Late Cretaceous–Early Paleogene tectonic events at Farafra-Abu Minqar Stretch,Western Desert,Egypt: results from calcareous plankton

This work depends on integrated high-resolution calcareous plankton nannofossil and foraminiferal biostratigraphic analyses for three Upper Cretaceous-Lower Paleogene successions at Farafra-Abu Minqar area, Western Desert, Egypt. These sections are distributed in a north-south geologic profile as follows: El Aqabat, North Gunna, and Abu Minqar. Lithostratigraphically, four formations are recorded in the study area, namely, Khoman (at base), Dakhla, Tarawan, and Esna (at top). In the north at El Aqabat section, Khoman Formation (carbonate facies) is only represented which changes partially toward the south to Dakhla Formation (siliciclastic facies). In the extreme south at Abu Minqar section, it changes completely into siliciclastic facies of Dakhla Formation. Biostratigraphically, seven calcareous nannofossil and eleven planktonic foraminiferal zones represent the Late Cretaceous-Early Paleogene are identified. Based on the occurrence or missing of these zones accompanied with the field criteria resulted in detecting four tectonic events. These tectonic events took place at the Cretaceous/Paleogene (K/Pg), the Danian/Selandian (D/S), the Selandian/Thanetian (S/T), and the Paleocene/Eocene (P/E) boundaries. These tectonic events are related to the impact of the Syrian Arc System. Four sequence boundaries (SB1, SB2, SB3, and SB4) are defined in the Late Cretaceous-Early Paleogene sequence in the Farafra-Abu Minqar area.     

The <Emphasis Type="Italic">n</Emphasis>-alkanol paleoclimate records in two peat deposits: a comparative study of the northeastern margin of the Tibetan Plateau and Northeast China

A number of studies have revealed that the climate in the eastern margin of the Tibetan Plateau and Northeast China is sensitive to postglacial changes. Unfortunately, the link of the past climate evolution between the two regions is not well understood. In this study, two cores are analyzed to determine this link directly. The high-resolution n-alkanol distribution patterns from two typical peat sequences covering the past 16,000 cal years in the northeastern margin of the Tibetan Plateau and Northeast China, respectively, are closely examined by gas chromatograph–mass spectrometry analysis. In combination with other palaeoclimatic proxies, it is proposed that the n-alkanol average chain length and (C₂₂ + C₂₄)/(C₂₆ + C₂₈) ratio could reflect past climate changes in the two peat sequences. The n-alkanol proxies reveal several climatic intervals in the period from the last deglaciation through the Holocene. A comparison of n-alkanol records between the northeastern margin of the Tibetan Plateau and Northeast China indicates that the start and end of the warm Holocene Optimum differed at the two locations. The spatially asynchronous pattern of climatic change is possibly a result of different responses to change in solar radiation. The evolution of the Holocene paleoclimate is more consistent with changes in Northern Hemisphere solar radiation in Northeast China than on the Tibetan Plateau. The Holocene Optimum began and terminated earlier in Northeast China than in the northeastern margin of the Tibetan Plateau. Thus, the two n-alkanol proxies provide valuable insights into the regional Holocene climate and local environmental conditions.     

Aspects of sand behaviour by modified constant shear drained tests

Constant shear drained tests (CSD) are probably the most suitable to simulate the strength and deformation behaviour of soils in slopes under water infiltration conditions or lateral stress relief. This is significant because soil behaviour following a CSD stress path could differ from that of traditional compression triaxial tests. In this paper, CSD tests on sand following an alternative procedure are presented and discussed. The modified CSD tests were conducted by increasing the pore water pressure at a constant rate from one end of the specimen with water free to drain from the opposite end. Among the results from specimens consolidated at variable initial void ratios and principal stress ratios it was revealed that specimens showed a tendency to dilate even for loose sands; failure was reached at low axial strains; and a pre-failure type of instability could be identified. The modified procedure has the potential to provide new insights into the failure mechanisms of slopes under a water infiltration condition.     

Hydrogeochemical and isotopic composition of a low-temperature geothermal source in northwest Turkey: case study of Kirkgecit geothermal area

Chemical and isotopic compositions of three hot springs and one cold spring in the Kirkgecit geothermal field, located 15 km southwest of Canakkale-Biga in the northwest of Turkey, were monitored five times during 2005 and 2007. The physico-chemical characteristics of the hot springs are average discharge 3–3.5 L/s, surface temperature 45–52°C, pH 8.9–9.3, and electrical conductivity (EC) 620–698 μS/cm. The cold spring has a temperature of 12–13°C, pH 7.5–8.3, and EC 653–675 μS/cm. The hot waters are Na-SO₄ type, whereas the cold water is Ca-HCO₃ type. Chemical geothermometers suggest that the reservoir temperature is around 80–100°C. The isotopic data (oxygen-18, deuterium and tritium) indicate that the thermal waters are formed by local recharge and deep circulation of meteoric waters.     

2-D electrical imaging in some geotechnical investigation of Madhupur clays,Bangladesh

Electrical imaging or electrical tomography is a survey technique suitable for the investigation of areas of shallow complex geology, where the use of other electrical and electromagnetic techniques is less effective. An electrical image has been delineated at a site located in front of the Department of Geological Sciences, Jahangirnagar University, Dhaka, Bangladesh. 16 soil samples were collected from two boreholes located on the image line and geotechnical parameters such as unit weight, water content, grain size, plastic limit, liquid limit and plasticity index were measured in the laboratory. These geotechnical parameters were compared with the measured electrical resistivity.     

Methods of Three-part Quantitative Assessments of Undiscovered Mineral Resources: Examples from Victoria,Australia

Quantitative mineral resource assessments following the 3-part form rely on grade and tonnage models and probabilistic estimates of the number of undiscovered deposits. Assessments completed in Victoria, Australia, indicate that undiscovered mineral resources can be effectively estimated using grade and tonnage sub-models constructed using only medium- and large-tonnage deposits. Numbers of undiscovered deposits can be estimated on the basis of expert judgement or entirely by statistical means. Appropriate mathematical aggregation of individual expert views, expressed at interactive expert workshops, provides robust estimates of the number of undiscovered deposits. Underestimation of uncertainty, which is common in expert judgement, can be compensated by the statistical modification of individual interval estimates. In this study, the linear opinion pool was used as a simple and robust method of mathematical aggregation of multiple expert estimates of the number of undiscovered deposits. A general regression model, which estimates numbers of undiscovered deposits based on the size of the geologically permissive area and the median deposit tonnage, provided results generally compatible with those based on expert judgement or local deposit density models.     

Using simulated hydrologic response to revisit the 1973 Lerida Court landslide

Hydrologically driven mass wasting in the form of landslides on steep slopes is a worldwide occurrence. High-profile events in, for example, Brazil, Chile, the Philippines, Puerto Rico, and Venezuela during the last three decades all clearly illustrate, based upon significant losses of life and property, that hydrologically driven slope instability in developed (urban) areas can be a major geologic/environmental hazard. The focus of this study is the 1973 hydrologically driven Lerida Court landslide in Portola Valley, CA, USA. Physics-based hydrologic-response simulation, with the comprehensive Integrated Hydrology Model, was employed to forensically estimate the spatiotemporal pore pressure distributions for the Lerida Court site. Slope stability, driven by the simulated pore pressure dynamics, was estimated for the Lerida Court site with the infinite slope/Factor of Safety approach. The pore pressure dynamics for the Lerida Court site were reasonably captured by the hydrologic-response simulation. The estimated time of slope failure for the Lerida Court site compares well with field observations. A recommendation is made that hydrologically driven slope stability estimates including variably saturated subsurface flow be standard protocol for development sites in steep urban settings.     

Assessment of flexural analysis applied to the Sumatra-Java subduction zone

Indian Ocean subduction zone is one of the most active plate margins of the globe as evident from its vast record of great magnitude earthquake and tsunami events. We use Bouguer admittance (Morlet isostatic response function) in Sumatra-Java subduction zones comprising both the subduction and over-riding plates to determine the lithospheric mechanical strength variations. We determine effective elastic thickness (T _e ) for five oceanic windows (size 990 × 990 km²) by analyzing the admittance using Bouguer gravity and bathymetry data. The results show bimodal T _e values < 20 km for Sumatra and 20−40 km for Java. The lower bimodal values obtained for Sumatra appears to correlate well with the zones of historical seismicity. This is in sharp contrast with Java subduction zone, which shows higher T _e values (20–40 km) and apparently associated with low magnitude earthquakes. We suggest a strong and wide interseismic coupling for Sumatra between the subducting and over-riding plates, and deeper mantle contributing to low strength, shallow focus — high magnitude seismicity and vice versa for Java, leading to their seismogenic zonation.