On the control of an infinite capacity storage system

We consider an infinite-capacity storage system. The cumulative input to the system is assumed to be either (a) a non-decreasing Lévy process or (b) an integrated continuous-time Markov chain. Reward accumulates at a rate depending on the instantaneous release rate. The objective is to choose the release rule in such a way as to maximize the expected total discounted return. In this note we show how to determine the expected discounted return when the release rate is either constant or a linear function of the content.     

A preliminary report on the frequency characteristics of near-surface layers in the vicinity of the high dam lake

The frequency characteristics of near-surface sediments obtained from small scale S-wave refraction measurements conducted at two sites in the Garf Hussein area, contiguous to the High Dam Lake, South of Aswan, have shown drastic changes in the frequency-selective amplification of horizontal ground motion within a relatively short surface distance. This effect is attributed mainly to such factors as the variation in layer thickness and the presence or absence of soft alluvial deposits.These results indicate that movements initiated deep in the earth's crust may not be faithfully reflected on the ground surface. As geodetic work principally involves monitoring relative horizontal and vertical displacements on the earth's surface with time, geodesists are advised to take the spectral response of the ground into consideration.     

Gravity Data from the Teboursouk Area (“Diapirs Zone”, Northern Tunisia): Characterization of Deep Structures and Updated Tectonic Pattern

Located between eastern segments of the Atlas and Tell-Rif oro-genic belts, the “Dome zone” of northern Tunisia is characterized by the juxtaposition of various structures that mainly controlled the long geody-namic history of this part of the south-Tethyan Margin. To better understand the organization and deep extension of these structures, gravity data from the Teboursouk key area are proposed. These data include the plotting of Bouguer anomaly map and related parameters such as vertical and horizontal gradients, upward continuation and Euler solution. Compared to geological and structural maps available, they allow the identification of new deep structures and greater precision regarding the characteristics and organization of known ones; consequently, an updated structural pattern is proposed.     

Hydrogeochemical study of the Terme and Karakurt thermal and mineralized waters from Kirşehir Area,central Turkey

The Terme and Karakurt thermal resorts are located in the center of Kirşehir city in central Anatolia. Thermal waters with temperatures of 44–60°C are used for central heating and balneologic purposes. Paleozoic rocks of the Kirşehir Massif are the oldest units in the study area. The basement of the Massif comprises Paleozoic metamorphic schist and marbles which partly contain white quartzite layers of a few tens of cm thickness. The metamorphic schists which are cut by granites of Paleocene age are overlain by horizontally bedded conglomerate, sandstone, claystone, and limestone of upper Paleocene-Eocene age. Among the thermal and cold waters collected from the areas of Terme and Karakurt, those from thermal waters are enriched with Ca–HCO₃ and cold waters are of Ca–Mg–HCO₃ type waters. The pH values of samples are 6.31–7.04 for the thermal well waters, 6.41 for thermal spring, 7.25 and 7.29 for the cold waters, and 7.52 for the Hirla lake water. EC values are 917–2,295 μS/cm for the thermal well waters, 2,078 μS/cm for thermal spring, and 471 and 820 μS/cm for the cold springs. The lowest TDS content is from water of T10 thermal well in the Terme area (740.6 mg/l). The hot and cold waters of Terme show very similar ion contents while the Karakurt hot waters at western most parts are characterized by distinct chemical compositions. There is ion exchange in thermal waters from the T5 (5), T6 (6), T12 (7), and T1 (8) wells in the Terme area. The thermal waters show low concentrations of Fe, Mn, Ni, Al, As, Pb, Zn and Cu. Waters in the study area are of meteoric origin, and rainwater percolated downwards through faults and fractures, and are heated by the geothermal gradient, later rising to the surface along permeable zones. δ¹³C_VPDB values measured on dissolved inorganic carbon in samples range from −1.65 to +5.61‰ for thermal waters and from −11.81 to −10.15‰ for cold waters. Carbon in thermal waters is derived from marine carbonates or CO₂ of metamorphic origin while carbon in cold waters originates from freshwater carbonates.     

Glutamic Acid Modified Fenton System for Degradation of BTEX Contamination

The present study employed a modified Fenton system that aims to extend the optimum pH range towards neutral conditions for studying the oxidation of benzene, toluene, ethyl benzene, xylenes (BTEX) using glutamic acid (Glu) as an iron chelator. Addition of 20 mM Glu greatly enhanced the oxidation rate of BTEX in modified Fenton system at pH 5–7. A rapid mass destruction (>97% after 1 h) of BTEX as a water contaminant carried out in the presence of 500 mM H₂O₂, 10 mM Fe²⁺, and 20 mM Glu at pH 5 could be shown. The efficiency of this modified Fenton's system for mass destruction of BTEX in contaminated water was measured to estimate the impact of the major process variables that include initial concentrations of soluble Fe, H₂O₂, Glu (as metal chelating agent), and reaction time.     

On the geodynamics of the Alpine collisional granitoids from Central Anatolia: petrology,age and isotopic characteristics of the granitoids of the Ekecikdağ Igneous Association (Aksaray/Turkey)

Granitoids of the Ekecikda? Igneous Association (Central Anatolia/Turkey) are products of collisional–post-collisional magmatism in the Ekecikda? area. These granitoids are granodiorite, microgranite and leucogranite. Field relations of granodiorites with microgranites is obscured, but leucogranites intrude both rock types. Mean zircon laser ablation (LA)-ICP-MS ²⁰⁶Pb-²³⁸U ages of granodiorites and microgranites are 84.52 ± 0.93 Ma and 80.7 ± 1.6 Ma, respectively, and age of leucogranites is suggested as 80 Ma, based on field relations combined with ²⁰⁶Pb/²³⁸U and Rb-Sr ages. Crystallisation temperatures of granodiorites, microgranites and leucogranites are 728°C-848°C, 797°C-880°C, 704°C-809°C, respectively.

Geochemical characteristics including Sr-Nd isotopic evidences infer a non-cogenetic character, as there is a high crustal contribution in I-type granodiorite sources, a crustal source with insignificant and significant mantle inputs in S-type microgranites and leucogranites, respectively. LA-ICP-MS Lu-Hf isotope data from zircons reveal their crustal nature (εHf_(t): ?1.3 ± 0.5 to ?8.8 ± 0.5). Crustal melting linked to the Alpine thickening during the Late Cretaceous led to formation of heterogeneous sourced granitoids with crustal dominated sources in the Ekecikda? area. Understanding of the nature and evolution of collisional Ekecikda? granitoids is not only important to put contribution in the geodynamic evolution of Central Anatolia and surrounding Alpine area, but also to better understand systematics of collisional magmatic systems.     

Utilization of remote sensing data and GIS tools for and use sustainability analysis: case study in El-Hammam area, Egypt

The North-Western Coast of Egypt (NWCE) represents one of the high priority regions for future development in the country. El-Hammam area is located in the NWCE with an area of 94752 acres and is one of the main challenging regions for sustaianble development. In this study, we have used remote sensing and soil data in combination with GIS tools, for land use sustainable analysis (SLU) in El-Hammam area. The SLU was established based on various factors such as: land capability and suitability, water resources availability, economic return from water and financial return from land and water. A physiographic soil map for the study area was prepared using remote sensing and GIS. Multiple field surveys were carried out for collecting information on various soil map units (SMUs) and their profiles. Laboratory analysis for the collected samples was performed, and then the soil properties were stored as attributes in a geographical soil database linked with the SMUs. Furthermore, land capability assessment was done to define the suitable areas for agricultural production using a capability model built in ALES software. Results indicate that the area currently lacks high capability and moderate capability classes. By improving the soil properties, the soil can attain potential capability; and 55630 acres will become marginally capable. The assessment of soil physical suitability for different land use types (LUTs) were analysed in ALES software, in order to generate the most suitable areas. The results from the land suitability analysis indicated that, 17114 acres are moderately suitable for wheat and sorghum; whereas 15823 acres are moderately suitable for barley and 12752 acres are moderately suitable for maize, olive and figs. Finally, the SLU was investigated based on two scenarios; (1) the most SLU under the conditions of shortage of irrigation water: clover, barley and sorghum against figs, as the irrigation requirements for barley and sorghum are low; (2) the most sustainable land use in the conditions of irrigation availability will be wheat and maize against figs and guava. From the results it is quite evident that GIS combined with modeling approaches are powerful tools for decision making in the study area.