mineralogy, heavy metals concentration (As, Cd, Cu, Mn, Ni, Pb, Zn), organic carbon, total nitrogen and radionuclides. Findings were compared with published data and “grey” literature.Results showed: granulometric homogeneity and a widespread carbonatic condition all over the gulf, probably due to stable bathymetry and lack of terrigenous input (except for the La Coloma basin); a rather pristine environment for what concerns heavy metals pollution, except for La Coloma where a large arsenic input was recorded; very low levels of natural and artificial radioactivity; a relevant quantity of sedimentary organic matter, providing biota with useful substrate for feeding and enhancing the food-web development while indirectly supplying lobster fisheries. Combined data highlighted the impact of the Dique Sur in reducing terrigenous input in the coastal area.Future studies should focus on dating of sediment cores for identifying and quantifying the changes acting in the gulf and on investigating the origins of the large arsenic input to La Coloma.     

Physicochemical properties of fine aerosols at Plan d'Aups during ESCOMPTE

The physical and chemical properties of aerosol particles were investigated at Plan d'Aups, one of the ESCOMPTE sites located in the St. Baume mountain area (700 m a.s.l.), 50 km east of Marseilles (France). The site is ideally located for assessing the vertical and horizontal extent of the pollution plume from the Marseilles–Berre area.Our study showed that polluted air masses from the Marseilles–Berre area are advected to Plan d'Aups in the early afternoon. Average daily concentration of particles reaches up to 40 μg m⁻³ while 1-h average particle number concentration is greater than 30,000 cm⁻³. Most of the particle mass is composed of SO₄²⁻ and organic carbon (OC). The chemical properties of the particles revealed that an additional source, possibly from the industrial area of Gardanne, contributes to the aerosol mass. This last source is characterised by significant emissions of elements, such as Zn, V, Al and Si.In addition to transport, we found that gas-to-particle conversion takes place at the interface between the free troposphere and the boundary layer. We estimated that on average, 30% of the particle number is accounted for by direct nucleation. This is potentially a major aerosol source to the free troposphere.     

Coastal processes and environmental hazards: the Buenos Aires (Argentina) and Venetian (Italy) littorals

The Buenos Aires (Argentina) and Venice (Italy) coastlands have experienced significant saltwater contamination of the phreatic aquifer, coastal erosion, hydrodynamic changes and relative sea level rise processes due to natural and man-induced factors. These factors expose coastal areas to morpho-hydro-geological hazards, such as soil desertification, frequency and degree of flooding, littoral erosion, and the silting of river mouths and channels. Man-made interventions and actions, such as beach mining, construction of coastal structures and exploitation of aquifers without an adequate knowledge of the hydrology setting and an adequate management program, worsen these natural hazards. Uncontrolled human activity induces environmental damage to the overall coastal plains. The coastal plains play an important role in the social/economic development of the two regions based on land use, such as agriculture, horticulture, breeding, and tourism, as well as industry. Results of investigations on saltwater contamination, sea level rise and morphological changes recently performed in these two coastal areas are presented here.     

Morphologic variability of exposed mass-transport deposits on the eastern slope of Gela Basin (Sicily channel)

The NE portion of Gela Basin in the Sicily Channel is affected by multiple slope failures originated during the late‐Quaternary. Basin sequences show evidence of stacked acoustically transparent and/or chaotic units, characterized by irregular upper surfaces, interpreted as mass‐transport deposits. The seafloor morphology also shows evidence of both old, partially buried, as well as recent slide products. Two recent slides exposed at seafloor, only 6 km apart (Twin Slides), are similar in geomorphological parameters, age and multistage evolution. Multistage failure of Twin Slides evolved from mud flows, derived from the extensive failure of less consolidated post‐glacial units, to localized slides (second stage of failure) affecting older and more consolidated materials. Although Twin Slides are very close to each other and have similar runout and fall height, they produced very dissimilar organization of the displaced masses, likely reflecting the distinct source units affected by failures. Integrating geophysical, sedimentological, structural and palaeontological data, a detailed investigation was conducted to determine the size and internal geometry of this mass‐transport complex, to explain the differentiated product and to shed light on its predisposing factors, triggers and timing.     

A 3‐D study of mineral inclusions in chromite from ordinary chondrites using synchrotron radiation X‐ray tomographic microscopy—Method and applications

Abstract– A method is described for imaging in 3‐D the interiors of meteoritic chromite grains and their inclusions using synchrotron radiation X‐ray tomographic microscopy. In ordinary chondrites, chromite is the only common mineral that survives long‐term weathering on Earth. Information about the silicate matrix of the original meteorite, however, can be derived from mineral inclusions preserved in the protecting chromite. The inclusions are crucial in the classification of fossil meteorites as well as sediment‐dispersed chromite grains from decomposed meteorites and larger impacts, as these are used for characterizing the past influx of material to Earth, but have previously been difficult to locate. The method is non‐destructive and time efficient for locating inclusions. The method allowed quantitative and morphological studies of both host chromite grains and inclusions in three dimensions. The study of 385 chromite grains from eight chondrites (H4–6, L4–6, LL4, LL6) reveals that inclusions are abundant and equally common in all samples. Almost two‐thirds of all chromite grains contain inclusions, regardless of group and type. The study also shows that the size of the inclusions and the host chromite grains, as well as the number of inclusions, within the host chromite grains vary with petrographic type. Thus, the petrographic type of the host of a suite of chromite grains can be determined based solely on inclusion content. The study also revealed that the amount of fractures in the host chromite can be correlated to previously assigned shock stages for the various chondrites. The study has thus shown that the features and inclusions of fossil chromite grains can give similar information about a former host meteorite as do studies of an unweathered whole meteorite, meaning that this technique is essential in the studies of ancient meteorite flux to Earth.     

Analysis of the evolution of road tunnels equilibrium conditions with a convergence–confinement approach

Since both lining structure and rock mass exhibit delayed behaviour, tunnel equilibrium conditions evolve with time. After discussing existing work done on different aspects of long-term tunnel behaviour, the aim of this paper is to “understand” the influence of rock mass and lining degradations on the long-term stability conditions of the tunnel by means of the convergence–confinement method. In order to represent the effects of degradation on tunnel long-term conditions, specific degradation models are selected according to the disorders identified during principal inspections of road tunnels in Switzerland. By simulating the reduction of the mechanical properties of both the rock mass and the lining or by using creep models, it is possible to assess the influence of the main degradation processes on tunnel stability. The results are interpreted in terms of tunnel safety factor. The presented approach for the determination of the long-term behaviour of tunnels, although valid for simple tunnel geometry and field stress conditions, allows to roughly estimate the influence of significant degradation processes that affect the rock mass and the supporting structure. Though this approach results in some simplification, it may be generalised and adopted with more refined numerical analyses for improving the assessment of tunnel long-term conditions.     

Spatial modelling and uncertainty assessment of pyroclastic cover thickness in the Sorrento Peninsula

Assessing spatial variability of soil thickness is a critical issue for understanding and predicting slope processes. The present work was aimed at estimating the spatial scales at which the variation of pyroclastic cover thickness occurs in a sample area in the Sorrento Peninsula (Italy). Stochastic simulation was used to understand the spatial variability of pyroclastic cover thickness on Mount Pendolo and to assess its spatial uncertainty. In the study area, covering about 0.7 km², thickness measurements were collected using electrical resistivity tomography profiles, continuous core drillings and steel rod penetrometric tests. Variographic analysis revealed the occurrence of an anisotropic behaviour along the N50 and N140 directions. In the latter anisotropic direction, a nested variogram was fitted including (1) a long-range component which could be related to large-scale factors, like the curvature of the slope and contributing area and (2) a shorter scale variation which is probably associated with the occurrence of denudation processes or to the articulate cover/bedrock interface. To assess the spatial variability and uncertainty of pyroclastic cover thickness, a stochastic simulation algorithm was used and 500 equally probable images of cover thickness were yielded. The results showed that a better thickness distribution map can be drawn by simulating the data collected on the slope and at the footslope separately. The approach also allowed delineating the areas characterized by greater uncertainty, suggesting supplementary measurements to further improve the cover thickness distribution model, thus reducing the uncertainty.     

Petrology of Al- and Cr-rich ophiolitic chromitites from the Muğla,SW Turkey: implications from composition of chromite,solid inclusions of platinum-group mineral,silicate, and base-metal mineral,and Os-isotope geochemistry

Ultramafic rocks around the city of Muğla in SW Turkey are represented by mantle peridotites depleted to various degrees, ranging from cpx-rich harzburgites to depleted harzburgite and dunite. Cpx-rich harzburgites are thought to be the residua left after extraction of MORB-type basalt, from which high-Al chromitite [49.2 < Cr# = 100 × Cr/(Cr + Al) < 53.5] crystallised with a higher proportion of ¹⁸⁷Os/¹⁸⁸Os (average of 0.1361). However, depleted harzburgites are assumed to be the residua left after extraction of hydrous boninitic melt produced by second stage partial melting of already depleted mantle due to a subducting slab, from which high-Cr chromitites (64.2 < Cr# < 85.9) with lower and heterogeneous ¹⁸⁷Os/¹⁸⁸Os ratio (average of 0.1324) were crystallised as a result of melt–rock interaction in a supra-subduction environment. Dunites around the chromite deposits are considered to be the product of melt–peridotite interaction. Most of the chromitites contain high-Cr chromite and display enrichment in IPGE (Os, Ir, Ru) over PPGE (Rh, Pt, Pd), with PGE concentrations between 61 and 1,305 ppb. Consistently, laurite-erlichmanite series minerals with various Os concentrations are found to be the most abundant PGM inclusions in chromite. Os–Ir–Ru alloy, irarsite, and kashinite, as well as Pt–Fe alloy and Pt-oxide, which are not common in ophiolitic chromitites, were also detected as magmatic PGM inclusions. Pentlandite, millerite, and, rarely heazlewoodite form the magmatic inclusions of base-metal sulphide. The presence of olivine and clinopyroxene, as well as hydrous silicate inclusions such as amphibole and phlogopite, in high-Cr chromitite supports the idea that high-Cr chromitites were formed in a supra-subduction environment.